Supply, Testing and Commissioning of Battery Car (01 Nos 8 seater) including Development Of Charging Place cum Parking Shed along with other allied works at PEQ Marta, Ramnagar

Supply, Erection, Installation, Testing & Commissioning of 01 nos. 8 wheeler Duel Gun CCS2 (3.3 kw -22KW )AC with 3 years Comprehensive Annual Maintenance after 1 Year post warranty period Technical Data (IEC) AC Charger Type2 AC Configuration with cable Cable lengths (m) >=3.5 AC nominal input Voltage V (230-415 ± 5%) Frequency Hz (50) AC output Number of output 1 Rated power kW (3.3-22) Voltage (range) V 415V Current of connected cables (max.) A -32A Efficiency factor η (at load 100%) % Power factor cos phi Short-circuit current rating KVA, THDi % Ripple factor Environmental conditions Operating environment Ambient Temperature 0-55 deg Operating temperature ° C -20 to 60 deg Noise Level Relative humidity % 5 - 95 General specifications Local user interface 4.3" Graphic display Language English User authentication and payment Mobile application / user interface QR codes / RFID cards / password login RFID specification RC 522 RFID Reader ISO/ IEC 14443A/ MIFARE Network connection Ethernet interface; 3G and 4G Complete job refers to scope of work in SBD

Supply, Testing and Commissioning of 8 wheeler Electric Vehicle, 08 seater with 3 years Comprehensive Annual Maintenance after 1 Year post warranty Technical Specifications • Seating Capacity- 8 • Power Train -Electric • Type of Motor Three Phase AC Induction Motor • Type of Wheel Drive Two Wheel Drive (Rear Wheels) • Pay Load Capacity (as per manufacturer certicate) 500-1500 kilogram • Gross Vehicle Weight (Weight of Vehicle+ Pay Load Capacity) 1000-2000 kilogram • Max Speed in km/hr 20-35 • Rated Power Output of Motor (Watt) >3000<=6000 • Rated power output of Motor as per manufacturer certicate (Watt) 5000 Watt-10000 watt • Batteries: 48-72 volt , 120-150amp • Type of Battery Lithium Ion/Lead acid • Charging: Automatic Charger With On Board Computer • Frame/Chassis :Aluminium Box Beam with Composite Cross Rubber Complete job refers to scope of work in SBD

Fabrication, Erection and Construction of High Quality Stainless Steel CANOPY cum Parking Shed for EV Battery Charging point of Approx. overall dimensions 15' x 15' x 12' Approx. supported on a Triple Column Square Hollow Section of size 300mmx300mmx5mm and Cantilever Beams Square Hollow Section of size 72x72x3mm. Construction of foundations for columns -03 Nos of size 3'x3'x4' (3' BGL and 1' AGL) and RCC platform of size as per site requirements by way of Earthwork in excavation (Foundations, Plinth, Raft etc.). Providing and laying of cement concrete (1:5:10) using 40mm nominal size Nallah stone, Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level of appropriate size, Centering and shuttering Filling available excavated earth, Cement concrete flooring and foundation as the site requirement 1:2:4, Structural Steel work for shed in built up section, trusses and framed work including cutting, hosting, fixing in position and applying a priming coat of approved steel primer all complete using riveted and bolted / welded, including nut - bolts, foundation bolts, drilling fasteners, torr washers Tie beam and rafter etc of appropriate size for Canopy, Providing and laying in position specified grade of reinforced cement concrete including curing Complete job refers to scope of work in SBD

Comprehensive Annual Maintenance of the Electric Vehicle and Charging unit installed for EVs for three (03) years after completion of the mandatory 01-year Defect Liability period

For 1st year @ 5% of the Quoted Amount for S. No 1 & 2 only

For 2nd year @ 7.5% of the Quoted Amount for S. No 1 & 2 only

For 3rd year @ 10% of the Quoted Amount for S. No 1 & 2 only