COMPREHENSIVE MAINTENANCE OF INCINERATOR PASSENGER LIFT MECHANICAL LAUNDRY UPS FORCED VENTILATION AND CERTAIN MISCELLANEOUS WORKS AT HQGNA INS GMK INHS JEEVANTI UNDER GE GOMANTAK

Amount

Comprehensive maintenance of electrically operated 4/6 passenger lift installed at VKD,Gomantak in reliable safe and efficient operating condition by regularly examining including attending lift in case of emergency , lubricating and adjusting the equipments and carry out planned maintenance in systematic and controlled manner suitable for serving G+3 with electric power operated doors,ARD complete by Skilled Lift Mechanic complete all as specified and directed by Engr-in-Charge. Note: (i) The above maintenance will include complete maintenance of existing lift by regularly and systematically examining adjusting fabricating as required for smooth and functioning of the equipment/lift. The cost of all Minor spares Such as nuts bolts,cleaning accessories ,lubricant,oil etc shall be deemed to be included in the rates quoted by the contractor. (ii) Contractor will prominently display his contact/mobile number inside and outside the lift on each lift for call in emergency. (iii) Major worn out/ defective part will be measured and paid seperately under respective item of schedule.

Supply, fixing & testing of 15 Relay card suitable for 4/6 passengers capacity lift installed at VKD,Gomantak including taking out old unserviceable one complete all as specified and as directed.

Supply, fixing & testing of Safety card 110 V card suitable for 4/6 passengers capacity lift (G+3) installed at VKD,Gomantak including taking out old unserviceable one complete all as specified and as directed.

Supply, fixing & testing of SMPS -12V/3A (ADPSMEL81) suitable for 4/6 passengers capacity lift (G+3) installed at VKD,Gomantak including taking out old unserviceable one complete all as specified and as directed.

Supply, fixing & testing of SPP (digtal Voltage protection)suitable for 4/6 passengers capacity lift (G+3) installed at VKD,Gomantak including taking out old unserviceable one complete all as specified and as directed.

Supply, fixing & testing of Diode Bridge Card suitable for 4/6 passengers capacity lift (G+3) installed at VKD,Gomantak including taking out old unserviceable one complete all as specified and as directed.

Supply, fixing & testing of Contactor 110 V (ADP18FEL017-18) suitable for 4/6 passengers capacity lift (G+3) installed at VKD,Gomantak including taking out old unserviceable one complete all as directed.

Supply, fixing & testing 2 relay Card suitable for 4/6 passengers capacity lift (G+3) installed at VKD,Gomantak including taking out old unserviceable one complete all as specified and as directed.

Supply, fixing & testing Transformer 300 VA (ADPTRFEL32) suitable for 4/6 passengers capacity lift (G+3) installed at VKD,Gomantak including taking out old unserviceable one complete all as specified and as directed.

Supply, fixing, testing of Landing Operating Panel (LOP) assembly along with all connected accessories suitable for 4/6 passenger capacity lift (G+3) installed at VKD,Gomantak including taking down old unserviceable one complete all as specified and as directed.

Supply, fixing, testing of Car inside button suitable for 4/6 passenger capacity lift (G+3) installed at VKD,Gomantak including taking down old unserviceable one complete all as specified and directed.

Supply, fixing, testing of Break coil suitable for 4/6 passenger capacity lift (G+3) installed at VKD,Gomantak including taking down old unserviceable one complete all as specified and directed.

S & F Electronic Voltage stablizer Single phase ,working range 90 VAC-290 VAC,Cap 1.3 Amp complete all as specified and as directed.

S & F UPS of Capacity 650 VA, Input voltage 140V-300V AC,Freq 50Hz(±10%) Output voltage 230V AC Freq 50 (±1Hz),12V/7AH battery -01 No complete all as specified and as directed.

S & F recess mounted LED cabin lights 6W (round) cutout size as per site requirement complete all as specified and as directed.

Comprehensive maintenance of electrically operated passenger cum bed lift with a carrying cap of 15 passenger to serve (G+1) lift installed at Jeevanti Hospital ,Gomantak in reliable safe and efficient operating condition by regularly examining including attending lift in case of emergency , lubricating and adjusting the equipments and carry out planned maintenance in systematic and controlled manner with electric power operated doors,ARD complete by Skilled Lift Mechanic all as specified and directed by Engr-in-Charge. Note: (i) The above maintenance will include complete maintenance of existing lift by regularly and systematically examining adjusting fabricating as required for smooth and functioning of the equipment/lift. The cost of all Minor spares Such as nuts bolts,cleaning accessories ,lubricant,oil etc shall be deemed to be included in the rates quoted by the contractor. (ii) Contractor will prominently display his contact/mobile number inside and outside the lift on each lift for call in emergency. (iii) Major worn out/ defective part will be measured and paid seperately under respective item of schedule.

