138WE/L-36/25-26

Amount

Dismantling of burner assembly of CHS and remvoing of side cover and repairing the same by removing the old burnt fire refractory cement plastering, replastering the same as per existing with fire refractory cement for boiler capacity 6.0 lakh kilo/cal/hr and complete servicing the boiler by removing the complete carbon/oil deposits with suitable coil shine chemical including repair to coil assembly by welding if there is any leakages found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in Charge. Note : - The major spare parts for replacement shall be measured and paid separately under respective items of schedule.

Supply only fuel pump suitable for 6 Lakh kilo cal/Hr boiler (as per samle) complete all as specified and directed by Engr-in-Charge

Supply only temp controller digital type TC513A/TC513AX/TC533AX 85 to 270 Volt AC/DC 50/60 Hz 5 VA DTC 503 with sensor suitable for 6.0 lakh kilo/Cal/hr LAL 2.25 burner rod assembly, (as per Sample) complete all as specified and directed by Engr in Charge.

Supply only in sequence controller suitable for 6.0 lakh kilo/hr with burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only ignition rod suitable for 6.0 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only Electrode suitable for burner of capacity 6.0 lakhK/Cal/Hr complete all as specified and directed by Engr in charge.

Supply only ignition Transformer electronic type suitable for 6.0 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only photo cell as per existing suitable for 6.0 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only burner nozzle suitable for 6.0 lakh K/Cal/Hr complete all as specified and directed by Engr in charge.

Dismantling of burner assembly of CHS and remvoing of side cover and repairing the same by removing the old burnt fire refractory cement plastering, replastering the same as per existing with fire refractory cement for boiler capacity 1-2 lakh kilo/cal/hr and complete servicing the boiler by removing the complete carbon/oil deposits with suitable coil shine chemical including repir to coil assembly by welding if there is any leakage found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in Charge. Note : - The major spare parts for replacement shall be measured and paid separately under respective items of schedule.

Supply only complete burner assembly including all connected accessories suitable for 1-2 akh kilo/Cal/hr including installation,testing & commissioning (As per Sample) complete all as specified and directed by Engr in Charge.

Supply only Electrode suitable for burner of capacity 1-2 lakh K/Cal/Hr complete all as specified and directed by Engr in Charge.

Supply only fuel pump suitable for 1-2 Lakh kilo cal/Hr boiler (as per samle) complete all as specified and directed by Engr-in-Charge

Supply only photo cell as per existing suitable for 1-2 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only sequence controller suitable for 1-2 lakh kilo/hr with burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only temp controller digital type DTC 503 with sensor suitable for 1/2 lakh kilo/Cal/hr LAL 2.25 burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only ignition rod suitable for 1-2 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only burner nozzle suitable for 1-2 lakh K/Cal/Hr complete all as specified and directed by Engr in Charge.

Supply only ignition Transformer electronic type suitable for 1-2 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Labour only for attending of break down/day to day complaint or call on attending any break down or maint work in CHS located in GH OTM,FSH and "C" Mess checking the serviceability of fan coil unit of any capacity for having continuous sreviceability of FCU for any number of time as desired by Engr-in-Charge including replacement of minor spare part like Gasket, Teflon tape, flare nut, tightening of any loose glycol line connections, shifting FCU from one place to another place if required, heating up the freezed glycol line any where about the premices to have continuous flow of glycol fluid, repairing the insulation of pipe line of any size by providing shallow tape / GI wire as deemed fit, for fastening the insulation with pipe line, stopping any kind of leakage from any size of pipe line, tightening the loose electrical connections as related with FCU / Heating system, cleaning the air filter including radiator of FCU to the entire satisfaction of Engineer-in- Charge complete all as directed at site.

Supply only pressure gauage 0 to 20 Kg/cm sq as per existing,complete all as specified and directed by Engineer-in-Charge.

Supply only Bridge rectifire complete all as specified and directed by Engr in Charge.

Supply only hooter round type complete all as specified and directed by Engr in Charge.

Supply only thermostate assembly tail type as per existing suitable for 0 TO 30 degree centrigrade temprature, complete all as specified and directed by Engr in Charge.

Supply only exhaust pipe by welding, complete all as specified and directed by Engr-in-Charge.

Supply only auto air pressure valve 3/8" as per existing, complete all as specified and directed by Engr in Charge.

Supply only High pressure fuel pipe 1.5 mtr as per existing,complete all as specified and directed by Engr in Charge.

Material and labour for taking down and Re fixing the same after rewinding of electric motor 3 phase 415 volts of capacity 3.0 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.

