Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹32.5 L
EMD Value
₹33,000
Closing Date
18 Sept 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE EWC Gorakhpur
Mohaddipur Gorakhpur
Increasing Capacity of S/s and other work in Deoria District
2023_PVVNV_837421_1
20/EWC(G)/2023-24
Open Tender
Electrical Works
Item Rate
45 days
Gorakhpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SE EWC Gorakhpur
₹33,000
4 Oct 2023
13 Sept 2023
20 Sept 2023
13 Sept 2023
18 Sept 2023
13 Sept 2023
Amount
Work No. 01 Shifting & loading of following materials on private truck at store centre Deoria & carriage up to 33/11 KV Sub-Station Tarkulwa Distt-Deoria & Un-loading of the same with proper stacking (Distance about 0 to 29 km)
11 KV ‘XLPE’ Power cable.
33 KV ‘VCB’ complete with all structure
33 KV. C.T. with structure
33 KV Control panel for Single Transformer
33 KV line isolator 400 Amp
33 KV Bus Isolator 400 Amp.
Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection, Rail pieces and T/F shifting to another place by crane.
Providing & Making connection of Battery charger with 24 (12+12 volt) Volt battery ( Exide tubuler battery) with cabinet.(1 Set=2 No. Battery 12 Volt and 01 No. charger)
Dismantling of H.T. jumpers, 11 KV C/J kits & different earthings of existing 5 MVA T/F. Drain out of T/F oil After closing valves and opening of radiators for shifting of existing 5 MVA T/F from plinth by Crane about 30 mtrs distance & resetting of accessories etc. complete work
Providing & Making connection 33 KV PG clamp for jumpering of Busbar connection
Digging of pits for taking out of old, used and damaged 11 KV cable & making ring safely.
Providing & Making connection of Alluminium. Lug 3x300 mm2 for jumpering of 10 MVA T/F and Busbar connection
Dismantling of Bus bar Jumpers, different earthings of existing 5 MVA T/F. etc. complete work
Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
Laying of 11 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
Providing of 33 KV. Top channel for cable stand & neutral earthing
Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 indoor/outdoor.
Dismantling of existing pale fencing and resetting after completion of trnasformer work.
Erection and grouting of “VCB” Structure, mounting and fitting of “VCB” on erected structure, earthing, wiring etc complete work.
Erection and grounting of CT structure, mounting and fitting of “CT” on erected structure, earthing, wiring etc complete work.
Carriage of old and Used 11 KV Cable From 33/11 KV Sub Station -Tarkulwa to Store center deoria .
Installation of 33 KV control panel, wiring with complete earthing and respectively installation of battery and battery charger in control room and making connection.
Mounting and fitting of equipment on erected structures.
33 KV line isolator 400 Amp
33 KV Bus – Isolator 400 Amp
Providing following control cable and its laying form switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Painting of Newly erected structure in switchyard.
Work No. 02 Shifting & loading of following materials on private truck at store centre Deoria & carriage up to 33/11 KV Sub-Station Bariyarpur Distt-Deoria & Un-loading of the same with proper stacking (Distance about 0 to 29 km)
11 KV ‘XLPE’ Power cable.
33 KV ‘VCB’ complete with all structure
33 KV. C.T. with structure
33 KV Control panel for Single Transformer
Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection, Rail pieces and T/F shifting to another place by crane.
Providing & Making connection of Battery charger with 24 (12+12 volt) Volt battery ( Exide tubuler battery) with cabinet.(1 Set=2 No. Battery 12 Volt and 01 No. charger)
Dismantling of H.T. jumpers, 11 KV C/J kits & different earthings of existing 5 MVA T/F. Drain out of T/F oil After closing valves and opening of radiators for shifting of existing 5 MVA T/F from plinth by Crane about 30 mtrs distance & resetting of accessories etc. complete work
Providing & Making connection 33 KV PG clamp for jumpering of Busbar connection
Providing & Making connection of Alluminium. Lug 3x300 mm2 for jumpering of 10 MVA T/F and Busbar connection
Dismantling of Bus bar Jumpers, different earthings of existing 5 MVA T/F. etc. complete work
Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
Laying of 11 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
Providing of 33 KV. Top channel for cable stand & neutral earthing
Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 indoor/outdoor.