Supply, fixing DC rectifier bridge card suitable for passenger cum bed lift with a carrying cap of 15 passenger to serve (G+1) lift installed at Jeevanti Hospital ,Gomantak including taking down old unserviceable one complete all as specified and directed

Supply, fixing 4 relay card suitable for passenger cum bed lift with a carrying cap of 15 passenger to serve (G+1) lift installed at Jeevanti Hospital ,Gomantak including taking down old unserviceable one complete all as specified and directed

Supply, fixing single phase preventor suitable for passenger cum bed lift with a carrying cap of 15 passenger to serve (G+1) lift installed at Jeevanti Hospital ,Gomantak including taking down old unserviceable one complete all as specified and directed

Supply, fixing 12 SMPS card suitable for passenger cum bed lift with a carrying cap of 15 passenger to serve (G+1) lift installed at Jeevanti Hospital ,Gomantak including taking down old unserviceable one complete all as specified and directed .

Supply, fixing 12 V relay + base suitable for passenger cum bed lift with a carrying cap of 15 passenger to serve (G+1) lift installed at Jeevanti Hospital ,Gomantak including taking down old unserviceable one complete all as specified and directed

Supply, fixing LOP walk mounting suitable for passenger cum bed lift with a carrying cap of 15 passenger to serve (G+1) lift installed at Jeevanti Hospital ,Gomantak including taking down old unserviceable one complete all as specified and directed

S & F recess mounted LED cabin lights 8W (round) cutout size as per site requirement complete all as specified and as directed.

M&L for complete servicing of Solar Water Heater thermosyphonic type of capacity 1000 ltrs(2x500 ltrs) including cleaning of main tank, Solar power module/ Solar Panel Reflectors including checking & repairing leakage of inlet/ outlet pipes of Solar Water Heater complete installed at INHS Jeevanti complete all as specified and as directed.

Supply and fixing heating element 3 KW for the purpose of backup heater suitable for existing solar water heating system complete all as specified and directed .

Supply and fixing only thermostat for heating element 3 KW for the purpose of backup heater suitable for existing solar water heating system complete all as all as specified and directed .

M&L for complete servicing of Solar Water Heater thermosyphonic type of capacity 100 LPD including cleaning of main tank, Solar power module/ Solar Panel Reflectors including checking & repairing leakage of inlet/ outlet pipes of Solar Water Heater complete installed at MNS Block,Gomantak complete all as specified and as directed.

M & L for cleaning of SS hood of forced ventilation (chimney inside) system 22 Guage of size 14 x 4 feet by hot water, detergent and SS polish at ships galley , DSC galley & 2 W det Ship Galley complete as directed by Engineer in Charge. Note :-(i) Replaceable condition spare parts will be measured and paid for seaptrately under respective item of sch.(ii) Minor spare parts like replacing of worn out nut bolts washers etc deemed to be included in the rate quoted of the item.

M & L for servicing and cleaning of fresh air ducting including fresh air outlet grills of forced ventilation system of size 1.5 x 1.5 ft after dismantling nuts and bolts by using hot water, detergent and SS polish and refixing the same in original position with new nuts/bolts and washers at ships galley , DSC galley & 2 W det Ship Gallley complete as specified and directed by Engineer in Charge. Note :- (i) Replaceable condition spare parts will be measured and paid for seaptrately under respective item of sch. (ii) Minor spare parts like replacing of worn out nut bolts washers etc deemed to be included in the rate quoted of the item.

M & L for servicing and cleaning of exhaust ducting of forced ventilation system after dismantling nuts and bolts by using hot water, detergent and SS polish and refixing the same in original position with new nuts/bolts and washers at ships galley ,DSC galley & 2 W det Ship Galley complete as specified and directed by Engineer in Charge. (i) Replaceable condition spare parts will be measured and paid for seaptrately under respective item of sch. (ii) Minor spare parts like replacing of worn out nut bolts washers etc deemed to be included in the rate quoted of the item.

Supply only Aluminium fresh Grills of size 300x150mm complete all as per existing at DSC ,Gomantak Galley.

Supply only fresh air filter of size 550x550mm complete all as per existing at DSC ,GNA Officers Mess Gomantak & 2 W det Galley.complete all as specified and as directed.

