SPECIAL REPAIRS TO BLDG NO T-1(A) AND T-2 OF 414 AND ROOF TREATMENT OF BLDG NO P-76, 77, 78, AND 81 OF GOVT MD ACCN AT R LINES AND PROVN OF GLASS DOOR IN AFI BLDG FORT AREA AND PROVN OF SCOOTER AND CYCLE SHED NEAR BLDG NO P-15 OF CERTAN UNIT UNDER GE

Amount

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6) complete.

All as item No 02 above but as in skirting with 10mm backing in cement mortar 1:4 complete.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

Material & labour for glazed ceramic coloured tiles 300mmx450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:4 finished even and fair complete all as specified.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for pre-polished Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base 20mm thick in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing complete, all as specified and directed.

M&L for pre-polished Machine cut Kota stone slab 18-25 mm thick in riser of steps, skirting, dado and pillar 10 mm thck back plaster in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab complete, all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform/shelves over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as directed.

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A.complete all as specified and directed.

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering.complete all as specified and as directed

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw complete all as per manufacturer instructions.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of on colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping screw complete all as per manufacturer instructions.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 28mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed (Note : GI frame work will be measured and paid for separately)

5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. complete all as specified and directed

M & L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Demolition of RCC in any description and in any position and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m as directed by the Engineer in Charge.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.

M&L RCC 1:2:4 type B1 ( 20mm graded stone aggragate) for slab supported on walls, beams and coloumns in floors roofs, landings, balconies, canopies,deck slab and in shelves and the like.

M&L for providing precast RCC cover slabs 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:4 as in (for drain, man holes etc) and similar articles with plain faces and each cover slab covered in 6 Nos loop holes complete all as specified and directed

M&L for Formwork to edges of concrete flats ,thread breaks in floors, openingg in concrete walls ,floors exc 5 cm and not exc 10 cm complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete /sub base complete all as specified and directed.

Material & labour 75 mm th PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mastic filling in the joint complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick complete all as specified and directed . Note : Sand cushion will be measured and paid separately

M& L sand filling under cushion of paver blocks complete all as specified and directed

M&L for providing cement concrete1:3:6 type C1 (20mm graded aggregate) as in copings,plinth courses including weathering,slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 34 here-in-above but half brick wall in CM 1:4.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L rendering 10mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specifed and directed.

M&L rendering 10mm thick on surfaces of ceiling in cement mortat (1:3) and finished even and smooth without using extra cement complete all as specifed and directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on fair faces of bick work or concrete surfaces with CM 1:4 with liquid WPC on external walls finished even and smooth (without using extra cement) cement complete all as specified and directed.

M & L for prepartion of new plastered surface and applying two coats of oil bound distemper over a coat wall care putty complete all as specified and directed.

M & L for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of cement Primer and wall care putty complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed

M&L complete removal of existing treatment of old plastered surfaces on wall including brooming down or steel wire brushing ,scraping down moulds , washing down and applying two coats of exterior grade acrylic emulsion weather proof paint over a coat of acrylic primer complete including scaffoldings etc all as specified and directed. ( Make of paint : "Apex ultima" of Asian Paints)

Material & Labour for preparation of new plastered wall surfaces and applying two coats of exterior grade acrylic emulsion weather proof paint over a coat of acrylic primer complete including scaffoldings etc all as specified and directed. ( Make of paint : "Apex ultima" of Asian Paints)

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed

M&L for preparation of newly steel surfaces of any description over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed

All as per item No 48 here-in-above but of size exc 1.5 Sqm and n.exc 4 Sqm each.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

M&L for MS Framed work of Fe-290(Gde E-165)as in doors or gates of angle or other section with gusset plates, rails, braces, MS Plates etc, complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeetc complete all as specified and directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F anodised aluminium frame for windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated aluminium door comprising with frame of size 100mm x 44mm x 1.59mm thick (approx) push /pull type glazed door shutter having top and bottom rail of section 82x44x1.59mm (appx) and 100 x 44 x 1.59mm thick (appx) respectively size of styles 82 x 44 x 1.59mm thick and lock rails of size 100mm x 44mm x 1.59mm thick (appx) including all necessary jointing cleats, rubber packing, anodized aluminium beading for fixing glass pane and including 5mm thick tinted glass in both panels, hinges, hydraulic door closer, mortise lock, stays, door stoppers and aluminium push handles of size 150mm etc complete all as specified and directed.

Supply, Fabrication and fixing anodised Aluminium windows, ventilators shutters, sliding type without sash bars, alumiium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21, 100mm long (2 No) suitable handle (1 No) complete all as specified and directed . Note:- Glazing/gauzing shall be measured and paid for separately under respective items

S&F in repairs 5.5 mm thick tinted sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square exc 0.5 sqm in each pane

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed

S & F 4 mm thick sheet glass ordinary quality, glazing with oil putty and glazing pin and wood bid in square n. exc. 0.5 sqm in each pane as directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F 100mm long medium weight cold rolled mild steel butt hinges complete all as specifed and directed.

Supply & fixing 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F 150 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S & F in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparaton of surfaces all as specified and direcet.

M & L for preparation of new steel surfaces of any description not otherwise described, exc. 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer.

M & L for preparation of old steel surfaces of any description not otherwise described, exc. 10 cm width or girth & applying with one coats of synthetic enamel paint.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in cement mortar 1:3.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall and connection complete all as specified

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall and connection andcomplete all as specified

Refixing 15 mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.

Refixing 20 mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.

S&F in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified

Supply & fixed in repairs Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F Pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed make seiko complete all as specified and directed.

