REPAIR REWIRING AND REPLACEMENT OF CONVENTIONAL LIGHT WITH LED TUBE LIGHTS CEILING LIGHT AND CONNECTEDREPAIRS AT VARIOUS LOCATION AT HQ CAFVD AND CEILING LIGHT AND OTHER MISC BUILDING UNDER AGE EM II IN GE C KIRKEE

Amount

Taking down carefully existing unserviceable aluminum / copper point wiring of any description & in any position with and including existing steel conduit / PVC Conduit / Casing caping fixed on surface/wall/angle/gardder and including all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, sockets, etc including sunken boxes/junction boxes and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed by Engineer in Charge.

M&L for point wiring in PVC coduit of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed by Engineer in charge.

All as per Srl item No 2 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches.

All as per Srl item No 2 above but point wiring for 5 pin socket outlet, 5 Amps on independent board.

All as per Srl item No 2 above but point wiring for one five pin socket outlet, 15 Amps & 5 Amp on independent board using 2.5 sqmm two run and one run 2.5 sqmm (nominal area) stranded copper conductor cable.

M&L for point wiring in PVC casing & caping of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed by Engineer in charge.

All as per Srl item No 6 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. Size.

All as per Srl item No 6 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches.

All as per Srl item No 6 above but point wiring for 5 pin socket outlet, 5 Amps on independent board.

All as per Srl item No 6 above but point wiring for one five pin socket outlet, 15 Amps & 5 Amp on independent board using 2.5 sqmm two run and one run 2.5 sqmm (nominal area) stranded copper conductor cable.

Material and labour for point wiring for one light/ fan/ bell point controlled by one switch in steel conduit with all steel enamelled fittings such as elbow bends, junction boxes, supporting clamps for proper hanging arregements made out from 20x1mm flat aluminium patti including nuts, bolts and bending to shape etc. of appropriate size but not less than 20mm on surface with two run of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 Sqmm nominal cross sectional area 1100 volts grade and including one run of 1.5 sqmm (green colour) PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire incl. suitable size sunken type Galvanised pressed sheet steel 1.6 mm thick terminal box of suitable size with 3 mm thick laminated hylum sheet for mounting switches, sockets etc. and making good the disturbed wall and painting the same with matching colour of the existing wall, incld material all as specified and directed Engineer in Charge.

All as per Srl item No 11 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches.

All as per Srl item No 11 above but point wiring for 5 pin socket outlet, 5 Amps on independent board.

All a s per Srl item No 11 above but point wiring for one five pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 2.5 sqmm two run and one run 2.5 sqmm (nominal area) stranded copper conductor .

Supplying & fixing switch flush type, 5 Amps, single pole, one way , 230 volts AC circuit complete all as specified & directed by Engineer in Charge.

Supplying & fixing switch flush type, 5 Amps, Bell push , flush type , 230 volts AC circuit complete all as specified & directed Engineer in Charge.

Supplying & fixing socket outlet, five pin, 5 Amps, flush type, multipurpose, 230 volts AC circuit complete all as specified & directed Engineer in Charge.

Supplying & fixing switch flush type, 15 Amps, single pole, one way , 230 volts AC circuit complete all as specified & directed Engineer in Charge.

Supplying & fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type , flush type, 230 volts AC circuit complete all as specified & directed Engineer in Charge.

Supplying & fixing ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified & directed Engineer in Charge.

Supply and fixing in replacement Stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified & directed Engineer in Charge.

Dismantling and Taking out old unserviceable copper/aluminium sub main wiring/Unarmoured cable (used as Sub main wiring) from any height of any Size and Core with all connecting accessories incld. conduit or casing caping and incld. making good to the disturbed wall and painting the same with matching paint as of existing wall including material all as specified and directed by Engineer in charge.

Material & Labour for Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 2.5 sqmm, 1100 volt grade conforming to IS drawn through with and including New 20 mm size steel conduit and including one single core PVC insulated multi stranded unsheathed copper conductor cable, 2.5 sqmm, FRLSH green in colour as continuous earth wire including all accessories and fixing arrengements, supporting clamps, bends, sockets and connecting items etc. all as specified and directed Engineer in Charge.

