Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹19.5 L+₹4,889.06 (0.25%)Accepted-Finance | L2 | Accepted-Finance L2 | |
| 3 | L3₹20.8 L+₹1.3 L (6.90%)Accepted-Finance | L3 | Accepted-Finance L3 | |
| 4 | L4₹25.0 L+₹5.5 L (28.4%)Accepted-Finance | L4 | Accepted-Finance L4 |
Tender Value
Refer Docs
EMD Value
₹21,340
Closing Date
7 Jan 2020, 12:00 pmClosed
EE REW REASI
DC OFFICE COMPLEX BLOCK 2,ROOM NO 205
Construction of Mali Hut at Fruit Plant Nursery at Pouni, Pyt .and Block Pouni ,Distt. Reasi
2019_RDPR_89455_1
e-NIT no. 13 of REW Reasi 2019-20,dated 31-12-2019
Open Tender
Civil Works
Item Rate
90 days
POUNI
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer REW Reasi
₹21,340
15 Jan 2020
31 Dec 2019
7 Jan 2020
31 Dec 2019
7 Jan 2020
31 Dec 2019
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil (including all leads, lift and carriage complete job)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. (including all leads, lift and carriage complete job)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size) (A) Crushed (including all leads, lift and carriage complete job)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed (including all leads, lift and carriage complete job)
b) supply and filling of plum(boulders)(including all leads, lift and carriage complete job)
Centring and shuttering including strutting, propping etc. and removal of form for· (a) Foundations: footings, bases of columns etc. for mass concrete.
Suspended floors, roofs, landings, balconies and access platform.
Lintels, beams, plinth beams, girders, bressumers and centilevers.
Edges of slabs and breaks in floors and walls. Under 20cms wide
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 12. 5mm nominal size) (A) Crushed (including all leads, lift and carriage complete job)
Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth(a) Cement mortar 1:6 ( 1 cement : 6 fine sand) (including all leads, lift and carriage complete job)
Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all leads, lift and carriage complete job)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate ,20 mm nominal size
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all leads, lift and carriage complete job)
6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) (including all leads, lift and carriage complete job)
15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all leads, lift and carriage complete job)
supply and filling with sand under floors , incl watering , ramming, consolidating and watering lead upto 50 mts(including all leads, lift and carriage complete job)
Providing and laying Cement Concrete Flooring 1:2:4 mix 40mm thick with 20mm nominal size stone aggregate. (a) Crushed. (including all leads, lift and carriage complete job)
Providing and laying vitrified floor tiles in different sizes Size of tile 60x60cm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (including all leads, lift and carriage complete job)
Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(including all leads, lift and carriage complete job)
Providing wood work in frames of doors, windows, (a) Sal wood clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)
Providing and fixing panelled or panelled and glazed Shutters (a)Second class deodar wood 35 mm thick shutter shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge
Providing and fixing 35 mm thick wire gauze shutters _,. using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : 9.22.1 lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size(a) Second class deodar wood.
Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface 13.54.1 Water thinable Cement primer
Finishing walls with water proofing cement paint of required shade (a) New work (two or more coats) applied @3.84 kg/1 Osqm
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth (including all leads, lift and carriage complete job)
Applying priming coat: 13.56.1 with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. (a) Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked
Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butthinf!eS bright finished of required size with necessary (a)35mm thick shutters
Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 em long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters. 1 0.8.1 80x1.25 mm M.S. laths with 1.25 mm thick
Weird Technocrats
M/S JAI MAA KALIKA BUILDERS
Valley Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .