REPAIR/MAINT TO TILING WORK, FALSE CEILING, ROOFING SHEET ETC AND CERTAIN MISC ITEMS AT 95 FD REGT, FASF, SELECTION CENTRE EAST AND ENGR REGT UNDER AGE BR-I AT NEW CANTT, PRAYAGRAJ

Amount

Dismantling of AC sheet corrugated/semi corrugated sheets in wall cladding or in roof covering complete all as specified and directed.

M&L for Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and directed.

M&L for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

S&F joint free non skid Ceramic colour tiles, 7 to 8mm thick (square/ rectangular) , area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for joint free non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free double charged “coloured” vitrified tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L joint free GVT vitrified coloured tiles of 8 to 10mm thick area of each tile exceeding 0.36 and n.exc 1.0 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 450 mm x 300 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for Granite 16mm to 17mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F for steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F for steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S&F for Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair CP Stop valve/angle valve 15 mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified and directed.

S&F in repair PVC connection 15 mm size with P.T.M.T nuts of length 450mm complete all as specified and directed.

S&F in repairs wall mixture with provn for over head showers with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed

S&F in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including brocket complete all as specified and directed by engineer in charge.

S&F in repair for grating doom 100 mm dia of PTMT.(Minimum weight 25gms) complete all as specified and directed.

S&F in repair bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete all as specified and directed.

S&F in repair health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 65 to 90 mm size, shower Arm with swivel joints complete all as specified and directed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI or PVC Pipe ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.

S&F for PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore complete all as specified and directed.

S&F for PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified and directed.

S&F for PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

S&F for PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.

S&F in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick wall or concrete in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of cement wash complete all as specified and directed.

M&L for preparation of new plastered surfaces applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

M&L for preparing of newly plastered ceiling surface and applying two coats of OBD wash complete all as specified and directed.

M&L for preparing of newly plastered wall surface and applying two coats of white wash complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 4mm thick E-boards tiles (Make: Everest) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F for solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for PCC type E-2 1:5:10 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed

M&L for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation 50mm thick complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching,coping, kerb and like including necessary formwork and weathering ,slightly rounded or chamfered as required and as directed.

M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and complete including dismantling of tiles complete all as specified and directed..

M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles complete all as specified and directed.

S&F for Wall hung western closet complete as per manufacter instruction including all necessary accessories complete all as specified and directed Make :Jaquor Cat part ARS-WHT-39953BIUFSM or equivalent as per make list.

M&L in machine cut polished kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in CM(1:6) complete all as specified and directed.

M&L in Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over 10mm thick screed bed in CM(1:3) complete all as specified and directed.

M&L for chamfers, splays or arris of granite in face work exc. 15mm but n. exc 50 mm wide complete all as specified and as directed.

S&F in repair aluminium composite panel sheet 3mm thick of brand name GURIND / Alstone fixed with screws and ncessary aluminium tube of size 25mmx38mm x1.5mm thick duly filled joints silicon as in ceiling, coloumns or making sign board with fixing Stailness steel letters complete all as specified and directed.

S&F in repair stainless steel letters 450mm height and 32mm depth made out of 1mm thick stainless steel sheet conforming to AISI 304 with seemless welding rubbed, smooth edges , polished fixed with screws and adheshive complete all as specified and directed.

S&F in repair stainless steel letters 225mm height and 32mm depth made out of 1mm thick stainless steel sheet conforming to AISI 304 with seemless welding rubbed, smooth edges , polished fixed with screws and adheshive complete all as specified and directed.

S&F for vitreous china wash and basin thin rim table top basin of size 415x415x145mm owel type with complete fittings complete all as specified and directed.Make :Jaquor Cat part OPS-WHT-15905 or equivalent as per make list.

M&L for wall cladding tiles sizes 300 mm x 600 mm x 7-8 mm thick designer type coloured for wall etc set & jointed in cement and pointed in coloured cement to match the shade of tile and over 15 mm thick rendering in CM(1:4) on brick work or concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.

S&F in repair Wall mixer with provision for overhead shower with 115 mm bend pipe on upper side,connecting legs and wall flanges complete all as specified and directed. Make : Jaquor cat part COP -273PM or equivalent as per make list.

S&F for corner glass self (with bracket) complete all as specified and directed. Make: Jaquor Cat part ACN-CHR-1173 or equivalent as per make list.

S&F for shower arm 20 mm dia and 450 mm long round shape with 90 degree bend for wall mounted shower with flange complete all as specified and directed. Make :Jaquor Cat part SHA-CHR-479L450 or equivalent as per make list.