Material and labour for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through with and including New PVC non metallic conduit 20 mm dia including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade,green in colour as earth contuinity wire all as specified and directed by Engineer in charge.

Dismantling and drawing out old unserviceable Sub Main Aluminium/copper wiring from Existing Steel/PVC Conduit of any size and any type from any height with all connecting accessaries (excluding conduit or casing caping) and making good the disturbed wall and painting the same with matching to existing wall including material all as specified and directed by Engineer in charge.

Material and labour Sub main wiring at any height including using two single core PVC insulated copper conductor cable (FRLSH) of size 1.5 sqmm 1100 volt grade conforming to IS drawn through existing Steel/ PVC conduit including 1.5 sqmm. PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed by Engineer in Charge.

Material and labour Sub main wiring at any height including using two single core PVC insulated copper conductor cable (FRLSH) of size 2.5 sqmm 1100 volt grade conforming to IS drawn through existing Steel/ PVC conduit including 2.5 sqmm. PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed by Engineer in Charge.

Material and Labour for Sub main wiring at any height with four single core PVC insulated copper conductor cable (FRLSH) of size 6 sqmm 1100 volt grade conforming to IS drawn through Existing Steel / PVC conduit including two single core 6.0 sqmm PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed by Engineer in Charge. (Note for item No 26 to 28) - Two/Four runs of wiring cable and One/Two runs of earth continuity wire shall be measured as one length.

Disconnecting and taking down old existing damaged metallic rigid steel conduit of any size and any type from any height with all fittings complete all as specified and directed by Engineer in Charge.

Supply & fixing hot galvanised rigid steel conduit 25 mm dia, light grade, at any height with and incld. of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, screws, clips, plugs, clamps etc. for securing , conduits etc. to walls,ceiling, steel joists etc. complete all as directed by Engr-in-Charge.

Supply & fixing hot galvanised rigid steel conduit 20 mm dia, light grade, at any height with and incld. of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, screws, clips, plugs, clamps etc. for securing , conduits etc. to walls,ceiling, steel joists etc. complete all as directed by Engr-in-Charge.

Disconnecting and taking down old switch fuse type distribution Box with MCB/fuse grip TPN/SPN DB 2 Way to 12 Way old type DB including taking out all cable connections of any description and in any position and M&L for making good the disturbed surface of walls, to match with the existing surfaces complete all as specified and directed by Engineer in charge.

Supply and fix, connecting & testing of VTPN DB of 12 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damage like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed by Engineer in charge,of Make Legrand Cat.No. 507748 or equivalent from list of make as approved by GE. Note : MCCB , MCB required for this item shall be measured and paid separately under relevant item of this schedule.

Supply and fix, connecting & testing of VTPN DB of 4 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed by Engineer in Charge, of Make Legrand Cat.No. 507745 or equivalent from list of make as approved by GE. Note : MCCB , MCB required for this item shall be measured and paid separately under relevant item of this schedule.

Supply and fix, connecting & testing SPN DBs of 8 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed by Engineer in Charge, of Make Legrand Cat.No. 507611 or equivalent or equivalent from list of make as approved by GE.

Supply and Fix, connecting & testing SPN DBs of 12 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed by Engineer in Charge, of Make Legrand Cat.No. 507612 or equivalent from list of make as approved by GE.

Supply and Fix, Thermal magnetic adjustable MCCB 160 Amps 4 pole with breaking capacity 25 KA & shall be Ics=Icu 100%, complete all as specified and directed by Engneer in charge of Make Legrand-DPX3 cat No 420057 or equivalent from list of make as approved by GE.

Supply and fix, Thermal magnetic adjustable MCCB 100 Amps 4 pole with breaking capacity 25 KA & shall be Ics=Icu 100%, complete all as specified and directed by Engneer in charge of Make Legrand-DPX3 cat No 420055 or equivalent from list of make as approved by GE.

Supply and fix, Thermal magnetic adjustable MCCB 63 Amps 4 pole with breaking capacity 25 KA & shall be Ics=Icu 100%, complete all as specified and directed by Engneer in charge of Make Legrand-DPX3 cat No 420053 or equivalent from list of make as approved by GE.