S & F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete

S&F in repairs stop valve 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type.

S&f in repairs 20mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and as directed.

S&F for fancy type curtain brackets approved quality fixed to wall with screws complete all as specified and directed.

S &F Towel Rail 20mm dia of Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed.

S&F sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm incl waste pipe 32mm dia complete all as specified and directed.

S & F waste fitting, 40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut compete.

S&F in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

S&F PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specifed and directed.

S&F CP grating of size 100mm dia complete all as specifed and directed complete

Dismantling of water tanks and removing to store exc. 250 ltrs & not exc. 500 ltrs complete all as specified and directed.

S&F Rotational moulded (three layers, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes as specified in SSR Part I complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 ltr hoisted and fixed in position incl top cover incl dismantling of water tank all as specified in SSR part-I

Disconnecting existing tanksm setting aside (or lowering if required) for reparis, cleaning , etc and hositing if required recnnecting and re-fixing in position (Cleanng reapiring etc. measured separately) exc 250 & n exc 500 liter

S&F in 20 mm bore ball valves. high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete. Make : Prayag

S&F in repairs Gun-metal, globe or gate valves, 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

S&F in repairs 18/19mm thick prelaminated particle board, as in cupboard , palmet interior grade prelaminated one sides with decorative choice lamination other side balancing white lamination, fixed with screws to timber frame work / mild steel framing/ 6mm thick first class H/W leaping on bare edges complete all as specified and directed.

S & F in repairs Continuous (piano) hinges, 30 mm wide flap mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repairs 125mm long aluminium anodised Hasp and staple, safety type, including bolt to hinge plate and fixed with screws

S&F in repairs 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S & F in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified.

S & F in repairs chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete.

S&F in repair long shank and cup (concealed type) stop valve 15 mm dia Chromium plated fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed.

M&L 10 to 12mm thick froasted toughend glass fixed to door, window or any other location including brackets, supports, handles, lock, floor springs and other accesaries as required completed all as specified and directed.

M&L 10 to 12mm thick froasted toughend glass fixed as partition or any other location including brackets, supports other accesaries as required completed all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for providing, cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in coping coving, roof padding, padding in sunken slab, as drecting mised with liquid water proofing compound (liquid WPC shall be measured as paid seperately under respecitive item)

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sqm over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with WPC and aluminium paint total 200 gram/spm total 200 gram/sqm in two layers over membrane complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L RCC 1:2:4 type B1 ( 20mm graded stone aggragate) as in seismic and other similar bands, plinth courses, lacing courses parapets copings, kneelers, bed plates etc complete all as specified and directed

Supply only liquid integral water proofing admixture of make pidilite or its equivalent.

Material & labour for preparation of new undecorated plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and as directed

M&L for Preparing new plastered surface and applying two coat cement base paint over a coat of primer complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement motor 1:3 complete all as specified and directed

S&F wire netting of galvanised steel wire 0.71mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM (1:3) complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality B complete all as specified and directed.

S&F 11 to 15mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screws both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm not exc 10 cm long complete all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc n.exc 10 kg each brackets, conforming to Fe-290. Gde E-165 complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 127 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 127 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 127 above but one 3 pin 5 amp socket out point on the independent board with other switches complete all as specified and directed.

All as per item No 118 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

S&F fan step regulator, 120 watt, 2 module complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note :- (i) Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. (ii) 1x4 Sqmm + 2x4 Sqmm wire + 1 Run PVC conduit pipe shall be measured in one unit RM.

S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F ceiling rose surface type 3 terminal 5 amps complete all as specified and directed.

S&F 18-22 Watt LED tube light fittings complete with aluminum body including tube rod, dirver with not less than 2000 Lumen O/P and l/p rated voltage 240 V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

S&F LED baton fitting 2' length including drivers having energy consumption, 10/11W, 230V, 50Jz, 3500K, not less athan 800lumen prewired, compted all as specified and directed Make :- Bajaj/Syska/Wipro/Jaquar

S&F LED luminaires 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED light fitting 10W bulk head luminaires with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable of suitable size of 230V 50Hz complete all as specified and directed. Make: Bajaj Cat No BIBWP 10W / CG Cat No LBHP 10 CDL / Wipro / Philips / Surya

S&F building security light LED 25 W with Lumen O/P 1800 with driver with rated cvoltage 240 V, 50Hz, including mounting GI (made out of 25mm dia grade pipe 0.8 m bent two shape including FI clamps nout bolts etc complete all as specified and directed. Make : CG LSTS-25-CDL/Philips/Wipro

S&F ceiling fans, complete with three blade, down rod, acessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified and directed

S&F exhaust fan metallic body 300mm sweep single phase, 230 volts 50Hz with nut and bolts washers etc and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose and making holes complete all a sspecified and directed. Make : Bajaj/CG/Havells

S&F Sheet metel encloure for triple pole and nutral 4 way, 415 valts, 50Hz, double door, made out of CRCA Sheet complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrand / Hegger/L&T

S&F MCB triple pole & neutral 240 volt 6 to 40 amps 10 KA complete all as specified and directed. Make :- Legrand / Hayger /L&T

S&F MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:- Legrand / Hayger / L&T

S&F MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:- Legrand / Hayger / L&T

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete (1:2:4) type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.42,304.00]

M/s Rahul Traders

chronicle enterprises

M/s Shrangi Rishi Construction

M/s S. S. MUNDE

Bidder Name

M/s Shrangi Rishi Construction

chronicle enterprises

M/s Rahul Traders

M/s S. S. MUNDE

M/s T.S.JOHAR