SPECIAL REPAIR TO BLDG. NO. 113, 114. 119, 120 AND 121(05 X OR MD ACCN) AT 13 PUNJAB AND PROVN OF OVER SHED FOR PARKING AT ARTY CENTER UNDER GE GOLCONDA

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground floor) complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete ( un reinforced), etc complete all as specified and as directed.

M&L 75mm thick plain cement concrete 1 : 3 : 6 mix type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternative bays and finished even and smooth with out using extra cement including necessary form work, complete all as specified and as directed.

M & L 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) in sub bases, floors and pavings etc, complete all as specified and as directed.

M&L Polished shahabad stone slabs on skirting/dado of thickness 20-25 mm set & jointed in meat cement slurry and pointed in white or coloured cement to match the shade over 10 mm thick backing coat in CM 1:3, including grinding and polishing makin

Demolition of cement concrete of any description in any position (Reinforced), complete all as specified and as directed.

M&L for Reinforced cement concteteType B1, 1:2:4 using (20 mm graded stone aggregate) in slabs supported on walls, beams, landings, balconies, canopies, deck slabs and, shelves and similar works etc, complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inlcuding cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work as flat finishing to rough finished surface of concrete complete all as specified and directed.

M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm, but n exc. 0.11 sqm, in floor etc. set and jointed in net cement slurry & pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L non skid coloured ceramic floor tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n'exc 0.18 sqm , set and jointed in neat cement slurry and pointed with white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6, complete all as specified and as directed.

M&L glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and and jointed in cement slurry and pointed with white or coloured cement to match incl. Rendering 10mm thick backing coat in CM 1:4 on fair faces of brick work or concrete surface, complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar, complete all as specified and as directed.

M&L for brickwork with sub class B Bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position in unframed work.

S&F rolled mild steel sections as in roof trusses, (framed), trussed purlins, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats confirming to Fe-410-W (grade E-250 quality 'A') complete all as specified and as directed.

M & L preparation of new steel surfaces description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for PCC work as in (1:3:6) type C-2 using 40mm graded stone aggregate in foundation filling & mass concrete for Post/Pillars etc all as specified and directed.

Excavation in post holes (or simlar holes) each n.exc 0.5 cum, in hard/dense soil, getting out and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls/ceiling including raking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and as directed.

g smooth surface of floor complete all as specified and directed.

M&L 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

M&L 5 mm thick plastering in CM 1:3 finished even and smooth w/o using extra cement on concrete surface of ceilings, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5 mm thick Birla wall care putty on plastered surrfaces complete all as specified and as directed.

M&L for complete removel of existing surface of old plastered surfaces of walls and applying two coat of oil bound distemper over a coat of 1.5mm thick wall care putty including primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and as

directed.

M & L for three coat of white wash on new surface of ceiling including preparation of new surfaces, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each and removing to or from site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each and removing from site ,complete all as specified and as directed.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints complete all as specified and as directed.

S&F Window guard bars, plain, let in wodden frames, L or T section section suppores for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165, complete all as specified and as directed.

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutter of divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventila-tors, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as specified and as directed.

S&F MS Butt hinges medium weight cold rolled of size 75mm complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises.complete all as specified and as directed.

S & F 100 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F mild steel wire type I, gate & shutter, hooks & eyes 150 mm size, complete all as specified and as directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed.

M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and as directed.

M&L 2nd class hard wood plain framed panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc. complete all as specified and as directed.

S&F MS Butt hinges medium weight cold rolled of size 100mm complete all as complete all as specified and as directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete.

S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as specified and as directed.

S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and as directed.

S & F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.

S & F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed,complete all as specified and as directed.

M&L preparation of new surfaces of wood or wood based material description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing all as specified and directed

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc, complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 with WPC on fair faces of brick walls finished the surface even and smooth without using extra cement complete all as specified and directed. Note: WPC will be measured and paid separately.

S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21, complete all as specified and as directed.

S & F 100 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified and as directed.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S&F in repair fancy powder coated brackets for 25 mm dia drapery curtain rods complete all as specified and as directed.

S & F in repair 15mm dia GI tubing medium grade and its connection laid in trenches, floor, wall and ceiling etc including removal of existing GI pipe all as specified and directed

S & F in repair 20mm dia GI tubing medium grade and its connection laid in trenches, floor, wall and ceiling etc including removal of existing GI pipe all as specified and directed

M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and as directed.

S&F in repair of 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified and as directed.

Supply and fixed in repair 15 mm bore Bib taps cost copper alloy Chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

Dismantling PVC water tanks of capacity 500 ltr and removing to store complete all as specified and as directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) double layer of 500ltr capacity hoisted and fixed in position complete all as specified and as directed. .

All as per Sl item No.65 but concealled stop cock.

S & F in repair 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F 15 mm dia Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank and complete all as specified and as directed.

S&F in repair PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends complete all as specified and as directed.

S & F in repair Vitreous China wash basin, white, flat back, size 630x450mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe fixed complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe,complete all as specified and as directed.

S & F in repair 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end complete all as specified and as directed.

S & F 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe, screwed for iron pipe and fixed in repairs complete all as specified and as directed.

S & F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors as waste pipe etc. Bore of pipes in 32mm, etc complete all as specified and as directed.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe.complete all as specified and as directed.

S & F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe)complete all as specified and as directed.

Supply & Fix stainless steel kitchen plate rack ( non magnetic type ) made of 0.65 mm thickness sheet of size 24'' x 30'' x 10'' complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms), complete all as specified and as directed.

Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required, complete all as specified and as directed.

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 110 mm, etc complete all as specifed and directed.

Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required, complete all as specified and as directed.

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 75 mm, etc complete all as specifed and directed.

S&F in repair sinks (non megnetik) with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including waste coupling bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings complete all as specified and directed.

S&F15 including mm dia Brass chromium plated shower rose 125 mm size fixed complete all as specified and as directed.

S & F in repair 110 mm bore PVC( SWR ) junction single ,(singleT) equal or unequal complete all as specified and as directed.

S & F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed.

All as per item No. 85 above but fixed to walls. (At any height of building, till 4 floors also).

M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet in 75 mm, etc complete all as specifed and directed.

S & F in repair 75 mm bore PVC( SWR ) junction single ,(singleT) equal or unequal, complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth using extra cement with WPC complete all as specifed and directed. (NOTE : Supply of WPC will be paid under the respective Item)

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using WPC @ 3% by weight of cement complete incl taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbinbg down with water to receive new treatment all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item)

S&F PVC (SWR) bends (size of bore 75mm) complete all as specified and as directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A,etc complete all as spfd and directed.

S&F in repair salt glazed stone ware gully traps square or rounded mouthed tape & fix 150 x 150 mm fixed in cement concrete complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium grade”, including fittings 25 mm (1.0”) dia complete all as specified and as directed.

M&L Mirror Polished shahabad stone flooring with slab of thickness 20-25 mm,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 20mm thick screed bed in CM 1:6 including grinding and polishing making smooth surface of floor complete all as specified and as directed.

M&L for Brickwork with sub class ‘B’ bricks, old size one brick straight or curved on plan exc 6m mean radius, built in CM 1: 6 complete all as specified and as directed.

S & F for Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet in 1.60 mm, etc complete all as specified and as directed.

M&L for plain cement concteteType B1, 1:2:4 using (20 mm graded stone aggregate) in foundation fillings, mass concrete ans similar works and for MS pipe fixing complete all as specified and as directed.

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for prepartion of new or previously untreated surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M & L for providing point wiring with 3 runs of 1.5 sq. mm single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable, 1100 vols grade in and including non metallic rigid PVC conduit medium grade with appropriate size with all fittings concealed in wall including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators etc. complete for :- One light controlled by one switch.

All as per sl item No. 106 above but for one bell controlled by one switch.

All as per sl item No. 106 above but for one ceiling fan controlled by one switch & regulator.

All as per sl item No. 106 above but for one exhaust fan controlled by one switch.

All as per sl item No. 106 above but for one 3 pin socket 6 Amp on independent board.

Supply and fix Modular switch, single pole, one way, 6 Amps one module complete.

Supply and fix Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and directed.

Supply and fix Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.

Supply and fix Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.

Supply and fix Ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body 65x50 mm, terminals 240 volts complete, all as specified and directed.

Supply and fix lamp holder insulated body with back plate complete all as specified and directed.

Supply and fix modular stepped type electronic fan regulator 220 volts, 100Watt complete all as specified and as directed.

Supply and fix modular bell push 6 Amps 1 module complete all as specified and as directed.

Supply and fix Bell electronic 230 volt, AC single pole complete all as specified and directed.

S & F 9W LED Bulb of base B22d with color temp 6500k all as specifed and directed.

S&F in repair LED light fittings, 1x10 watts bulk head luminaires, IP66 complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED BLDG Security Light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete Make: Havells,Cromption, Jaguar or Equivelent

Supply and fix Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) TPN 440 V, for 4 ways, complete all as specified and directed.

Supply and fix Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 12 ways, complete all as specified and directed.

Supply and fix MCB SP 06 to 32 Amp, 240 volts complete all as specified and directed.

Supply and fix MCB SPN 40 to 63 Amp, 240 volts 50Hz AC supply, complete all specified and directed.

Earthing for MD Accn machinery/equipment using 4 mm GI wire as earthing lead and MS galvanized plate of size 60 cm x 60 cm x 6 mm, as earth electrode complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed at site.

Supplying and fixing 1100 volts grade heavy duty standard cable size 10 sqmm PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades,shelves, lintels,etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10 cm grith complete all as specified and directed.

Supply and fix 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron and fixed work all as directed.

Per Point

Cutting/Boring on the existing CI/GI pipe line50/25mm dia (in position) for insertion of new galvanised Tee 50 x 25 mm for branch connection incl necessary jointing material complete all as specified and as directed.