Supply only base frame for monoblock motor of capacity 3 HP (as per sample) complete all as specified and directed

Supply only mechanical seal for monoblock motor of capacity 3 HP (as per sample) complete all as specified and directed

Supply only bearing of capacity 3 HP monoblock motor (as per sample) complete all as specified and directed by Engr-in-charge

Supply only SS impeller of capacity 3 HP monoblock motor (as per sample) complete all as specified and directed by Engr-in-charge

Supply only tail end cooling fan for monoblock motor of capacity 3 HP non metalic (as per sample) complete all as specified and directed

Supply only pump sleeve for monoblock motor of capacity 3 HP (as per sample) complete all as specified and directed

Material and labour for taking down and Re fixing the same after rewinding of electric motor 3 phase 415 volts of capacity 5.0 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.

Supply only pump sleeve for monoblock motor of capacity 5 HP (as per sample) complete all as specified and directed

Supply only bearing of capacity 5 HP monoblock motor (as per sample) complete all as specified and directed by Engr-in-charge

Supply only tail end cooling fan for monoblock motor of capacity 5 HP non metalic (as per sample) complete all as specified and directed

Supply only SS impeller of capacity 5 HP monoblock motor (as per sample) complete all as specified and directed by Engr-in-charge

Supply only mechanical seal for monoblock motor of capacity 5 HP (as per sample) complete all as specified and directed

Supply only base frame for monoblock motor of capacity 5 HP (as per sample) complete all as specified and directed

Disconnecting the electric connection and dismentaling the electric motor 3 phase of cap 7.5/10 HP and re-assembling the electric motor after rewinding incl transportation complete all as specified and directed.

Supply only pump sleeve for monoblock motor of capacity 7.5 HP (as per sample) complete all as specified and directed

Supply only mechanical seal for monoblock motor of capacity 7.5 HP (as per sample) complete all as specified and directed

Supply only bearing of capacity 7.5 HP monoblock motor (as per sample) complete all as specified and directed by Engr-in-charge

Supply only tail end cooling fan for monoblock motor of capacity 7.5 HP non metalic (as per sample) complete all as specified and directed

Supply only SS impeller of capacity 7.5 HP monoblock motor (as per sample) complete all as specified and directed by Engr-in-charge

Supply only base frame for monoblock motor of capacity 7.5 HP (as per sample) complete all as specified and directed

Dismantling of burner assembly of CHS and remvoing of side cover and repairing the same by removing the old burnt fire refractory cement plastering, replastering the same as per existing with fire refractory cement for boiler capacity 3-4 lakh kilo/cal/hr and complete servicing the boiler by removing the complete carbon/oil deposits with suitable coil shine chemical including repair to coil assembly by welding if there is any leakages found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in Charge. Note : - The major spare parts for replacement shall be measured and paid separately under respective items of schedule.

Supply only fuel pump suitable for 3-4 Lakh kilo cal/Hr boiler (as per samle) complete all as specified and directed by Engr-in-Charge

Supply only temp controller digital type (TC513A/TC513AX/TC533AX 85 to 270 Volt AC/DC 50/60 Hz 5 VA)/ (DTC 304-2) with sensor suitable for 3-4 lakh kilo/Cal/hr LAL 2.25 burner rod assembly (As per sample), complete all as specified and directed by Engr in Charge.

Supply only photo cell as per existing suitable for 3-4 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only burner nozzle suitable for 3-4 lakh K/Cal/Hr complete all as specified and directed by Engr in charge.

Supply only Electrode suitable for burner of capacity 3-4 lakhK/Cal/Hr complete all as specified and directed by Engr in charge.

Supply and Fixing in sequence controller suitable for 3-4 lakh kilo/hr with burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only ignition rod suitable for 3-4 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only ignition Transformer electronic type suitable for 3-4 akh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.

Supply only complete burner assembly including all connected accessories suitable for 3-4 akh kilo/Cal/hr including installation,testing & commissioning (As per Sample) complete all as specified and directed by Engr in Charge.

Material and Labour for servicing to the glycol pump and motor of capacity 3.0 HP, 2870 RPM including replacement of bearings, oil seals or any other spares / work required for smooth functioining of pump, complete all as specified and directed by Engr in Charge.

Material and Labour for servicing to the Diesel pump and motor of capacity upto 3.0 HP, 2870 RPM including replacement of bearings, oil seals or any other spares / work required for smooth functioining of pump, complete all as specified and directed by Engr in Charge.

Material and Labour for servicing to the glycol pump and motor of capacity 5.0 HP, 2870 RPM including replacement of bearings, oil seals or any other spares / work required for smooth functioining of pump, complete all as specified and directed by Engr in Charge.