Dismantling of existing pale fencing and resetting after completion of trnasformer work.
Erection and grouting of “VCB” Structure, mounting and fitting of “VCB” on erected structure, earthing, wiring etc complete work.
Erection and grounting of CT structure, mounting and fitting of “CT” on erected structure, earthing, wiring etc complete work.
Installation of 33 KV control panel, wiring with complete earthing and respectively installation of battery and battery charger in control room and making connection.
Providing following control cable and its laying form switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Painting of Newly erected structure in switchyard.
Work No. 03 Shifting & loading of following materials on private truck at store centre Deoria & carriage up to 33/11 KV Sub-Station Barhaj Tehshil Distt-Deoria & Un-loading of the same with proper stacking (Distance about 0 to 29 km)
11 KV ‘XLPE’ Power cable.
33 KV ‘VCB’ complete with all structure
33 KV. C.T. with structure
33 KV Control panel for Single Transformer
33 KV line isolator 400 Amp
33 KV Bus Isolator 400 Amp.
33 KV Post Insulator with all structure
Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection, Rail pieces and T/F shifting to another place by crane.
Providing & Making connection of Battery charger with 24 (12+12 volt) Volt battery ( Exide tubuler battery) with cabinet.(1 Set=2 No. Battery 12 Volt and 01 No. charger)
Dismantling of H.T. jumpers, 11 KV C/J kits & different earthings of existing 5 MVA T/F. Drain out of T/F oil After closing valves and opening of radiators for shifting of existing 5 MVA T/F from plinth by Crane about 30 mtrs distance & resetting of accessories etc. complete work
Providing & Making connection 33 KV PG clamp for jumpering of Busbar connection
Providing & Making connection of Alluminium. Lug 3x300 mm2 for jumpering of 10 MVA T/F and Busbar connection
Dismantling of Bus bar Jumpers, different earthings of existing 5 MVA T/F. etc. complete work
Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
Laying of 11 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
Providing of 33 KV. Top channel for cable stand & neutral earthing
Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 indoor/outdoor.
Dismantling of existing pale fencing and resetting after completion of trnasformer work.
Erection and grouting of “VCB” Structure, mounting and fitting of “VCB” on erected structure, earthing, wiring etc complete work.
Erection and grounting of CT structure, mounting and fitting of “CT” on erected structure, earthing, wiring etc complete work.
Installation of 33 KV control panel, wiring with complete earthing and respectively installation of battery and battery charger in control room and making connection.
Erection, grouting and earthing of following structure
33 KV Post Insulator Structure
Mounting and fitting of equipment on erected structures.
33 KV line isolator 400 Amp
33 KV Bus – Isolator 400 Amp
33 KV Post Insulator
Providing following control cable and its laying form switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Painting of Newly erected structure in switchyard.
Work No. 04 Shifting & loading of following materials on private truck at store centre Deoria & carriage up to 33/11 KV Sub-Station Gajahadwa Distt-Deoria & Un-loading of the same with proper stacking (Distance about 0 to 29 km)
11 KV ‘XLPE’ Power cable.
33 KV ‘VCB’ complete with all structure
33 KV. C.T. with structure
33 KV Control panel for Single Transformer
33 KV line isolator 400 Amp
33 KV Bus Isolator 400 Amp.
33 KV Post Insulator with all structure
Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection, Rail pieces and T/F shifting to another place by crane.
