CERTAIN BR REPAIRS IN EM INSTALLATION AND EXTERNAL PAINTING TO OHTs AT BAIRAGARH UNDER GE BHOPAL

Amount

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars complete all as specified and directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.

S&F factory made Flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, both face covered with decorative face veneers with lipping/frame to match complete all as specified and directed.

M&L for factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. Note : size of member of shutters as specified in SSR Part I - 2009 section 8 clause 8.24 (a)

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.180 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified.

M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F Aluminium handles, cast type anodised, 150 mm size complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

Dismantling posts or struts embeded in concrete, brickwork (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismentling fencing wire mesh any type, any size complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/dense soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

M&L for cement concrete 1:2:4 Type B2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S&F mild steel angle iron as in posts and struts in fencing including cutting top to shape as directed drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc conforming to Fe 290 Gde E-165 complete all as specified and directed.

&F Mild steel conforming to Fe-290 Gde E-165 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; handmade sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and directed.

S&F mild steel round bars conforming to Gde 1 (IS: 432 part-I) 10mm dia and over as in stiffeners in chain link fencings etc complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 Cm long and dia of shank 11 to 15mm complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed fixed in repairs complete.

Supply only chain link MS galvanised of 50 mm x 50 mm size mesh and dia as directed by Engr in charge complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L framed work such as grills, gratings, gate including welding etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendereing brick or concrete surface in CM 1:6 finishing the surface fair & even without using extra cement complete all as specified and directed.

M&L for rendering 20mm thick on faces of brick or concrete surfaces (External surfaces) shall be done in two coats comprising cement and sand mortar (1:4) 5mm thick mixed with water proofing compound @ 3% by wt of cement over a backing coat of cement and sand mortar(1:4) 15mm thick and finished with trowel to an even and smooth surface without using any extra cement complete all as specified and directed. Note :- Water Proofing compound shall be measured and paid seperately

M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral water profing compound complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry , built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stonework and precast articles complete all as specified and as directed.

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior weather proof water base emulsion paint on wall all as specified and directed. [MAKE : ASIAN (ACE) /SHALIMAR (SAKTIMAN) /BURGER (WALL MASTA)]

M&L for preparing newly plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of primer on plastered surfaces, complete all as specified and directed.

M&L for preparing newly plastered or unplastered surfaces of wall and applying three coats of white wash over a coat of primer on plastered surfaces, complete all as specified and directed.

Preparation of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and M&L for applying one coat of exterior weather proof water base emulsion paint on wall all as specified and directed. [MAKE : ASIAN (ACE) /SHALIMAR (SAKTIMAN) /BURGER (WALL MASTA)]

Preparation of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and M&L for applying two coats of exterior weather proof water base emulsion paint on wall all as specified and directed. [MAKE : ASIAN (ACE) /SHALIMAR (SAKTIMAN) /BURGER (WALL MASTA)]

Complete removal of existing treatment on surfaces of RCC Over Head tank for height up to 21.0 M (any number of layers) by scrapping including filling holes, cracks, depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of exterior water base emulsion paint on white or tinted complete all as specified and directed. [Make:- Apex Ultima Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- (a) The rate quoted are inclusive of neccessary scafolding expenses upto 21.00 M height OHT (04 Nos) (b) The rate quoted are inclusive of removal of honey bee hives from OHT at any height. .(c) The work of applying exterior emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (d) A Guarantee of 5 yrs from the certified date of completion for the effectiveness of exterior acrylic emulsion weather coat paint shall be submitted by the manufacturer and contractor. (e) A Security deposit @2.5% of the amount of treatment shall be deposited by the contractor for the entire guarantee period i.e. 5 yrs in the form of FDR in favour of GE. (f) During the guarantee period if exterior acrylic emulsion weather coat paint gets removed or becomes layered contractor shall rectify or replace (at his option) defective materials at his own expenses, when called upon in writing to do so by the GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work.

M&L for broken stone or boulder of gauge 40 to 80mm as in loose filling, levelling with in electrical instalation incl removal of vegetation complete all as specified and directed.

Demolition of cement concrete in floors and pavings not exc. 15 cm thickness (below/above ground level) complete all as specified and directed

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified and directed.

M&L for Factory made, machine pressed, M-40 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 80 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES]

M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ORIENT/JOHNSON]

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per Item No. 47.00 above but 6 to 8 mm dia.

M&L for Reinforced Cement Concrete design mix M-25 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

S&F 1.25mm thick Steel Rolling Shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull or manual type, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof covering complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL]

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL]

S&F Pre-painted galvalume aluminum zinc coating GI based profile steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL]

Deduct Schedule of credit (calculation will be done off line) Rs. 34091.00

PADAMSHRI CONSTRUCTION CO

R K Sales

M/s VIKAS TRADERS