Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC KAPASS MILL KALONI BAZPUR ROAD KASHIPUR GUDIYA DEPTT WALI GALI UDHAM SINGH NAGAR UTTARAKHAND 244713 | UDAM SINGH NAGAR | UTTARAKHAND | 244713 | L1 | Accepted-AOC L1 | |
| 2 | L2₹39.6 L+₹1.9 L (4.90%)Rejected-Finance H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹40.9 L+₹3.2 L (8.37%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹43.1 L+₹5.4 L (14.2%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹43.3 L+₹5.6 L (14.7%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari Jammu
COMPREHENSIVE REPAIRS TO TOILETS COOK HOUSE MESSES AND OTHER OTM ACCNS AT CERTAIN LOCATIONS AT Y STN UNDER AGE B/R I AT GE SATWARI
2023_MES_600420_1
GEJM-18/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE Satwari
D Class Cat a i
9 documents required · 9 mandatory
₹500
GE Satwari
₹98,000
Yes
12 Aug 2023
2 Jun 2023
24 Jun 2023
2 Jun 2023
22 Jun 2023
17 Jun 2023
Amount
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside the premises.
Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified & directed.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.
Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr as specified.
Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr as specified.
Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.
Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.
S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors.
S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors.
Taking down CI/PVC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.
Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.
S&F UPVC (SWR) Type-B, pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S&F UPVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, Fix to wall complete all as specified.
S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, fix to wall complete all as specified.
S&F UPVC (SWR) Type-B bends, 75 mm any radius complete all as specified.
S&F UPVC (SWR) Type-B bends, 110 mm any radius complete all as specified.
S&F UPVC (SWR) Type-B junction single, 75mm (Single T) equal or unequal complete all as specified.
S&F UPVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified.
S&F UPVC (SWR) Type-B, floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement complete all as specified.
S&F UPVC (SWR)Type-B gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.
S&F UPVC (SWR) Type-B vent cowl 75 mm dia complete all as specified.
S&F UPVC (SWR) Type-B reducers 110 mm dia complete all as specified.
S&F UPVC (SWR) Type-B branch piece, 110 mmm bore, single (single Y) equal or unequal cpmplete all as specified.
S&F UPVC (SWR) Type-B branch piece, 75 mmm bore, single (single Y) equal or unequal cpmplete all as specified.
S&F UPVC (SWR) Type-B 'P’ trap 110 mm, complete all as specified.
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.
M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.
Supply and fixing 35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified
M&L Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sampel approved by Engr-in-Charge or GE.
S&F Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.
S & F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.
Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats , Piano hinges measured separately.
S&F in repair continuous (piano) hinges,Width of flaps (when open) 30 mm heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)
S&F in repair Material & labour for 18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with leaping (10 to 5 mm thick three side and 20 to 15 mm thick leaping hinge side) around the shutter and fix with screws to etc complete all as specified and directed.
S & F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.
S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)
S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)
S&F Aluminium alloy, anodised, sliding door bolt Size 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.
S&F aluminium Floor door stopper fixed complete all as specified.
S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.
Supply and fixing in repair mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20-22 gauge and with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings)
M&L Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4.0 mm thick coloured/tinted/frosted glass panes including aluminium grill and all necessary fittings and fixtures complete all as per Engr-in-charge.
S&F for Aluminum Power coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
Supply and fixing 5.50 mm thick glass sheet ordinary quality Tinted ( approved by Engr-in-Charge/ GE) and glazed in squares, exceeding 0.5 Sqm in each pane.
Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.
S&F steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 ( Note:- Gril measured sparely)
S&F steel Ventilator ( N exc 0.70 Sqm) 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 ( Note:- Gril measured sparely)
S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.
M& L for dismantling boarding, any description, fixed in any position with screw complete all as specified and as directed.
S&F for 5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed.
Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.
S&F 4 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified.
S&F 4 mm thick figured glass, pin head/frosted type and glazing with oil putty in square n.exc 0.5 sqm in each pane.
S&F Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified.
S&F in repair Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified.
S&F in repair Bib tap long body 15 mm bore, standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). Complete all as specified.
S&F in repair Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses fancy type complete all as specified.
S&F in repair CP pillar cock with 450mm long braided hose, 15 mm bore fancy type complete all as specified and directed by Engr-in-charge/ GE.
S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified.
S&F in repair CP Bib taps,long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified.
S&F in repair Concealed Stop Cock Heavy Body Casted Cap 15 mm complete all as specified.
S&F in repair Wall Mixer 3-in-1 System with Provision for Both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand & Overhead Shower) fancy type complete all as specified.
S&F in repair angular stop cock with wall flange , cast copper alloy, chromium plated fency type screwed with wall flange sutable for 15 mm iron pipe, complete all as specified.
S&F in repair Bib Cock with Wall Flange cast copper alloy, chromium plated fency type screwed with wall flange sutable for iron pipe, 15 mm bore complete all as specified.
S&F in repair Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified.
S&F in repair Flexible tube 12 mm dia and 1.5 meater long with CP nuts cpmplete all as specified.
S&F in repair Sink Cock with Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified.
S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.
S&F in repair CP soap dish holder complete all as specified.
S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.", complete all as specified.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified.
S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge.
S&F in repair 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers (Both Side) Without Nipple (Suitable for Geysers) complete all as specified.
S&F in repair 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers) complete all as specified.
S&F in repair Overhead Shower 125 mm dia round shape single flow with shower arm , complete all as specified.
S&F in repair Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified.
S&F in repair Urinal with complete accessories Set, cp waste cuppling, waste pipe, sprader etc. Size: 375 x 390 x 590mm complete all as specified.
S&F in repair under counter basin with fixing accessories set, size: 560 x 470mm, Oval shape, including CP cuppling and PVC waste pipe complete all as specified.
S&F in repair Wall Hung Basin with Fixing Accessories Set, Size : 510 x 400mm, including cuppling and pvc waste pipe complete all as specified.
S&F in repair full pedestal for WHB complete all as specified.
S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge.
S&F in repair Vitreous china wash down water closet white colour, Size(520x360x390) with 'S' trap, closed pattern with flat bottom, including seat cover complete all as directed.
Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling .
Supply and fixing PVC Waste pipe, sutable for urinal, 50/40 mm bore for required length complete all as specified .
M&L 16 to 18 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
M&L for Reinforced cement concrete 1:2:4 (20 mm graged aggregate) (nominal mix) as in slabs supported on walls, beams and coloumns and the like slab laid in slops all as specified and directed.
S&F mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as spfd.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.
M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.
S&F in repair cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified.
S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition)
S&F in repair PVC connection 15 mm x 600 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore.
Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.
Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.
Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified
S&F in repair Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
Disconnecting of water tank of 1000 ltr capacity setting aside (or lowering if required) cleaning and removing all scale and dirt etc etc from tanks and from mouths of pipes etc. scrapping silt, scale, fungus with wire brush from water tanks and removing all scale and dirt etc from water tanks and removing water to a distance 50 meters from the building, cleaning the tank with fresh water, cleaning the mouth oh pipe, refixing all G.I fittings and float valve, making functional all out going G.I connections from tanks and float valves and marking the date of cleaning with white paint on tanks for, cleaning and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.
S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement.
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. (Sample as approved & Kept in GE's sample room)
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4. ( sample as approved & kept in GE's sample room)
Description all as item No 111 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.
Material and labour Vitrified Ceramic(Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4. (Sample as approved & Kept in GE's sample room)
Description all as item No. 113 above but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.
M&L Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in CM 1:4 all as specifid and directed
M&L Machine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc.
M&L 25 mm thick PCC 1:2:4 type B-1 using 12.50 mm stone graded aggregat as in floor finished rough complete all as specified and as directed.
Dismantling of ceiling board (Fibre, pulp, any type of insulation etc) or insulation board / slabs/any thickness including cover fillets
Supply and fixing GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engr-in- Chage.
Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 410mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.
Dismantling of AC or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering.
M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls Fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
M&L for Asbestos cement one piece plain angular ridge 6mm thick complete all as specified and as directed.
M&L Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick ( AZ-150 Micron) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) including distance pieces, cleats etcFe 410 -W (GdeE- 250) qualityA complete all as specified.
M&L Mild steel screw bolt (machine made) dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long complete all as specified.
S&F second class hard wood timber (framed) scantling fixed , wrought, complete all as specified and as directed.
M&L for 15 mm thick plaster in cm 1:4 finished fair and even on RCC roof slab ( upto 4th storey building) incl mixing of integral water proofing compound : Note :- IWPC shall be measured and paid for separately)
Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove toremove all loose dirt/dust and applying roof treatment as below:-- (i) Applying a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely. (ii) Applying a coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (iiI) Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame cpmplete all as specified.
Applying two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane.
M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.
M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).
Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement.
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified
M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified
M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.
M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.
M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of oil bound distemper on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required.
M L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.
M L for preparation of old plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.
M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.
M & L for preparation of new plastered/concrete surfaces of walls, (up to 4th storey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.
M & L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.
M & L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the Ceiling, pillars, cornices etc. complete all as specified and directed.
M & L for preparation of new wall surface , Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots & rubbing with sand paper and and applying one coat of white wash on ceiling.
M/S A TO Z ENGINEERS
M/S RAJINDER GOODS TRANSPORT CARRIER
AMRIT ENTERPRISES
M/S SINGH CONSTRUCTION AND WORKS
M/S Shankardass Devidass
M/S MANJIT SINGH AND SONS
M/S PARAMJEET SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .