15th Finance 24-25 Design, Supply, Erection, Testing and Commissioning of liquid bassed chiorine Dosing System for water supply in Sulur Town Panchayat

Amount

Supply ,Erection , Testing and Commissioning of liquid bassed Chlorine Dosing System for Water Supply under following specifications.

PREPATION TANK & STORAGE TANK TYPE: 500 LITERS, Fiber Reinforced Plastics

SIZE:(ID X HEIGHT X THK) mm: STD

LIFTING HOOK : SUITABLE LIFTING DEVICE SHALL BE PROVIDED ON SKID.

USABLE CAPACITY:PREPARATION & STORAGE :525 LTR

LIQUID / SOLUTION TO BE HANDLED: CHLORINE

MATERIAL OF CONSTRUCTION: PP/LLDPE

DESIGN PRESSURE :ATM+FULL OF LIQUID

TESTING: LEAKAGE TEST: WATER FILL UP

QUANTITY: 01 NOS.

DOSING PUMP/TRANSFER PUMP DOSING PUMP/TRANSFER PUMP

MAKE : ROTOMACK/ACL/ROTOPUMP

MODEL: MMDP-1

TYPE: MECHANICAL DIAPHRAGM TYPE

OFFERED CAPACITY :0-75 LPH

SPM/RATIO :100/15:1

DIAPHRAGM : PTFE

FLOW CONTROL: MANUALLY

TURN DOWN RATIO : 10:1

PUMP STANDARD :MFG STD

EFFICIENCY/ACCURACY :97% / +_3%

SUCTION : FLANGED TYPE

DISCHARGE PRESSURE :4.0 KG/CM2

PRV SET PRESSURE :5.0 KG/CM2

CONNECTION SUCTION :15 NB

CONNECTION DISCHARGE :15 NB

MATERIAL OF WETTED PARTS : PP

QTY :02 NOS. [ 1W + 1S ]

PUMP DRIVE MOTOR

MAKE: CGL/BBL

TYPE: SQUIRREL CAGE INDUCTION MOTOR IEC zone- IE 2

SUPPLY SYSTEM: 3 PH. INDUCTION, AC, 415V ± 10%, 50 HZ+_5%

MOUNTING/DEG PROTECTION: B 3 (FOOT MOUNTED) / IP 55

NO OF POLES/ RPM: 4 POLES /1440 RPM

INSULATION CLASS / TEMP RISE: CLASS F / LIMITED TO CLASS B

METHOED OF COOLING: TEFC

APPLICABLE STANDARDS: IS 325

RATING: 0.5 HP

MOTOR FRAME TYPE: AS PER DIN / IEC 34-7

DUTY CLASS: S1: 100% CONTINUOUS OPERATION

NOISE LEVEL(LESS THAN): 85 DB (A) AT A DISTANCE OF 1 MTR.

QTY: 02 NOS.

MOTOR -PUMP SHAFT COUPLING

MAKE: RATHI COUPLINGS/EQUIVALENT

TYPE: LOVE JOY/SUITABLE FLEXIBLE COUPLING

QTY: 01 NOS.

FITTING AS PER ANSI 16.11 B

MAKE : REPUTED & APPOVED ISO-9000 CERTIFIED SUPPLIER

TYPE: 15 NB (SW)

MATERIAL OF CONSTRUCTION : PP

FLANGES AS PER ANSI 16.5 B

SIZE: 15 NB SWRF # 150

MATERIAL OF CONSTRUCTION: PP/UPVC

INLET TERMINAL FLANGES/TANK FLANGES : 15 NB SWRF # 150

OUTLET TERMINAL FLANGES/COMPANION FLANGES: 15 NB SWRF # 150

QTY :AT ACTUAL

PULSATION DAMPNER

TYPE : VOLUME BOTTLE TYPE

CAPACITY: 1.5 LIT

MOC :PP/UPVC

QTY: 01 NOS

PRESSURE GAUGE WITH ISOLATION VALVE

MAKE : WAREE / WIKA/STD

TYPE: BOURDON SENSING TYPE

MOUNTING: DIRECT BOTTOM

DIAL SIZE :100 MM

MOC :SS

ACCURACY: 1.6%

RANGE: 0 –14 KG/CM2

QTY :01 NO

TYPE: LIFT CHECK TYPE

END CONNECTION: 15 NB SW

MOC :PP/UPVC

QTY : 01 NOS

TYPE: SPRING LOADED

CONNECTION :15NB 300#

PRV SET PRESSURE: 5.0 KG/CM2

MOC :PP/UPVC

QTY :01 NOS

STRAINER

FILTRATION RATING: 40 MESH

SIZE: 15 NB

MOC: PP/UPVC

QTY :01 NO

LEVEL GUAGE

TYPE :TRANSPARENT TUBULAR TYPE

MOC: PP

END CONNECTION: 15 NB 150# FLANGED

QTY 1 : NOS

BALL VALVE

MAKE: ASTRAL/FINOLEX/STD

TYPE: BALL VALVE FOR SUCTION & DISCHARGE

MATERIAL OF CONSTRUCTION: PP/UPVC

END CONNECTION: SW

SIZE :15 NB SW # 150

QTY: AT ACTUAL

PIPING WITHIN THE SKID

SIZE / RATING OF PIPE: 15 NB SEAMLESS SCH40/80

SUCTION MOC: PP/UPVC

DISCHARGE MOC: PP/UPVC

GASKETS

MATERIAL OF CONSTRUCTION: SPIRAL WOUND GASKET CS OUTER INNER SS

QTY :AT ACTUAL

FASTENERS

MAKE: STANDARD

MATERIAL OF CONSTRUCTION: MS GALVANISED

QTY :AT ACTUAL

SKID/BASE FRAME

BASE FRAME : A COMMON BASE FRAME FOR TANK, PUMP AND LIFTING LUGS, SUPPORTS SHALL BE PROVIDED TO AND ABOVE SCOPE OF SUPPLY

STOOL FOR PUMP: PUMP SHALL REST NOT LESS THAN 300MM

FOUNDATION BOLT: M-12 X 150 MM

MATERIAL OF CONSTRUCTION CS ( IS : 2062 )

PRIMER/ZINC RICH EPOXY FINISH/HIGHBUILT EPOXY : FRAME SHALL BE PAINTED WITH 2 COATS OF EPOXY PRIMER AND 2 COATS OF EPOXY PAINT, COLOUR - BLUE STD

AGITATOR WITH CONTROL PANEL SET : 0.5 Hp - 01 No

Hariharan R Rudra Infra Tech (BID ID -1264258)