Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.6 LAccepted-AOC | L1 | Accepted-AOC AOC PLACED ON L1 BIDDER WITH CONTRACT AGREEMENT NO GE/SHL/61 OF 2022-23 | |
| 2 | L2₹46.5 L+₹1.7 L (3.77%)Rejected-Finance C O GIVEN GOD NONGTDAU ARBUTHNOT ROAD NONGRIMMAW LAITUMKHRAH SHILLONG PIN 793011 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793011 | L2 | Rejected-Finance REJECTED BEING L2 BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SHILLONG
GE SHILLONG SHILLONG DIVISION PIN 793002
ADDN / ALTN TO KITCHEN OF BLDG NO MES 02 OF OFFRS MESS OF NCC DTE NER SHILLONG AND REPLACEMENT OF BER REFRIGERATOR WITH NEW REFRIGERATOR OF CAPACITY 165 LTR (01 NUMBERS) AT ASC (SUP) AND PROVN OF ROOM IN THE OFFICE COMPLEX OF 39 COY ASC (SUP) TYPE A
2022_MES_531513_5
GE/SHL/TOKEN-21 OF 2021-22
Open Tender
Civil Works
Works
270 days
GE SHILLONG
ALL AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
Yes
GE SHILLONG
₹80,000
Yes
21 Feb 2023
25 Oct 2022
22 Nov 2022
26 Oct 2022
21 Nov 2022
26 Oct 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specifed and as directed.
Excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft /loose soil complete all as specifed and as directed.
Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specifed and as directed.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specifed and as directed.
Rough excavation not exceeding 1.50 m deep and getting out soft/loose complete all as specified and as directed
Removing excavated material exc 500m and nexc 1.5 km depositing where directed at a level n.exc 1.50m above the starting point complete all as specifed and as directed.
M&L for earth filling under floors incl spreading, leveling in layers n.exc 25cm thick including well ramming and watering as reqd complete all as specified and directed
M&L for PCC (1:4:8) type D-2 using 40mm graded machine crushed stone aggregate as in foundation, mass concrete complete all as specifed and as directed.
M&L for RCC (1:1.5: 3) type nominal mix ( 20mm grade aggregate) foundations, including raftfs, footings , plinth beams, bases for columns etccomplete all as specifed and as directed.
M&L for RCC (1:1.5: 3) type nominal mix ( 20mm grade aggregate)columns,pillars ,piers posts and type nominal mix (1:1.5:3) (20 mm graded aggrgate) complete all as specifed and as directed.
M&L formwork to sides of plinth beams , foundations and other similar works vertical or to batter to rough finished flat surfaces of concrete complete all as specified and as directed.
M&L formwork to sides of pillars, posts,struts,pirs , coloumns and like vertical or to batter to rough finished flat surfaces of concrete complete all as specified and directed
M&L for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.
M& L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.
M&L for 75mm thick hard core of broken stone or boulders of guage not exc 63mm but n exc 40mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for 100mm thick PCC 1:3:6 type C2 ( 40mm graded aggeregate) as in subfloors finished even and rough without using extra cement complete all as specified and as directed.
M & L for 40 mm thick PCC 1:2:4 type B1(20 mm graded) as in subfloors finished even and rough without using extra cement complete all as specified and as directed.
M&L for 75 mm thick PCC (1:3:6 ) type C -2 as in Plinth protection finished even and smooth without using extra cement complete all as specified and as directed.
M&L for non skid ceramic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed
M & L for Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 , complete all as specified and as directed.
M&L for non skid ceramic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified
M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete all as specified and directed
Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and directed
M&L for providing precast cement concrete set in CM (1:4) type B1 1:2;4 (20 mm graded aggregate) in landings,cover slabs , shelves and similar articles with plain faces incl formwork complete all as directed and as specified
M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 and mixing with WPC @ of 3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed Note : WPC shall be measured and paid seperately as supply only.
Supply only Integral waterproofing compound
M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for mild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
S&F Steel work in tublar trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed
S&F iron angle for areal mast, water tank staging and the like incl caps , bases splices etc builtup from two or more beam or channel sections or angles with plates incl all lattice bars stiffers gussets etc of gde Fe-290(Gde E-165) complete all as specified and as directed
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.
S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .
M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.
S&F powder coated ( 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed
S&F powder coated ( 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified
S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified
M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.
M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.
S&F framed work such as grills/ gaurd bars gratings,etc,with ends of bar shouldered/ inserted into wooden frames to steel window and similar work Fe/290, Gde - 165 complete all as specified and directed.
M&L for preparation of new steel surfaces nexc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified and directed
S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed
M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and directed
S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed
M &L for 35mm thick of 2nd class hard wood glazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc complete all as specified and directed.