Providing & Making connection of Battery charger with 24 (12+12 volt) Volt battery ( Exide tubuler battery) with cabinet.(1 Set=2 No. Battery 12 Volt and 01 No. charger)
Dismantling of H.T. jumpers, 11 KV C/J kits & different earthings of existing 5 MVA T/F. Drain out of T/F oil After closing valves and opening of radiators for shifting of existing 5 MVA T/F from plinth by Crane about 30 mtrs distance & resetting of accessories etc. complete work
Providing & Making connection 33 KV PG clamp for jumpering of Busbar connection
Providing & Making connection of Alluminium. Lug 3x300 mm2 for jumpering of 10 MVA T/F and Busbar connection
Dismantling of Bus bar Jumpers, different earthings of existing 5 MVA T/F. etc. complete work
Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
Laying of 11 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
Providing of 33 KV. Top channel for cable stand & neutral earthing
Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 indoor/outdoor.
Dismantling of existing pale fencing and resetting after completion of trnasformer work.
Erection and grouting of “VCB” Structure, mounting and fitting of “VCB” on erected structure, earthing, wiring etc complete work.
Erection and grounting of CT structure, mounting and fitting of “CT” on erected structure, earthing, wiring etc complete work.
Installation of 33 KV control panel, wiring with complete earthing and respectively installation of battery and battery charger in control room and making connection.
Erection, grouting and earthing of following structure
33 KV Post Insulator Structure
Mounting and fitting of equipment on erected structures.
33 KV line isolator 400 Amp
33 KV Bus – Isolator 400 Amp
33 KV Post Insulator
Providing following control cable and its laying form switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Painting of Newly erected structure in switchyard.
Work No. 05 Shifting & loading of following materials on private truck at store centre Deoria & carriage up to 33/11 KV Sub-Station Nathnagar Distt-Deoria & Un-loading of the same with proper stacking.
11 KV ‘XLPE’ Power cable.
33 KV ‘VCB’ complete with all structure
33 KV Control panel for Single Transformer
33 KV Bus Isolator 400 Amp.
33 KV Post Insulator with all structure
Repairing of plinth and height and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection, Rail pieces and T/F shifting to another place by crane. and 1.5 feet increasing height of T/F Plinth over the existing Plinth level
Providing & Making connection of Battery charger with 24 (12+12 volt) Volt battery ( Exide tubuler battery) with cabinet.(1 Set=2 No. Battery 12 Volt and 01 No. charger)
Providing & Making connection 33 KV PG clamp for jumpering of Busbar connection
Dismantling of H.T. jumpers, 11 KV C/J kits & different earthings of existing 5 MVA T/F. Drain out of T/F oil After closing valves and opening of radiators for shifting of existing 5 MVA T/F from plinth by Crane about 30 mtrs distance & resetting of accessories etc. complete work
Digging of pits for taking out of old, used and damaged 11 KV cable & making ring safely.
Providing & Making connection of Alluminium. Lug 3x300 mm2 for jumpering of 10 MVA T/F and Busbar connection
Dismantling of Bus bar Jumpers, different earthings of existing 5 MVA T/F. etc. complete work
Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
Laying of 11 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
Providing of 33 KV. Top channel for cable stand & neutral earthing
Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 indoor/outdoor.
Dismantling of existing pale fencing and resetting after completion of trnasformer work.
Erection and grouting of “VCB” Structure, mounting and fitting of “VCB” on erected structure, earthing, wiring etc complete work.
Erection and grounting of CT structure, mounting and fitting of “CT” on erected structure, earthing, wiring etc complete work.
Carriage of old and Used 11 KV Cable From 33/11 KV Sub Station -Nathnagar to Store center deoria .
Installation of 33 KV control panel, wiring with complete earthing and respectively installation of battery and battery charger in control room and making connection.
Erection, grouting and earthing of following structure
33 KV Post Insulator Structure
Mounting and fitting of equipment on erected structures.
33 KV Bus – Isolator 400 Amp
33 KV Post Insulator
Providing following control cable and its laying form switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Painting of Newly erected structure in switchyard.