Material and labour for taking down and Re fixing the same after rewinding of electric motor single phase 240 volts of capacity 1-2 HP with superior quality super enameled copper winding wire of appropriate size and gauge as per existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.

Material and Labour for disconnecting the all connection in existing panel board complete and re-fixing the same after removing the burnt lugs/thimbles complete including replacing the U/S MCCBS, Contactors, rley, bus bar indicator lamps etc., all as specified and as direcrted by Engr-in-Charge. Note- MCCBS, Contactors, rley, indicator lamps, S/Switchs, voltmeter, Ammeter are to be measured and paid seperately.

Supply only contactor type 3 TF 33, 415 volts complete all as specified and directed by Engr-in-Charge. Make- Siemens, L & T , Havells

Supply only contactor type ML 1.5, 220 volts, complete all as speified and directed by Engr-in-Charge. Make- Siemens, L & T , Havells

Supply only over load relay 8 to 12.5 Amps for contactor matching ser No 48 series 3 TF 33 complete all as specified and directed by Engr-in-Charge. Make- Siemens, L& T , Havells

Supply only over load relay 1.25 to 2 Amps for contactor matching ser no 49 series 3 TF 33 complete all as specified and directed by Engr-in-Charge. Make- Siemens, L& T , Havells

Supply only digital type volt meter 0-500 volts, complete all as specified and directed by Engr-in-Charge.

Supply only digital type Amp meter complete with suitable CTs 0-300 Amps, complete all as specified and directed by Engr-in-Charge.

Supply only PVC flexible copper multistrand wire 3 core of 6 sqmm as per existing, complete all as specified and directed by Engr-in-Charge.

Supply only PVC flexible copper multistrand wire 3 core of 4 sqmm as per existing, complete all as specified and directed by Engr-in-Charge.

Supply only push button switch in RED or GREEN colours, 22mm dia as per existing, complete all as specified and directed by Engr-in-Charge.

Supply only indicating lamps RYB as per existing complete all as specified and directed by Engr-in-Charge.

Supply only rotary type ON/OFF switches, 22mm dia as per existing, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Pre-insulated MS pipe,Class 'C' having minimum thicknes of PUF insulation as mentioned below and of density 36 Kg/Cum and 26 gauge GI/AL cladding complete suitable for above ground as per sizes shown.The pipes should be insulated with closed cell puf of density 36±2 Kg/Cum of below mentioned thickness. The Pipe should be workable in the temp. range of -50 Degree Celcius to 120 Degreec Celcius. Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 200 mm dia and above.

Material and Labour for replacement of 200 mm with 65 mm PUF thicknes and 24 Gauge Al Cladding.

Material and Labour for replacement of 100 mm with 50 mm PUF thicknes and 24 Gauge Al Cladding.

Material and Labour for replacement of 80 mm with 50 mm PUF thicknes and 24 Gauge Al Cladding.

Material and Labour for replacement of 50 mm with 50 mm PUF thicknes and 24 Gauge Al Cladding.

Supply,Installation, Testing amd commissioning of PVC (minimum 15kg/sqcm pressure rated) drain water piping complete with fittings(elbows,tees, reducers,sockets,u trap etc.) supports, jointing insulated with XLPE class O tubular insulation and any other item required to make the system compelete. Nominal diameters of pipe in mms as inducated below:

25 mm dia pipe, Insulation thickness - 19 mm

15 mm dia pipe, Insulation thickness - 19 mm

Material and Labour for welding the leakage portion of MS pipe line including all T&P and materials required for welding the pipe line of size 25 mm to 200 mm including testing on full pressure complete all as specified and directed by Engr in Charge.

Supply and fixing in replacment of gun metal butter fly control valves of 40mm bore as per existing, complete all as specified and directed complete all as specified and directed by Engr in Charge.

Supply and fixing in replacment of gun metal butter fly control valves of 80 mm bore as per existing, complete all as specified and directed complete all as specified and directed by Engr in Charge.

Material and Labour for Cleaning of MS diesel storage tanks (day to day tank) of capacity up to 2000 ltrs by removing of sludge from tanks and scrapping the side walls by means of wire brush or emery paper and wash the same with castic soda and clear water and painting the internal wall with two coats of black rubber emulsion paint and painting the complete tank with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Cleaning of MS diesel storage tanks of capacity up to10000 ltrs by removing of sludge from tanks and scrapping the side walls by means of wire brush or emery paper and wash the same with castic soda and clear water and painting the internal wall with two coats of black rubber emulsion paint and painting the complete tank with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Cleaning of MS over head circulation tank of capacity 1000 ltrs of all type of T&P and chemical reqd the same , including welding work to lekage surface including opeaning and refixing the existing insulating material to the externalal surface including painting the complete tank from out side with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement of FCU connection flexible pipe 20/16 mm as per existing, complete all as specified and directed by Engr in Charge.

