Detailed survey designing and drawing cons of RCC ESR Compond Wall Clear water rising main and distribution road crossing house connection five year OM etc all complete job for Karaunjiya 6 nos adjoing village RPWSS under DWS Div JMT on Turnkey basis

Amount

Elevated Service Reservoir

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and equipment for designing & construction of ESR all complete job. (Please refer to Section 5,Sl. 2.8 of SBD)

i) ESR 100 KL Capacity. Staging ht. 19 m

ii) ESR 125 KL Capacity. Staging ht. 24 m

Mechanical & Electrical Work for Pump house at Existing Sump well

Suply, installation, testing and commisssioning of horizontal casing centrifugal pumpsets with alied equipment as (Please refer to Section 5,Sl. 2.5 & 2.6 of SBD)

Centrifugal Pump : Horizontal Split Casing/ Multi Stage Centrifugal Pump [make: Kirloskar/ Worthington/ Mather & Platt] , capable of discharging- as below. mounted on common base plate and coupled with IE 3, squirrel cage induction motor, rating of motor 20% more BHP than that of pump, operating on 1500 rpm, 415V, 50Hz [make:Kirloskar/ABB/ Crompton Greaves/BHEL] pressure gauge, required size of sluice valve and non-return valve, standard fittings etc. including construction of MS Suction and delivery line common header, jointing it with Suction and Delivery line by providing required MS/CI pipes, flanges,reducer and specials, nuts bolts, packings etc. all complete as per the requirement, standards and instruction of E/I.(Contrator will again have to check the design of motor,pump & he will to get it approved by the Deptt.)

Discharge :- 530 LPM, Head :- 48m

Cable:- Power wiring with required 50Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables, XLPE/PVC insulated armoured cable from Transformer to MCP at Raw Water Pump House. Laying, jointing and making proper terminations,etc. all complete.

Cable:- Power wiring with required 10 Sq mm 3 core 1.1KV grade Unarmoured Copper cables, XLPE/PVC insulated Unarmoured cable from Power distribution Panel (MCP) to Motors, including laying on wall or on floor as where required, jointing and making proper terminations,etc. all complete.

Earthing: making earthing as per IE Rule & IS 3043 for each motors.

Servo controlled automatic voltage stabilizer : Providing, erecting servo controlled automatic voltage stabilizer (output 415+/-1%) 3ph, 50Hz, with copper would transformer Air cooled of 30 KVA, etc all complete with change over switch, earthing and all accessories.

Crane:Cost of 1T Triple spur type chain pulley block suitable as below with 6m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carry ISI etc. all complete job,as per the site requirement, with travelling trolley

Construction of DP structure with different type of MS channels, M.S. angles, brackets, insulators, three set of horn gape fuse and lightening arrester, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material labours, cost of providing disc & pin insulator for HV and LV side of the transformer, testing of dielectric strength of transformer oil etc. for transmission of power. All complete job as per I.E. rules and specification of Jharkhand state electricity board etc all complete far the above mentioned transformer.

Supplying, delivery and installation of fire Extingusher, first aid box , Gloves, rubber mats, lightening arrestor for pump house etc.as per site requirement & direction of E/I.

Clear Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Clear water Rising Main (Please refer to Section 5,Sl. 3.0 of SBD)

Providing and Supplying ISI marked centrifugally cast (spun) Ductile Iron Pipes of 100mm ad above all diameter for water supply with socket and spigot ends confirming to IS:8329/2000 in standard lengths of 4.5, 5.5 & 6.0M for classification K-9 suitable for push on joint (rubber Gasket D jointing) with cement mortar lining on inside the pipes with outside zinc and bituminous coating. (including cost of one No. Gasket for each pipe) (Rates are FOR Jharkhand but exclusive of GST)

DI Pipe 100 mm dia class K-9

DI Pipe 150 mm dia class K-9

Providing and supplying ISI standard D.I. specials and fitting with rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores/ site, loading, unloading including all taxes, etc. complete as per I.S. 9523

Providing double flanged sluice valve confirming for IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle caps including all transportation etc. complete PN-1.6 without bypass arrangement

Sluice Valve (100 mm dia)

Sluice Valve (150 mm dia)

Providing and supplying air valves as per IS-14845-2000 and MJP's standard specifications of approved make and quality of following diameters including all taxes (central and local), railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation transportation upto departmental stores/site unloading and stacking etc. complete. (Air Valve Single Ball Flanged /Screwed Type -PN -1.6)

Air Valve - 25 mm

Earthwork in excavtion ( as per IS 3114/1965) for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of engineer -in -charge

for classification of soil item-A

for classification of soil item-B

Earth Work in excavation of foundation trenches as per design section in ordinary or soft rock (vide classification of soil item-C) and disposal of excavated materials so obtained with initial lead of 10M and initial lift of 1.5m as per ecification and direction of E/I. (in ordinary or soft rock where blasting is not required)

Excavation in road - Supplying tools and cutting road as well restoring the same as per specification and direction of E/I

a) Pucca road (except black top only taken out materials to be used) for cutting road as per requirement

b) Water bound macadum road (taken out materials to be used) for cutting road as per requirement

Dismaitaling Plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of un- serviceable materials with all leads all complete as per direction of E/I

Supplying labours, tools, tackles, lubricant etc for laying and jointing C.I.S/S tyson pipes ( class LA ) trenches supplying rubber gasket ( rubber gasket confirming to I.S.S.-5382-1969) and making gasket joints including providing night guard barrier and red light to safe guard against accident , all complete ( pipe to be supplied departmentally free of cost and laying of pipes is to be done as per ( I.S.S.-3114-1985) as per design , specification and direction of E/I. With out gas kate.

150 mm dia DI K-9

100 mm dia DI K-9

Providing laying and fixing in proper alingment in position all types of DI air valves as directed by engineer- in - charge including cost of conveyance from store to site of work , cost of all material and giving satisfactory hydraulic testing etc. complete for all class of valve

25 mm dia

Supplying labour and tool for fixing DI sluice valve trenches with a pair of DI tail pair including making flanged joints as per iS specification, including flanged joists as per IS specification confirming to I.S.S. 782-19978 confirming to I.S.S. 6557-1972 and nuts and bolts confirming to I.S.S. 1364-1983. including drilling holes in flanged if required as per specification and direction of E/I. ( sluice valve and pieces to be supplied departmentally free of cost).

100mm dia sluice valve

150mm dia sluice valve

supplying labours, tools and tackles for testing of lead C.I. or D.D. or U.P.V.C. or H.D.P.E. or A.C. Pressure pipe upto 60 mtr head of water all complete as per specification and direction of E/I ( water to be supplied free of cost departmentally)

100 mm dia

150 mm dia

Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of engineer-in charge (for classification of soil item A & B)

Providing PCC M-15 in nominal mix of (1:2:4) in foundation with approved quality of stones chips 20 mm -6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening shuttering mixing cement concrete in mixer and placing in position vibrating Striking cuiring taxes and royalty all complete as per building specification and direction of E/I

Construction of B.W.masonry valve chamber of size 1.20x0.90x1.50 mt.

Supply all materials & construction of Thrust Block of RCC M - 200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone all complete job as per specification and direction of E/I.

Providing removable mechanism type Bulk water meter as per IS 4064 150mm dia

DISTRIBUTION MAIN

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of DI class K-7 pipes with Cement Mortar Lining for distribution main (Please refer to Section 5,Sl. 3.0 of SBD)

Providing and Supplying ISI marked centrifugally cast (spun) Ductile Iron Pipes of 100mm ad above all diameter for water supply with socket and spigot ends confirming to IS:8329/2000 in standard lengths of 4.5, 5.5 & 6.0M for classification K-7 suitable for push on joint (rubber Gasket D jointing) with cement mortar lining on inside the pipes with outside zinc and bituminous coating. (including cost of one No. Gasket for each pipe) (Rates are FOR Jharkhand but exclusive of GST)

DI Pipe 100 mm dia class K-7

DI Pipe 150 mm dia class K-7

DI Pipe 200 mm dia class K-7

Providing and supplying ISI standard D.I. specials and fitting with rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores/ site, loading, unloading including all taxes, etc. complete as per I.S. 9523

Providing and supplying ISI standard D.I. specials and fitting with rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores/ site, loading, unloading including all taxes, etc. complete as per I.S. 9523

HDPE - 75mm dia

Providing Double Flanged Sluice valve confirming for IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete. Sluice /Scour valve PN -1 (without by pass arrangement)

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing removable mechanism type Bulk water meter as per IS 4064

150 mm dia

200 mm dia

Earthwork in excavtion ( as per IS 3114/1965) for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of engineer -in -charge

for classification of soil item-B

Earth Work in excavation of foundation trenches as per design section in ordinary or soft rock (vide classification of soil item-C) and disposal of excavated materials so obtained with initial lead of 10M and initial lift of 1.5m as per ecification and direction of E/I. (in ordinary or soft rock where blasting is not required)

Excavation in road - Supplying tools and cutting road as well restoring the same as per specification and direction of E/I

a) Pucca road (except black top only taken out materials to be used) for cutting road as per requirement

b) Water bound macadum road (taken out materials to be used) for cutting road as per requirement

Dismaitaling Plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of un- serviceable materials with all leads all complete as per direction of E/I

Supplying labours, tools, tackles, lubricant etc for laying and jointing C.I.S/S tyson pipes ( class LA ) trenches supplying rubber gasket ( rubber gasket confirming to I.S.S.-5382-1969) and making gasket joints including providing night guard barrier and red light to safe guard against accident , all complete ( pipe to be supplied departmentally free of cost and laying of pipes is to be done as per ( I.S.S.-3114-1985) as per design , specification and direction of E/I. With out gas kate.

100 mm dia DI K-7

150 mm dia DI K-7

200 mm dia DI K-7

Supplying labours & tools for laying and jointing H.D.E.P. pipes in trenches and making butt welded joint. Supplying heating mirror jack etc. and providing night guard barrier and red light to safe guard against accident all complete as per specification and direction of E./I.

HDPE - 75mm dia

Labour charge for cutting of cast iron/DI pipe and specials including supplying necessary tools and plants ,chipping or filling the surface finish as per specification and direction of E/I

Labour Charge for cutting of HDPE /UPVC/AC pressure pipe --do-- as in item 3.1.43 as per specification and direction of E/I.

HDPE - 75mm dia

supplying labours, tools and tackles for testing of lead C.I. or D.D. or U.P.V.C. or H.D.P.E. or A.C. Pressure pipe upto 60 mtr head of water all complete as per specification and direction of E/I ( water to be supplied free of cost departmentally)

75 mm dia - HDPE

100 mm dia - K7

150 mm dia - K7

200 mm dia - K7

Supplying labour and tool for fixing CI sluice valve trenches with a pair of CI tail pair including making flanged joints as per iS specification, including flanged joists as per IS specification confirming to I.S.S. 782-19978 confirming to I.S.S. 6557-1972 and nuts and bolts confirming to I.S.S. 1364-1983. including drilling holes in flanged if required as per specification and direction of E/I. ( sluice valve and pieces to be supplied departmentally free of cost).

80mm dia

100 mm dia

150 mm dia

200 mm dia

Providing PCC M-15 in nominal mix of (1:2:4) in foundation with approved quality of stones chips 20 mm -6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening shuttering mixing cement concrete in mixer and placing in position vibrating Striking cuiring taxes and royalty all complete as per building specification and direction of E/I

Construction of B.W.masonry valve chamber of size 1.20x0.90x1.50 mt.

Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of engineer-in charge (for classification of soil item A & B)

Pump House

E/W in Excavation in foundation trenches in ordinary soil (Vide classification of soil Item -B) & disposal of excavatd earth obtained to a distance up to 50 M including all lift leveling ramming the foundation trenches removing root of trees scrubs all complete as per approved design.

Providing ,coarse clean sand in filling in foudation trenches /in Plinth including ramming & watering in layers not exceeding 150 mm thick with all leads lift including cost of all materilas ,labour , royalty & taxes all complete as per building specification & direction Of E/I

Providing designation 75 A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I

Providing P.C.C M-100 in nominal mix of (1:3:6) in foundation with appoved quantity of stone metal (50 mm 25 mm dia size)graded & clean coarse sand of F.M 2.5 to 3 including screening , shuttering , mixing cement concrete in mixer & placing in position , vibrating , striking , curing taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M. (1:6) in foundation 7 Plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including Providing 10 mm thick mortar joints ,Cost of screening , materials , Scaffolding , raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I

Providing 25 mm thick damp proof coarse with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to3 including screening , shuttering mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position , vibrating , striing , curing , taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing10 mm thick motar joints ,cost of screening , materials, scaffolding,raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in lintel level with approved quality of stone chips 20 mm to 6mm size graded & clean coarse sand of F.M 2.5 to including screening , centring, shuttering and mixing cement concrete in mixer & placing in position vibrating striking curing (but excluding the cost of reinforcement ) taxes & royalty all complete as per building specification of (E/I.

Providing average 63 mm thick R.C.C M -200 with nominal mix (1:1.5:3) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete , screening , centering shuttering & mixing cement concrete in mixer & placing in position vibrating ,striking ,6 mm cement plaster (1:4) in celling & sides of chajja with sand of F.M 1.5, Curing ( But excluding the cost of reinforcement ) taxes and royalty all complete as per building specification of E/I

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size Graded & Clean coarse sand F.M 2.5 to including making drip course in cocrete , screening , concreting , shuttering , centring mixing cement concrete in mixer & placing in position , vibrating ,striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building Specification & direction of the E/I

Providing Tor steel reinforced as per approved design and drawing excluding carriage of steel to work site including cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I @ 1.2% of concrete quantity

Supplying fitting and fixing fully glazed steel door window or ventilators of standard rolled Z and mullion steel section and sizes as per I.S.-1038 joints met and welded with 100x16x3 mm MS lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidized iron fitting with hinges, handle per teps, catch springs 3mm thick plain glass panes with Aluminium beads and inner frame fixed with lugs of 20 mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint,carriage to work site hoisting and placing in position in all storey and taxes all complete as per building specification and direction of E/I

Supplying fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2 mm at 100 mm .Centers and braced with M.S. flat diagonals 20x3mm with top & Bottom rails of T-iron 40x40x6 mm with 38 mm dia steel pulleys complete with bolts, nuts locking arrangement stoppers handles including applying a priming coat of red lead paint, carriage hoisting and taxes all complete as per building specification and direction of E/I.

Providing 6 mm thick cement plaster (1:4) in celling with approved quality of clean coarse sand of F.M 1.5 including screening , curing with all leads & lifts of water , scaffolding , taxes & royalty all complete as per building specification & direction of E/I

Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M 1.5 including screening, Curing with all leads & lifts of water, Scaffolding, taxes & royalty all complete as per building specification & direction of E/I.

Providing neat punning a dado 6" (150 mm) high a side room and out side wall upto plinth level includng screening, curing with all leads & lifts of water, scaffolding, taxes and royalty all complete as per building specification & direction of E/I

Earth work in filling in foudation trenches & Plinth in layers not exceeding 150 mm thick well watered ,rammed ,fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I (Mode of measurement compacted volume)

Providing average 150 mm thick dry rammed khoa bitten to 112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads making proper slope and blending the top with cement mortar (1:10) all complete as per building specification and direction of E/I.

Providing 25 mm thick . First class patent stone flooring (1:2:4) with stone chips in two layers ,bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in pannels including cost of curing , finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I

Providing all materials, labours & doing 2 (Two) coat of snowcem of approved shade and make over a coat of cement primer on new surface including the cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning , removing rust ,dirt ,scales ,smokes and grease and cleaning the surface thouroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 06 KM lead

Stone/Stone Chips 11 KM lead

RCC Boundry Wall (192.80 M Long)

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job.(Please refer to Section 5,Sl. 2.9 of SBD)

Earthwork in excavation in foundation isolated footing trenches in hard soil (Class A) and disposal of excavated earth as obtained to a distance of 50m. including all lift, levelling, ramming the foundation trenches. Removing roots of trees, shrubs all complete as per specification of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one brick on edge soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C. M150 in nominal mix of (1:2:4) in foundation with approed quality of stone metal grade-III (50mm to 25mm size) clean coarse sand F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complee as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete.

Providing RCC M-200 with nominal mix of (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete.

Providing RCC M-200 with nominal mix of (1:1.5:4) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete.

Providing RCC M-200 with nominal mix of (1:1.5:4) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete.

Providing designation 75A brick work in CM(1:6) in foundation and plinth with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10mm thick mortar joints, cost of screening, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I

Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification & direction of E/I.

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I 1.00% of RCC work

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Bricks 06 KM lead

COST OF GATE - 2 nos.

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete.

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete.

Providing R.C.C M - 200 with nominal mix of (1:1.3:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete.

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I 1.00% of RCC work Total RCC= 1.09X1.00%X7.85

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I

Supplying Fitting & Fixing M.S Grill gate with M.S grills made 20x6 mm m.s flat or 16 mm M.S Square bras fitted 25x25x6 mm M.S angle frame of Size 60x60x6 mm including cost of fabrication ,providing Necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of requried size applying a priming red lead paint over steel work taxes all complete as per drawing specification and Direction of E/I

Supplying all material labours and doing two coats of colour washing over a coat of white wash new surface with approved quality of lime including cost of cleaning surface throughly and removing the scales of smoke & mosh marks with jhama ,rubbing ,scaffolding washing of floor and taxes all complete as per building specification and direction of e/i same as item no 7

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Bricks 06 KM lead

House Connection for 1064 nos Consumer.

