SPECIAL REPAIR TO FLOORING AND PANELLING OF BLDG NO KG-57 AT KELVIN GROVE UNDER GE (I) JUTOGH

Dismantling of RCC shelf other than ground floors and similar suspended works complete all as specified and directed.

M&L for RCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in shelves/ slabs/ beam/ columns/ foundation and like with and incl use and waste of necessary form work complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately.

S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sqm in each pane, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.

S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board, valley gutter etc, fixed all as per manufactures's instructions, fixed with self tapping screws as directed at site with suitable arangement as required, complete all as specified and directed.

Dismantling of boarding of any description and in any position complete all as specified and directed.

Dismantling timber scantlings in any position in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L of standard size (100mmx12mm), wood panelling refers to wall/ ceiling covering made made from pine wodd planks, featuring a light,natural colour with visible grain patterns and knots fixed with self tapping screw on wood frmae work etc. complete all as specified and directed.

S&F 30mm thick IInd class hardwood wooden planks,width n.exc 20cm etc, complete all as specified and directed.

S&F in repair 4.5mm thick 100% PVC synthetic mat with standard line marking and incl all necessary materils required for proper surface finished, shade approved by GE,etc complete all as specified and directed. Note:- (i) Minimum weight of as per above thickness i.e. 65kg/roll. (ii) The mats hould have been approved by BWF as grade/level & warranty for 5 yrs from the date of actual completion. (iii) The courts mats must be within permissible limits set by BWF for standards releted to friction,shock absorption and slip resistance. (iv) The mats should be installed in copmlete aspect and as per the direction of the auth.

S&F Mild steel butt hinges medium weight, clod rolled, 100mm, ISI marked, complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains, incl fair finished & necessary form work complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to w

S&F 110mm dia PVC (SWR) "P" /'S' trap single, equal or un equal of any length including jointing with solvant cement as required complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with SS grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified and directed.

M&L for preparation of new steel surfaces including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends with oval access/plain door with rubber ring joints fixed as required complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250), quality-A etc., complete all as specified and directed.

M&L for 2nd class HW clean Sawn timber scantling/ posts complete all as specified and directed.

Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc., complete all as specified and directed.

S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type, complete all as specified and directed.

S&F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal, complete all as specified and directed.

S&F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked), complete all as specified and directed.

S&F LED inverter batten tube light along with fixture, 1x 20 watt, (4 Feet) wall mounted LED batten, with diffuser, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

All as per Srl Item No 94.00 above but for one 3 pin 15 Amps power point on independent board with 4.0 Sqmm size FRLS-H PVC insulated unsheathed multistranded copper conductor cable and with 4.0 Sqmm FRLS-H, PVC insulated unsheathed multistranded copper conductor as earth wire, complete all as specified and directed.

S&F in replacement 36W LED(4 x 1) surface / Recess mounting luminaire suitable for hanging on any surface including connecting twin core cable up to nearest point complete with separate electronic driver & high brightness LEDs white colour complete all as specified and directed.

S&F for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 13 sqcm and not exc 25 sqcm complete all as specified and directed.

S&F in replacement 36/40W LED (Size 2'x2') square shaped Recess mounting type luminaire having white polycarbonate body & Alumium heat shink with PMMA diffuser, 5700K including connecting three core copper cable up to ceiling rose complete with separate electronic driver & high brightness LEDs white colour complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

M&L for LED 15 Watt lamp, complete all as specified and directed.

S&F LED tube light along with fixture, 1x 10 watt, (2 Feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

M&L for lamp holder (Angle) PVC /Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F LED inverter building security light 25 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F LED flood /focus light in die cast powder coated aluminium body & IP 66 protection 180 watt, 220 V, 120 Lm/Watt AC including connecting up with three core flexible copper conductor cable of suitable size complete and including taking down old unsv existing fittings complete all as specified and directed.

S&F LED inverter light fitting 20W bulk head luminaire including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv existing fittings complete all as specified and directed.

ushed on walls including cutting Knitch and making good disturbed surfaces, complete all as specified and directed. Make : L&T / Legrand / Schineider.

S&F 10 Sqmm flat twin core, 1100 Volts grade, stranded, heavy duty, cable PVC insulated aluminium conductor, weather proof and incl fixing all arrangements, complete all as specified and directed.

S&F in repair surge protection device (SPD) voltage protection level Up upto 1.3kV, suitable for protection of all terminal equipments both common & differential mode protection complete all as specified and directed.

S&F exhaust fan made of study engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300MM incl fixing all arrangements cutting of existing wall/ roof, etc., complete all as specified and directed.

S&F exhaust fan, AC single Phase 230/ 240V of size 300mm sweep metal body with louvers incl fixing all arrangements cutting of existing wall/ roof, etc., complete all as specified and directed.

S&F MCB, TPN (Triple pole Neutral) 40/63 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider.

S&F MCB, SP (single pole) 05 to 32 Amps, 10 kA, B Curve for inductive load connected through cable lugs of suitable size, complete all as specified and directed. Make : L&T/ Legrand/ Schineider.

All as per Srl Item No 125.00 above but for using galvanised iron strip 32x6mm as earthing lead, complete all as specified and directed.

S&F sheet metal enclosure MCB, DB, 8 way, SPN, double door suitable for 240 V, 200 amps, IP-54, rated bus bar/ DIN rail, fixed and fl

S&F MCB, SPN (single pole and neutral) 40 Amps for inductive load connected through cable lugs of suitable size, complete all as specified and directed. Make : L&T/ Legrand/ Schineider.

S&F 4 Pole, MCCB, 63 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider.

M&L for submain wiring with 2X6.0 Sqmm+1X6.0 Sqmm Earth Wire single core PVC insulated FRLS-H, PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC conduit, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run PVC conduit/ casing shall be measured one unit length.