S&F in repairs for waste coupling 32mm size full thread with (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60ms) complete all as specified and directed.

S&F for vitreous china wash and basin thin rim table top basin of size 415x415x145mm shape round complete all as specified and directed. Make :Jaquor Cat part OPS-WHT-15905 or equivalent as per make list.

S&F for waste coupling 32mm size full thread with 130mm height complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-705L130 or equivalent as per make list.

S&F in repairs for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-769L300X190 or equivalent as per make list.

S&F in repairs for Maze overhead shower 200 mm round shape single flow (body & face plate SS with chrome finish) with rubit cleaning systemcomplete all as specified and directed. Make :Jaquor Cat part OHS-CHR-1613 or equivalent as per make list.

S&F for cistern with frame complete s per manufacter instruction including all necessary accessories all as specified and directed. Make :Jaquor Cat part JCS-WHT-2400FS or equivalent as per make list.

S&F for cistern with plate complete s per manufacter instruction including all necessary accessoriesall as specified and directed. Make :Jaquor Cat part JCP-CHR-352415 or equivalent as per make list.

S&F for concealed body for 3-inlet single lever diverter with button assembly ,cartridge sleeve but w/o exposed parts complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-193 or equivalent as per make list.

S&F for single lever exposed parts kit of HI-FLOW diverter consisting of operating lever cartridge sleeve wall flange (with seals)button assembly sleeve & button (compatible with ALD-079N) complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15079NKPM or equivalent as per make list.

S&F for Pillar taps, swan neck fancy type cast copper alloy, with capstan heads, chromium plated,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and irected. Make :Jaquor Cat part OPP-CHR-15005BPM or equivalent as per make list.

S&F for angular stop cock with wall flange complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15053PM or equivalent as per make list.

S&F for frameless swivel mirror complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1195N or equivalent as per make list.

S&F for towel ring complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1195N or equivalent as per make list.

S&F for two way bib cock with wall flange complete all as specified and directed. Make : Jaquor cat part KUP-CHR-35041PM or equivalent as per make list.

S&F for hand shower (health faucet) with 8mm dia 1.2 m long flexible tube and wall hook complete all as specified and directed. Make : Jaquor cat part ALD-CHR-573 or equivalent as per make list.

S & F for toilet paper holder with flap complete all as specified and directed.Make : Jaquor cat part AQN-CHR-7753

Dismantaling of old existing aluminium Doors /windows/wall partations of any type and in any size complete all as specified and directed.

S&F fabricating anodized aluminium frame work,door shutter ,windows , partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F for powder coated aluminium anodised grills of bar size 6mm x 5 mm with square gap of size 75mm fixed with suitable aluminium channel of size 12-15 mm section complete all as specified and directed .

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair 75 mm size 4 levers aluminium mortice lock, vertical type complete all as specified and directed.

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair 4.8mm thick sheet glass, ordinary quality and glazing with rubber bidding in square exc 0.5 sq. m in each pane complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description exc 1.0 sqm but not exc 2.0 Sqm each and removing from site complete all as specified and directed.

S&F MS framed work as in doors frame,doors or gates of angle iron,door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc. to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for 30 mm thick flush shutters with block board core & plywood face panels commercial type on both face complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treated complete all as specified and directed.

S&F for Providing and fixing factory made upvc white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor including cost of 5.5 mm thick glass and staineless steel wiremess includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm eachcomplete as per manufacturer's specification and direction of Engineer - In- Charge.

S&F for factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F for factory made single extruded WPC (wood polymer composite)solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tocxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N (edge),mim compressive strength of 50 N/mm2,modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of being termite/boer proof,water/moisture proof and fire retardent. WPC to be laminated with PVC foil of min 14 microns thick of approved design pasted with hot melted adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size necessary full body threadeded star headed counter sunk SS screws,all asper directio of engineer in charge complete all as specified and directed.

Dismantaling of old unserviceable hinge / tower bolt / handle / sliding bolt and other doors or window fittings as required for replacement complete all as specified and directed.

S&F for 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F for 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F for 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

S&F for 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed.

S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified and directed.

S&F for 12 mm thick toughened glass door with suitable locking arrangement with lock (Godrej/link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring (Make Sandhoo/Samrat) with two Nos decorative type aluminium handle of 200 mm dia complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 78545.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

M/S CHANDRIKA PRASAD AND SONS (BID ID -3357451)

M/S APOORVA CONSTRUCTION (BID ID -3359492)

Anupravesh Enterprises (BID ID -3359391)