Earth Work in excavation in foundation trenches in hard soil vide classification item -B and disposal of excavated earth as obtained to a distance upto 50m including all lifts , levelling ,ramming the foundation trenches , removing roots of trees,shrubs

Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including costb of all materials labours , and direction of E/I.(mode of measurement compa

Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chpips 20mm to 6mm size graded and clean coarse sand of F.M2.5 to 3 including screening shuttering , mixing,cement concrete in mixer and placingin position , vibrat

Earthwork in back filling the trenches after laying of diffarent types and sizes of pipes with earth removed during excavation with in initial leasds and lifts as per specification and direction of E/I.

Procviding 12mm thick cement plaster (1:3) with clean coarse sand of F.M 1.5 with 1.5mm thick cement punning over it incliding screening , curing ,with all leasds and lifts of water, taxes and royalty all complete as per Specification and Direction of E/I.

Providing and supplying Blue MDPE pipe confirming to ISO 4427:1996 manufactured from virgin resin PE 80 food grade compounded raw materials having blue colour only assurance certificate from quality agencies like WRC/CIPET(India) / DVGM /KIWA/SPGN etc for uasge in drinking water with quality system . The cost shall include testing of all materials all taxes central , state, Municipal, Inspection charges transportation up to site , transit insurance, loading, unloading ,stacking etc complete as per building specification and directed.PN16(SDR-9) with ED

Providing and supplying GI (Tata and euivalent make ) pipe for uasge in drinking water with quality system . The cost shall include testing of all materials all taxes central , state, Municipal, Inspection charges transportation up to site , transit insurance, loading, unloading ,stacking etc complete as per building specification and directed.

Lowering laying jointing HDPE/MDPE pipes in proper position including all specials by compression fitting / Electrofusion and buttFusion jointing procedure including hydraulic testing as per relevent IS code complete with all materials for jointing procedures like Electrofusion machine, Electric mirror / Heater / butt fussion welding machine with hydraulic jack, Top loading clamp etc Pump and accessories for hydraulic testing and all Labours as directed by E / I as per IS 7634 part-2.

Supplying labours and tools for fixing G.I pipes with red lead and yarn of following nominal bore with screwed and socketed joints on wall , ceiling and floor including supplying and fittings of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threadings ends if required etc all complete as per specification and direction of E / I.

supplying and fixing of G.M. ferrule of approved make in existing C.I / D.I main including drilling and taping C.I / D.I main all complete as per specification and direction of E / I.

3 mm dia ferrule weight not less than 425 gm

Providing and fixing of G.M full way valve of approved quality all complete as per specification and direction of E / I.

20 dia and weight not less than 400 gm

Providing and fixing of male ended C.I. body brass spindle valve and seat Bib cock of approved quality all complete as per specification and direction of E / I.

15 dia and weight not less than 400 gm

supplying and fixing of G.I fittings of approved make all complete as per specification and direction of E / I.

20mm dia Elbow

15 mm dia Elbow

20 mm dia reducing shocket

20mm dia nipple

15 mm dia nipple

20 mm dia union shocket

15 mm dia shocket

20mm dia shocket

Carriage of materials-10%

Road Crossing

Installation of product pipe by Guided Auger Boaring method including making of entry and exit pits, all related civil works like excavation, shoring/strutting, etc. shielded excavation through auger boring process, lowering of pipe segments in the jacking pit , laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instructions of the Engineer IN Charge all complete except the cost of the pipe For passing of 500mm dia MS pipe below existing Rail line by Hydraulic Boring Machine. (In Stoney soil)

320 mm dia (O.D) & thickness-10mm

Manufacturing. Providing and supplying spirally welded No.-270 SI No-ERW/SAW/fabricated MS Pipes (Commercial Quality) made out of MS Plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size, rolling tack welding, assembling in suitable lengths to form pipes all continuous spritely/circumferential and longitudinal welding to form a pipe on automatic welding machine using electrodes having weld mark E7018 (Low Hydrogen electrodes) and forming "V" edge on both end of pipes, VAT and exice duty on material required, third party inspection charges insurance, lowering and laying to correct position on correct bedding or on pedestala or chair, field hydrulic testing at specified test pressure as per IS 5822 1994 sec 11 field welding to join pipes after laying, Radiographic (5% ) and ultrasonic (10%) testing of welds including all equipments submitting report, expert personnel required for submitting report, expert personnel required for testing, interpreting and submitti ng report along with devlop film where applicable all incidental charges etc complete as per IS-3589 2001 as per specification (No negative Tolerance in thickness is permissible)

320 mm dia (ID) MS Casing Pipes, thickness-10mm

Operation & Maintenance for Five years

O/M work with Labour component & Materials for 1st Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 2nd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 3rd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 4th Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 5th Year

As per SBD Section - 5 Clouse 9.10

Add 18 % GST

Add 1% Labour Cess

M/S S.K. CONSTRUCTION