LWSS Shimla Town (SH Jacketing of Water of Storage Tank to plug leakages 300000 Ltr. Capacity at Corner House, 350000 Ltr. Capacity at Upper Dhingu and 240000 Ltr.Capacity at Lower Dhingu).

Amount

Providing and fixing water holding membrane/jacketing liner for wall and bottom laminated high density polyethylene (HDPE) Fabrics for lining Woven Fabric with BIS standard IS 15351:2015 Type II 500 Micron,NSF/ANSI Standard 61 certification, (Typical Value) 415g/m2, Nominal Thickness ASTM DI 777 (0.6mm), Hydrostatic Resistance ASTMD751 525lb/m2, Hydraulic Conductivity ASTM E96 (B) 1.0-14 cm/s strip Tensile strength ASTM D7003 MD 265 (IBg), Trapezoidal Tear ASTM D4533 63(IBf) Low Temperature Brittleness ASTEM D 2136 Pass @ -60 degree) Grab Tensile Strength (MD) ASTM D751 385 lbf including drilling suitable holes in reinforced of plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams,lintels, columns and slabs to introduce steel bars for sunshades balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement including cost of bolts etc.The bolts are manufactured using rust proof passivity steel, and are yellow zince plated to give additional.Our bolt kit includes a nut and 3 malleable iron expansion segments connected together by a ring.These anti-vibration nature bolts ensure safe working and can screw fasten conc. and rock including erecting,maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-Charge 26 36 1 Wooven PVC cloth as per direction of the Engineer-in-Charge complete in all respect including all leads and lifts and carriage of material to the site of work.

Providing and laying, fixing wall protection layer Non Woven Gerotextile 300 gsm thickness ASTM B 5199 21 mm MASS ASTM D 5261300 GM/M2, Wide width tensile elongation ASTM 4595 50/50%, grab tensile strength md ASTM D4632620 N. Trapezoidal tear strength ASTM D4533 MD 300 N, Mullen Burst ASTM D3786 250 PSLCBR Puncture strength ASTMD6241 1900N, Floor rate (5cm head) ASTM 4491 125L/S M2, UV Resistance ASTM G154@ 500Hrs >=50% as per direction of Engineer-in-charge. complete in all respect including all leads and lifts and carriage of material to the site of work including cutting holes of required size with CC 1:2:4, P/F MS sheet of required dia including cutting and placing in position, P/F MS/GI pipe for inlet, outlets, over flow of required dia & length with welding by gas or electric as per the site requirement.

At Corner House Tank

At Dhingu Upper Tank

At Dhingu Lower Tank

Mohinder Sharma