Work No. 06 Shifting & loading of following materials on private truck at store centre Deoria & carriage up to 33/11 KV Sub-Station Lar Distt-Deoria & Un-loading of the same with proper stacking (Distance about 0 to 40 km)
11 KV ‘XLPE’ Power cable.
33 KV ‘VCB’ complete with all structure
33 KV. C.T. with structure
33 KV Control panel for Single Transformer
33 KV Bus Isolator 400 Amp.
Repairing of plinth and height and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection, Rail pieces and T/F shifting to another place by crane. and 1.5 feet increasing height of T/F Plinth over the existing Plinth level
Providing & Making connection of Battery charger with 24 (12+12 volt) Volt battery ( Exide tubuler battery) with cabinet.(1 Set=2 No. Battery 12 Volt and 01 No. charger)
Dismantling of H.T. jumpers, 11 KV C/J kits & different earthings of existing 5 MVA T/F. Drain out of T/F oil After closing valves and opening of radiators for shifting of existing 5 MVA T/F from plinth by Crane about 30 mtrs distance & resetting of accessories etc. complete work
Providing & Making connection 33 KV PG clamp for jumpering of Busbar connection
Providing & Making connection of Alluminium. Lug 3x300 mm2 for jumpering of 10 MVA T/F and Busbar connection
Dismantling of Bus bar Jumpers, different earthings of existing 5 MVA T/F. etc. complete work
Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
Laying of 11 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
Providing of 33 KV. Top channel for cable stand & neutral earthing
Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 indoor/outdoor.
Dismantling of existing pale fencing and boundrt wall and resetting after completion of trnasformer work.
Erection and grouting of “VCB” Structure, mounting and fitting of “VCB” on erected structure, earthing, wiring etc complete work.
Erection and grounting of CT structure, mounting and fitting of “CT” on erected structure, earthing, wiring etc complete work.
Installation of 33 KV control panel, wiring with complete earthing and respectively installation of battery and battery charger in control room and making connection.
Mounting and fitting of equipment on erected structures.
33 KV Bus – Isolator 400 Amp
Providing following control cable and its laying form switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Painting of Newly erected structure in switchyard.
Work No. 07 PART - A Following Decentralized Materials Provided by The Contractor)
33 KV ‘V’ Type Cross Arm 100x50x6mm, MS Channel ( 7.9 Kg/m)
X-arm clamp with nut bolt for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make
33 KV. Top channel ( 125x65mmX3200 mm ( 10.7 Kg/m)
Top channel clamp with nut bolt for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make
Stay Rod 20x1800 mm
Stay wire 7/8 SWG
Stay Clamp for ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.
MS Earthing Rod 20x2500 mm
33 KV Polymer Pin Insulator
33 KV Polymer Disc Insulator 70 KN B&S Type
Disc fitting 70 KN B&S Type for DOG
P.G. Clamp for DOG
‘E’ Bracket for 33 KV
Packing piece with Bolt & Nut
M.S. Angle Iron 65x65x6mm bracing
33 KV M.S. bracing Angle clamp with nut bolt ( Top side) for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make
33 KV M.S. bracing Angle clamp with nut bolt ( Bottom side) for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make
GI Wire 5 mm
33 KV Guarding angle
33 KV Guarding angle Clamp with nut bolt for ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.
F-bracket with nut bolt for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make
Number Plate
Danger Board with Clamp
Barbed wire
Bolts, Nuts, & Washers
Alluminium Paint
Red Oxide Paint
Part B Shifting & loading of following materials on private truck at store centre Deoria & carriage up to 33 KV Rudrapur Link line Site Distt-Deoria & Un-loading of the same with proper stacking (Distance about 0 to 19 km)
S.T. Pole – 11 Mtr. Long
ACSR ‘Dog’ Conductor
Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete).
Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete)) .
Erection of Four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete)) .
Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.
Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
Making H.T. Connections of the proposed line, on to the existing 33 KV line from where line is eminating and another at the end of line to the existing 33 KV line making section . The making Section work consists of fixing of tension fitting, insulators, jumpering, clamping and binding etc. at the both site as per site conditions.
R N traders
M/S SHUKLA ENTERPRISES
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .