SPL REPAIR TO STORAGE SHED (BLDG NO T-03) AT GE GAYA

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L for providing PCC type B0, 1 : 2 : 4, (using 20 mm graded aggregate) as in coping, and the like including weathering, slightly rounded or chamfered angles and throating complete with using WPC.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.

M & L for rendering 15mm thick internal surfaces on brick work in cm 1:6 in and finishing surfaces even and fair without using extra cement complete.

M & L for rendering 15mm thick in two layers on external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC. Note :- WPC measured and paid separatly

Supply only liquid water proofing compound (Make : Sika Latex Power)

M & L for preparation of new plastered surfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed.

M & L two coat of cement base paint white or tinted on walls or fascia of roof or chajjas on new or old decorated prepared plastered/painted surfaces of bldg complete all specified & directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises.

M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM 1:4 complete.

M & L for non skid ceramic coloured tiles (square/ rectangular) polished, area of each tiles not less than 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15 mm thick screed in CM 1:4 complete.

M&L double charge Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including 15mm thick screed bed of CM(1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using sub class old size bricks straight or curved on plan to any radius of half brick thick built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work using sub class old bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L form work to soffits of suspended slabs such as roof slab, floor slab not exc 200 mm thick complete.

M & L RCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves and the like complete.

M & L for Providing precast cement concrete type B-1 1:2:4 as in manhole covers including setting in cement mortar 1:4

S & F of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.

S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. (Make : Jaguar/Hindware)

S&F brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. (Make : Jaguar/Hindware)

S & F of 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.(Saint Gobain/ModiFloat)

S&F in repair 15 mm dia bore bib taps, brass chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm dia two way bib taps, brass fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F in repair 15 mm dia stop/angle valves, cast copper alloy, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe.

S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete.

S & F of Male Brass Threaded Adaptor (MTA/ MBTA) or Feale Brass Threaded Adaptor (FTA/ FBTA) complete.

S & F of PVC connections 15mm size with PTMT nuts of length 600mm

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place.

S & F 110mm dia bore PVC (SWR) bends with access door all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified.

S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete.

S&F of 1000 Lrts capacity white rotational Moulded ploythene water storage tank (cylinderical vertical with closed top) multilayered hoisted and fixed in position incl dismantling of existing tanks.

M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

M & L Plain cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in surface channel & drains complete

S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge.

S & F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete.

M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.

M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.

S & F as in repair aluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).

S&F powder coated aluminium frame /shutters for windows, ventilators sliding/openable etc including joining cleat for fixing, locking arrangement, rubber beading, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL/HINDALCO/ INDALCO. Note :- (i) Glazing and wire mesh shall be measured and paid separetely forsupply only as the labour element included in this item.(ii) Item shall be paid as per weight of aluminium section.(iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazingpin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing

M&L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl ms wire not less than 0.9mm dia.

Ditto all as per item no 46 above but 6 and over in stirrups, spacers and binders complete.

M & L for RCC Type B-1, 1:2:4 using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Dismanteling ceiling and wall boards of any type or any thickness inclluding cover fillets compleate all as specified and directed

M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed.

S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Dismantling of asbestos cement corrugated sheets as in roof coverings complete all as specified and directed.

M&L clean sawn Second class hard-wood in scantlings as in truss/ rafter/ purlin all as specified.

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165

M & L for Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long dia of neck is exc 11 mm but n.exc 20 mm complete.

S & F Pre- painted galvalume aluminum zinc coating (AZ 150) GI based corrugated steel sheet 0.50mm thick, coloured having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws at every alternate corrugations as specified and directed.

S & F pre-painted galvalume aluminum zinc coating (AZ 150) GI based plain steel sheet 0.5mm thick of any coloure in ridge having tensile strength of 550 Mpa fixed with self tapping screws as spd and directed by eng-in-charge etc.

M & L for 15- 18 mm Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F Vitreuos china wash hand basin size 560x450mm oval shape incl brackets or fixed to walls with anchor fasteners all cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pipe and CP waste coupling 32 mm dia complete fixed. (Make-Parryware/Hindware/Jaquar)

Supply & fix in repair brass chromium plated pillar tap swan neck long body fancy type for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete.

Taking down carefully aluminium point wiring (light, fan, socket or power ) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc., removing materials to store, or keeping in safe custody for re-use at site or offering credit, and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down old/ unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling/Wall fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light/fan/bell point controlled by one switch.

(b) One 5 pin socket outlet 5 Amps independent board.

(c) One 5 pin socket outlet 5 Amps on the same board with other switch.

Dito- as item no 5 above but One socket outlet 15 Amps independent with two single core 2.5 sqmm drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified and directed

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

S &F switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

M & L for Switch Socket combination 2 in 1 , 5 pin, 6 Amps flush type.

S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified.

S & F for wall mounted LED tube light fitting 18/20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Crompton Greaves Cat part No CCS-100-20-65-HL2-DP-NWH 20W or its equvalent in Philips, Havells.

S & F building security light fitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make:- Havells/Crompton/Bajaj.

Supply and fix MCB Distribution board double door made out of CRCA mild steel sheet surfce with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface/concealed mounting TPN 4 way, 440 volts with bus bar rating 200 Amps (vertical operation) and suitble size of cable gland -02 Nos, dust and vermin proof suitable for incorporation of MCCB 4 pole 125 amps 16 kA and MCB's and making all necessary connections complete all as specified and directed at site. Note : The cost of MCCB and MCB , isolators shall be measured and paid seperately.

Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete..

Supply and fix MCB single pole and neutral, 240 volts, 32-63 Amps, all as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

S&F in replacement of MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. Make : Havells/ L&T /Legrand

M&L Earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.

Sub main wiring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 6 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring and accessories. Note:- One run of conduit two run of 6 sqmm copper condictor & one run of 6 sqmm copper conductor is measured as one unit.

S&F 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, B class insulation comprising of electronic fan regulator, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding fan motor having power factor not less than 0.9, minimum service value 3.5 CMM/W, Air delivery minimum 245 CMM as per IS-374:1979 (amended upto Mar 2002) including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC supply complete all as specified and directed. Make: Havells/Usha/Khaitan/ Crompton

Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size complete all as specified and directed and including taking down existing cable any type.

(a) 4 core x 25 Sqmm

Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as per & directed.

Returning filling including spreading levelling watering & well Ramming in layers not Exc 25 cm complete all as spfd & directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

M&L for bricks common burnt sub class B designation for protection of cable complete all as specified and directed.

M&L for natural local river sand for cable protection.

MS HARI MOHAN GUPTA

M/S MAGADH CONSULTANT

M/S PANCHAM RAI SONS

M/s Subham Traders

BEHL ENGINEERS AND TRADERS

M/S SURYA BUILDERS