Supplying & fixing MCB 6 to 32 Amps, single pole and neutral, "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed by Engineer in Charge.

Supplying & fixing MCB 6 to 32 Amps, single pole, 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, complete all as specified and directed by Engineer in Charge.

Material and labour for Removing of old HPMV / MH high bay light fittings at 12 to 15 mtr height carefully without damaging connector or ceiling rose complete all as specified and as directed by Engineer in Charge. Note:- If any damage happens to the government property, the same shall be repaired by the contractor without any extra cost.

Supply and fixing at 5 to 9 mtr height-150W Industrial LED Highbay luminaire with >130Lm/Watt, Powder coated PDC Aluminium body & PC Optical Lenses with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source make Cree,Osram including safety chain with i bolt connection with and including 1.5 sqmm three core cable from connector or ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge. Make:- Crompton, Cat No:- LHB11-150-CDL/60-HPM or equivalent from list of make as approved by GE. NOTE :- The quoted rates are deemed to be inclusive of the cost of Nut-bolts, washers or clamps required to be replaced if old one are found unserviciable or of diferant size/shape for completion of work as directed by Engineer in Charge.

Removing of old main switch after disconnecting the incoming and outgoing cables and supply and fix MCCB thermal magnetic release four pole 25 KA 63 Amps, Make:- Legrand ,Cat No 420053 with one way metal enclosure, Cat No 507801 of legrand and making conections of cables with suitable size nutbolt etc including making good the disturbed suface of wall including required material complate all as specified and directed by Engineer in Charge.

Removing of old main switch after disconecting the incoming and outgoing cables and supply and fix MCCB thermal magnetic release four pole 25 KA 100 Amps, Make:- Legrand, Cat No 420055 with one way metal enclosure, Cat No 507801 of Legrand and making conections of cables with suitable size nutbolt etc including making good the disturbed suface of wall including material complate all as specified and directed by Engineer in Charge.

Removing of old main switch after disconecting the incoming and outgoing cables and supply and fix MCCB thermal magnetic release four pole 25 KA 160 Amps, Make:- Legrand, Cat No 420057 with one way metal enclosure, Cat No 507801 of Legrand and making conections of cables with suitable size nutbolt etc including making good the disturbed suface of wall including material complate all as specified and directed by Engineer in Charge.

Removing of old main switch after disconecting the incoming and outgoing cables and supply and fix Industrial plug and socket board TP 32 Amps including plug top and MCB "C" curve 10 KA 32 Amps, Make:- Legrand, Cat No 507818 and 408658 of Legrand and making conections of cables with suitable size nutbolt etc including making good the disturbed suface of wall including material complate all as specified and directed by Engineer in Charge.

Removing of old main switch after disconecting the incoming and outgoing cables and supply and fix one way metal enclosure Cat No 507793 and MCB "C" curve TPN 10 KA 32Amps, Make:- Legrand, Cat No 408680 and making conections of cables with suitable size nutbolt etc. including making good the disturbed suface of wall including material complate all as specified and directed by Engineer in Charge.

Supply, fixing, connecting and testing in replacement Industrial Earth Plug & socket with sheet metal enclosure of IP44 rating electric driven single phase including MCB 'C' series SP 20 Amps and supplied with neutral links complete all as specified and directed by Engineer in Charge.

Supply, fixing, connecting and testing in replacement Industrial Earth Plug & socket with sheet metal enclosure of IP44 rating electric driven three phase including MCB 'C' series TP 20 Amps and supplied with neutral links complete all as specified and directed by Engineer in Charge.

M & L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, at any height, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint for mounting Air Circulator / Exhaust Fan / Ceiling Fan for fixing arrangements complete all as specified and as directed by Engineer in Charge.

Dismantling and Taking down unserviceable existing light fittings 1X 40 Watt / 2X 40 Watt/ 70 watt or any other wattage security lihgts of any size and capacity from any location/height after disconnecting of electrical connection complete including all connected accessories complete all as specified and as directed by Engr-in-Charge.

Supplying, fixing, connecting up to existing/new ceiling rose and testing industrial box type batten with precoated CRCA body, LED tube light fitting suitable for and including 1x20 W 4 feet long tube with polycarbonate diffuser ,LED lamp efficay -110 Lum/W ,THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV , power factor ≥0.9 including connecting with 23/0.0076 copper conductor flexible twisted three core cable including all accessories for fixing on steel trusses / false ceiling including dismantling of old fittings complete all as specified & directed by Engineer in Charge. Make:- Crompton, cat no-IGP161LT8-16 & LT8-20-865 or equivalent from list of make as approved by GE.

Supplying, fixing, connecting in at any height up to existing/new ceiling rose and testing LED luminarie made up of precoated CRCA housing provided with cum reflector finished in white powder coating, completely prewired with accessories up to terminal block suiatble for 2x 20W 4 feet long LED tubes (High Lumen-110 Lumen/Watt) and including connecting with 23/0.0076 copper conductor flexible twisted three core cable and fixing arrangements for fixing on steel trusses / false ceiling including dismantling of old fittings all as specified & directed by Engineer in Charge. Make:- Crompton, Cat no-IGP162LT8-16 & LT8-20-865 are equivalent from list of make as approved by GE.

Supplying, fixing, connecting in at any height up to existing/new ceiling rose and testing LED batten with 20 W LED light source in integral module with polycarbonate/Acrylic diffuser more than 85%efficiency of light with LED lamp efficay as 110 Lum/W THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV , power factor ≥0.9, and connecting with 23/0.0076 copper conductor flexible twisted three/ two core cable fittings conection complete all as specified & directed by Engineer in Charge. Make crompton cat no-CCS-100-20-65-HL2-DP-NWH or equivalent from list of make as approved by GE. Notes for item No 54 and 55:- 1.) Stove enamelled black steel conduit or cahin shall be measured and paid separately under relevant items of this schedule. 2.) Quoted rate is deemed to be inclusive of conduit fittings and bell mouthed threaded sockets and any misc materials required for fixing new luminaries as directed by Engineer in Charge.

Supply and fixing New LED Flood Light Fitting 100 watt energy efficient >100 lumen per watt with poweder quoted Aluminium body & toughened glass visor all as per Make Crompton, cat part No CFS 504 100 57 NL SL GL NSG or equivalent from list of make as approved by GE with and including PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm - 03 core upto 2 RM complete all as specified and directed by Engineer-in-Charge.

Supply and fixing New LED Flood Light Fitting 120 watt energy efficient >100 lumen per watt with poweder quoted Aluminium body & toughened glass visor all as per Make Crompton, cat part No CFS 504 120 57 NL SL GL NSG or equivalent from list of make as approved by GE with and including PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm - 03 core upto 2 RM complete all as specified and directed by Engineer-in-Charge.

Supply and fix linear susended light fitting 40 W LED with aluminium extruded owder coated white housing in built up electronice LED driver having heat resistance IP 20 protection fixing arrangements for light fitting to steel trusses / false ceiling/ ceiling suspended by 2 nos. Ø19/20 mm rigid stove enamelled black steel conduit with bell mouth threaded sockets or with chains complete including dismantling of old fittings all as specified & directed with complete assesories complete all as specified and directed by Engr In charge. Make-Crompton, Cat no- BPCS 40 W LED 4F WH or equivalent from list of make as approved by GE. Note:- 1.) Stove enamelled black steel conduit or chain shall be measured and paid separately under relevant items of this schedule. 2.) Quoted rate is deemed to be inclusive of conduit fittings and bell mouthed threaded sockets and any other misc material required for fixing new luminarie as directed by Engineer in Charge.

Supplying, fixing, connecting up to existing/new ceiling rose and testing 36 W aesthetically designed 2x2 LED recess mounting in grid/armstrong type ceiling including suitable LED driver and connecting with 23/0.0076 copper conductor flexible twisted two core cable to existing/new ceiling rose and including mounting accessories complete all as specified & directed by Engineer in Charge. Make:- Bajaj, Cat No:- LCTLRNE-36-F0-CDL or equivalent from list of make as approved by GE.

Om Construction

JP ENTERPRISES

M/S PREETAM KUMAR SHIVAJI SHINDE

Sahara Engineers

metro electrical services

M/S. Niksun Electro-Infra Private Limited

T.H.ASSOCIATES

Sachin Electricals