Supply and Fixing in replacement of FCU connection copper pipe 20/16 mm with check nut at both side as per reqd length, complete all as specified and directed by Engr in Charge.

Dismantling the existing radiator unit of capacity from 3000 to 6500 K Cal per hour, taking it to nearest workshop cleaning the complete unit with coil shine chemical, detecting the leakage protion by applying nitrogen gas pressure, brazing the leakage protion, refixing the same unit from dismantled location including testing on load complete all as directed at site by Engineer-in- Charge.

Supply and fixing radiator unit of FCU including connecting with the unit and making it leak proof of consisting of copper coils covered with aluminium finsing as per existing size of capacity 6000 K Cal / Hour including dismantling the existing unserviceable.

Supply and fixing radiator unit of FCU including connecting with the unit and making it leak proof of consisting of copper coils covered with aluminium finsing as per existing size of capacity 4500 K Cal / Hour including dismantling the existing unserviceable.

Supply and fixing radiator unit of FCU including connecting with the unit and making it leak proof of consisting of copper coils covered with aluminium finsing as per existing size of capacity 3000K Cal / Hour including dismantling the existing unserviceable.

Supply and fix Inlet/outlet forged brass ball valve 20 mm with Y stainer for FCU, hot water for 25 to 90 degree temperature as per existing, including supply and fixing of GI nipple of size 3/4 inch including welding work cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve complete all as specified and directed.

Supply and fix Inlet/outlet forged brass ball valve 15 mm with Y stainer for FCU, hot water for 25 to 90 degree temperature as per existing, including supply and fixing of GI nipple of size 3/4 inch including welding work cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve complete all as specified and directed.

Supply and fix in replacement of switch socket combination of 5 Amp flush type complete all as specified and directed by Engr in Charge.

Supply and fix in replacement of plug top 3 pin of capacity 5Amp complete all as specified and directed by Engr in Charge.

Material and Labour for Electrical Control Wiring for FCU of any size including electronic display complete as per sample all as specified and directed by Engr in Charge.

Supply and fix in replacement of needle valve 3/8 inch BSP as per existing complete all as specified and directed by Engr in Charge.

Supply and fix in replacement of ring 'O' Clip of flexible pipe of existing size complete all as specified and directed by Engr in Charge.

Supply and fix in replacement of Oil Pressure pump 7276-3D67A Complete all as specified and directed by Engr-in-Charge

Supply and Fixing in Repair/Replacement of fan coil unit parts, duel shaft electric motor of capacity 30 Watt 930 RPM, 3 speed as per existing complete all as specified and directed by Engr-in-Charge

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation , laying of pipes , cables etc. or for manholes pier holes poles not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard /dence soil complete all as specified and directed by engr in Charge. Note: Excavation for rectifying the Leakage for CHS Pipe of any dia .

Returning filling in soil including spreading levelling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr in Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 above the starting point including spreading and levelling complete all as specified and directed by Engr in Charge.

Supply and Fixing in replacement Temp controller regulator digital type complete (as per sample) all as specified and directed by Engr-in-Charge

Supply and fixing and replacement of chilled/hot water fan coil unit (FCU) vertical type floor mounting 2.5 TR capacity complete all as specfied and directed by Engr-in-charge. Make: Carrier/Zeco or equivalent ISI marked.

Supply and fixing and replacement of chilled/hot water fan coil unit (FCU) wall mounting 2.0 TR capacity complete all as specfied and directed by Engr-in-charge. Make: Carrier/Zeco or equivalent ISI marked.

Supply and fixing and replacement of wall mounted (ECO Panel) convector heater 2.5 KW/Hrs two heat out put set up with auto control and LED temperture display. Dimension - width 1200 mm, height 450 mm ,depth 90mm with complete fixing accessories. (Note : Old U/S converter heater to be deposited in MES store Yard

Supply and fix in replacement of Old Unserviceable Double skin type Floor mounted Air handling unit 4 rows deep coil Horizontal type of capacity 26000 CFM for Central heating system including complete all as specified and directed. Note : The Cost of taking down of Old U/S AHU's coil shall be deemed included in the unit rate.

EESSI (BID ID -3315039)

national engineering (BID ID -3317764)

Asian Marketing Co (BID ID -3324921)

MALIK CHAND SIRI RAM (BID ID -3325256)