Supply only Aluminium fresh Grills of size 400x150mm complete all as per existing at GNA Officers Mess ,Gomantak Galley.complete all as specified and as directed.

Supply only Aluminium fresh Grills of size 300x200mm complete all as per existing at 2W Det Galley.complete all as specified and as directed.

Taking down & disconnecting electrical connections for cleaning of exhaust 3 HP centrifugal blower 1440 RPM with cleaning soulution /warm water and detergent/Presuure air including blower balancing and painting with synthetic enarnel paint of existing colour by spraying, including filling cavities with filler, one coat after cleaning dust at ships galley (02 Nos) ,DSC galley (01 Nos) & 2 W det Ship Gallley (01 No) complete all as specified and as directed.

M &L for cleaning of fresh air blower fan and painting with synthetic enamel paint of existing colour by spraying, including filling cavities with filler including replacement of micro filter of 20/90 microns (as per existing filter) of existing make and model at ships galley ,DSC galley & 2 W det Ship Gallley complete all as specified and as directed.

M & L for cleaning of Stainless steel exhaust hood plastic coated made by 1mm thichness (inland type ) size 13x 5.5x2ft- 01 nos by hot water, detergent and SS polish at GNA (O) Mess complete all as specified and as directed.

M & L for cleaning of Stainless steel exhaust hood plastic coated made by 1mm thichness (inland type ) size 10x5.5x2 ft-01 nos by hot water, detergent and SS polish at GNA (O) Mess complete all as specified and as directed.

M & L for servicing and cleaning of fresh air ducting including fresh air outlet grills of forced ventilation system of size 380 sqft after dismantling nuts and bolts by using hot water, detergent and SS polish and refixing the same in original position with new nuts/bolts and washers at GNA (O) Mess complete all as specified and as directed.

M & L for servicing and cleaning of stainless steel ducting made of 22 swg SS angle frame with SS bolts and nut 25 X 3 mm thickness (To exhaust system ) - 630 sq ft after dismantling nuts and bolts by using hot water, detergent and SS polish and refixing the same in original position with new nuts/bolts and washers at GNA (O) Mess complete all as specified and as directed.

Cleaning of (a) 2 HP centrifugal blower made by stainless steel with motor 1440 RPM 3 phase (To exhaust system) - 01 nos (b) 2 HP centrigugal blower made by stainless steel with Kriloskar or LHP make motor 1440 RPM 3 phase (To fresh air system) - 01 nos (c) 7.5 HP centrigugal blower made by stainless steel with motor 1440 RPM 3 phase (To exhaust system) - 01 nos with warm water and detergent including blower balancing and painting with painting with synthetic enarnel paint of existing colour by spraying, including filling cavities with filler, one coat after cleaning dust at GNA (O) Mess complete all as specified and as directed.

M &L for cleaning of fresh air blower fan and painting with synthetic enamel paint of existing colour by spraying, including filling cavities complete at GNA (O) Mess complete all as specified and as directed.

Supply and fix DOL starter with single phase protection feature suitable for 10 HP 415 V, 50 Hz, 3 phase,complete all as specified and as directed.

S & F Direct on line Starters 415V ,7.5 HP ,relay range 13-22 Amps 50 Hz ,3 phase complete all as specified and as directed.

S & F Direct on line Starters 415V , HP ,relay range 9-15 Amps 50 Hz,3 phase complete all as specified and as directed.

Supply & fixing 3 pole power contactors suitable for different equipments.complete all as specified and as directed.

Supply & fix contactor relays suitable for different equipments.complete all as specified and as directed.

Maintenance ,Servicing and attending complaints in case of emergency or breakdown, rectification of fault of Mechanical laundry consisiting of Front loding washing machine 35KG Capacity electrically operated Basket size 950x 500mm 1HP wash motor with 36RPM drain water inlet 25mm and drain outlet 75mm heating coil 12KW door opening size 500mm and overall dimention 1120x 1440x 1730mm, Hydro Extractor Capacity 15KG 3HP drive motor Basket size 550x 300mm Extract speed 1000RPM Drain 65mm and overall dimention 800x1050x1110mm, Drying Thumbler 30KG capacity Basket size 950x 950mm 1HP drive motor 1 HP blower motor electrical heating coil 18/24KW overall dimention 1060x 1570x 1980mm, Flat bed press head and buck size 1500x 750mm 1HP suction blower and 18KW electrical heating coil overall dimention 1600x 1570x 1280mm, Air Compressor of 2HPand all other connected work services, installed at INHS Jeevanti. Note: Major worn out/ defective part will be measured and paid seperately as supply only under respective item of sch. complete all as specified and as directed.

Supply only power supply (part No SDT-30-006 ) for dryer Model No SDT/30/E .complete all as specified and as directed.

Supply only single phase preventor (part No SDT-30-007 ) for dryer Model No SDT/30/E .complete all as specified and as directed.

Supply only MCB switch (part No SDT-30-008 ) for dryer Model No SDT/30/E .complete all as specified and as directed.

Supply only heater (part No SDT-30-009 ) for dryer Model No SDT/30/E .complete all as specified and as directed.

Supply only drive belts (part No SDT-30-011 ) for dryer Model No SDT/30/E .complete all as specified and as directed.

Supply only idler belts (part No SDT-30-012 ) for dryer Model No SDT/30/E .complete all as specified and as directed.

Supply only main bearing (part No SDT-30-013 ) for dryer Model No SDT/30/E .complete all as specified and as directed.

Supply only bearing block (part No SDT-30-014 ) for dryer Model No SDT/30/E complete all as specified and as directed.

Supply only bearing sleeve (part No SDT-30-015 ) for dryer Model No SDT/30/E complete all as specified and as directed.

Supply only idler bearing (part No SDT-30-016 ) for dryer Model No SDT/30/E complete all as specified and as directed.

Supply only idler block (part No SDT-30-017 ) for dryer Model No SDT/30/E complete all as specified and as directed.

Supply only idler sleeve (part No SDT-30-018 ) for dryer Model No SDT/30/E complete all as specified and as directed.

Supply only door gasket (part No SDT-30-020 ) for dryer Model No SDT/30/E complete all as specified and as directed.

Supply only limit switch (part No SFL-30-002) for Washer Model No SFL/35/E complete all as specified and as directed.

Supply only Emergency switch (part No SFL-30-003) for Washer Model No SFL/35/E complete all as specified and as directed.

Supply only contactor (part No SFL-30-004) for Washer Model No SFL/35/E complete all as specified and as directed.

Supply only contactor healthy (part No SFL-30-005) for Washer Model No SFL/35/E complete all as specified and as directed.

Supply only drive belts (part No SFL-30-007) for Washer Model No SFL/35/E complete all as specified and as directed.

Supply only idler belts (part No SFL-30-008) for Washer Model No SFL/35/E complete all as specified and as directed.

Supply only main bearing (part No SFL-30-009) for Washer Model No SFL/35/E complete all as specified and as directed.

Supply only sleeve (part No SFL-30-010) for Washer Model No SFL/35/E complete all as specified and as directed.

Supply only heater (part No SFL-30-011) for Washer Model No SFL/35/E complete all as specified and as directed.

Comprehensive Maint including monthly, quarterly maintainance and attending complaint in case of emergency or breakdown, Rectification of minor fault of Oil fired Incinerator of burning capacity 10kg/hr with all its accesories ( Primary and Secondary Burner of 0.5 HP SP fully automatic mono block type, pressure jet with sequential controller, flame monitor, solenoid valves built in blower and motor fuel pump, voltage ignition transformer, ID FAn centrifugal type 3Phase 5 HP, Forced draft fan centrifugal type SP, 1HP, Recirculation pump 2 in Nos of 0.5 &0.4 HP, complete electical controll panel installed at INHS Jeevanti complete all as specified & directed by Engr-in charge. Note: Major worn out/ defective part will be provided and paid seperatly complete all as specified and as directed.

M&L for painting of complete oil fired incinerator installation comprising of Primary and secondary chamber , emergency vent, Ventury scrubber, Recirculation tank, chimney (stack) complete unit shall be painted externally with two coats of heat resistant silver coloured aluminium paint over a coat of primer. however, electrical panel and the fuel oil tank shall be painted with two coats of synthetic enamel paint ove a coat of primer. Note:- Contractor should visit the site before quoting the rate.

Material and labour for re-winding of electrical motor of Ventilation system/Mechanical laundary with super enameled copper winding wire of required gauge by providing necessary insulating material, baking, varnishing etc complete all as manufacturing instruction and as directed by engineer-In-Charge. Note:- Rate quoted by contractor shall be included dismantling removing transporting re-fixing testing and commissioning all as directed by Engr-in-charge

Supply and fix ball bearing suitable for up to 7.5HP capacity motors/pumps after removal of old unserviceable bearing and making proper alignment and testing all as specified and directed by Engr-in-Charge

Comprehensive maintenance,including monthly for Inspecting, thoroughly check, detection of fault, repairing the minor fault and replacement of defective spare part if any including cleaning of dust from smoke detector and checking of contunuity by the skilled technician/ service Engr to Fire Alarm system with 10 Fire zone and testing on completion of said job upto the full sasisfication of Engr-in charge. Note : Spare/ part for replacement will be paid and measured seperatly.

Supply & Fixing only smoke detector suitable for 230V complete all as specified and as directed.

Supply & Fixing Pro detection panel for any zone out of fire zone of fire alarm systemcomplete all as specified and as directed.

Supply & Fixing only fire/flame detector (Repeater) suitable for 230V complete all as specified and as directed.

M & L for carrying comprehensive maintenance and technical services for 10 KVA UPS installed at Jeevanti Hospital ,Gomantak complete all as specified and as directed. (a) The service technician shall visit the UPS installation site for periodic preventive maintenance , chechup of the UPS system and the batteries every month.During this the system shall be cleaned and general performance will be checked. (b) DC backup source will be maintained properly by applying white petrolium jelly, checking/servicing of batteries etc as applicable. (c) Apart from the periodic preventive maintenance visits all break down calls on system arised during the contract period shall be attended quickly to keep the UPS system in operational condition.

(d) Cost of all the minor spares required to put the UPS in working condition shall be borne by the contractor during the contract period and the rates for the same is deemed to be included in the rates quoted by the Contractor. (e) Response time during normal working hours shall be 4 hrs from the time of receipt of complaint and the resolution time shall be maximum 48 hrs based on the nature of complaint and replacement of components and parts etc. (f) Major Parts required for repair / replacement shall be measured and paid for seprately under relevant items of Schedule.

Inspecting, thoruoghly check, detection of fault, repairing the minor fault and replacement of defective spare part if any including cleaning of battery bank terminal and applying petrolium jelly on terminal by the skilled technician/ service Engr to UPS of capacity upto 5 KVA capacity testing on completion of said job upto the full sasisfication of Engr-in charge. Note : Spare/ part for replacement will be paid and measured seperately.

Supply & Fixing in repair control card for AC to DC complete all as specified and as directed.

Supply &Fixing in repair Drive card for internal circuit complete all as specified and as directed.

Supply &Fixing in repair IGBT card 600Volts complete all as specified and as directed.

Supply &Fixing in repair VIGBT 150A, 600 Volts complete all as specified and as directed.

Supply & Fixing in repair sealed maintenance free Battery 12V, 42 AH for UPS complete all as specified and as directed.

Supply & fixing in repar Cooling fan of UPS for capcity upto 10 KVA complete all as specified and as directed.

S & F LED flood light luminaire 20 W (WH/WW) including taking down of old defective fittings Complete all as specified and directed.

Supply & Fixing in repair sealed maintenance free Battery 12V, 7 AH complete al as specified.

Testing of lifts by lift Inspector authorized by Goa State Govt. complete all as specified and as directed.

Supply and fixing LED inverter batten fitiing of 18/20W working on AC supply in normal mode and DC supply in inverter mode,with in built battery backup of upto 4 hrs ,high efficiency , high lumens output complete all as specified and directed.

Supply and fixing LED inverter bulb of 9/10W with base B22/E27 working on AC supply in normal mode and DC supply in inverter mode,with in built battery backup of upto 4 hrs ,high efficiency , high lumens output complete all as specified and directed.

Supply only LED bulb 0.5 Watts Color WH/WW/BL/GR/YL/RD with base B22 all as specified and directed by Engr-in-Charge.

Supply only LED bulb 3 Watts Color WH/WW with base B22 all as specified and directed by Engr-in-Charge.

Supply only LED bulb 7/9 Watts Color WH/WW (B22 & E27) all as specified and directed by Engr-in-Charge.

Supply only LED bulb 7/9 Watts Color WH/WW (B22 & E27) all as specified and directed by Engr-in-Charge.

Supply and fixing 40 Watts LED Batten fitting 4ft long ,Anodized extruded aluminium housing, high transmissitivity diffuser with high lumen output complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including removal of old unserviceable one complete all as specified and as directed.

Supply and fixing focus LED light of 01 watts complete all as specified and as directed.

Supply and fixing focus LED light of 03 watts complete all as specified and as directed.

Supply and fixing focus LED light of 18 watts complete all as specified and as directed.

Supply and fixing outdoor wall LED light of 1x3 watts ,IP54 complete all as specified and as directed.

Supply and fixing outdoor wall LED light of 2x3 watts ,IP54 complete all as specified and as directed.

Shine Enterprises

sanjay prabhu