M&L for preparation of new wooden surfaces and applying two coat of synthetic enamel paint over 10 cm width or girth over a coat of pink primer complete all as specified and directed
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed
S&F aluminium anodised 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed
S&F aluminium anodised 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed
S&F aluminium cast type handles fabricated type of size 150 mm complete all as specified and directed
S&F aluminium cast type handles fabricated type of size 100 mm complete all as specified and directed
S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete all as specified and directed
S & F Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and connected Items of any description, complete all as specified and as directed.
S&F vitreous China clay wash hand basin of size 550x400mm oval shape table top incuding 32mm dia brass CP waste coupling and waste pipe complete all as specified and as directed
S&F CP over head shower dia 100mm round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system Cat part No: OHS-1989with CP shower arm dia 20 mm & 450 mm long round shape without bend for wall mounted showers with flange Cat part No: SHA-49483 or equivalent in Prayag/Hindaware/parryware complete all as specified and directed
S&F CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware complete all as specified and directed
S&F CP Hand shower 27 x 27 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera complete all as specified and directed
S&F fancy type CP single lever basin mixer without popup waste with 450mm long braided hoses of complete all as specified and directed make Jaguar Cat Part No:- KUP-35051BPM or equivalent in Marc/Parryware/Prayag
S&F Brass CP 2-in-1 Bibcock with flange of complete all as specified and directed make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware
S&F CP Soap dish holder of make Prayag Cat Part No:-BA-05 or equivalent in marc/parryware/prayag
S&F Towel ring square shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag
S&F corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag
S&F 15 mm bore CP health Faucet cock with Flexible pipe 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
S&F Toilet roll holder with stainless steel complete all as specified and as directed
S&F Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed complete all as specified and directed
S&F 15 mm bore Brass CP angular stop cock fancy type with Capstan heads fixed complete all as specified and as directed
S&F 15 mm bore Bib taps cast copper alloy with crutch or butterfly handle , screwed down for iron pipe fancy type chromium plated complete all as specified
M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed
M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed
S&F PVC (SWR) bends 110mm dia complete all as specified and as directed
S&F PVC (SWR) bends 75mm dia complete all as specified and as directed
S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed
S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed
S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.
Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.
All as per Item 79 above , but for 20mm dia (Bore).
S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed
Supply hoisting and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) of capacity 1000 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed
S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed
S&F 20 mm dia harrison rails, chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified.
S&F 20 mm dia double rod brackets stops , rollers etc wooden finished all as directed and specified.
M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and directed.
M&L for preparation of new wall surafces and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat and 1 mm thk exterior putty on new surfaces complete all as specified and directed
S & F Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware complete all as specified and directed
S&F vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware
Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed.
Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and directed.
Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed
Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and directed
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed
Taking up or down steel tubing and disconnection, for 15mm bore of pipe including cleaning for refixing or removal to store complete all as specified and directed
Taking up or down steel tubing and disconnection, for 20 mm bore of pipe including cleaning for refixing or removal to store complete all as specified and directed
M&L for Prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and directed
M & L for 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware
S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware
S & F in repairs Vitreous China urinal with fixing accessories of make Jaguar Cat Part No :- URS-WHT-132530 or equivalent in parryware , hindware
S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware
S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag
S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag
S&F in repairs CP Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag
S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag
S&Fin repairs Towel ring square shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag
S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag complete all as specified and directed
S&F in repairs 15 mm bore Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware
S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed in repairs complete all as specified and directed
M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
M& L for complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and directed.
S&F in repairs of Venetian blinds of wooden finished material width of 50 mm and thickness of 5 mm and size as per direction of Engr-in-charge
Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering all as specified.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed
Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) all as directed complete all as specified and directed.
Demolition and breaking up drain pipes 100 mmdia (salt glaged ware AC or reinforced concrete) set in cement mortar complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F 20mm thick 2nd class hard wood boarding in eaves board/fascia plained both sides with butt joints fixed with nails complete all as specified.
M&L for Machine cut kota stone slab flooring 18-20mm thick over and incl 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M&L for Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat complete all as specified.
M & L Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as spefied.
M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination as in kitchen cabinet/cup-board completed all as specified and directed.
S&F Continuous (Piano) hinges, brass, width of flaps 40 mm (when open) complete all as specified and directed
S&F Magnet catches for cupboard shutter, brass body and striking plate with 8mm dia steel ball including letting in all as specified and as directed
S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed
M&L for machine pressed pre polished chequered cement concrete tiles 20cm x20cm x 25mm thick over 15mm thick screed bed in CM 1:4 set & jointed in neat cement slurry with white cement and pigments as in floor complete all as specified
M&L 100mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) all as specified.
M&L for 25 mm thick cement concrete 1:2:4, Type B-0 (12.5mm graded aggregate) as in floor for tiles and pcc padding all as specified.
S&F PVC gutter , half round, 180mm size complete all as specified and directed.
S&F End cup support brackets for PVC pipes (half round) complete all as specified and directed.
S&F PVC Tee, 180mm complete all as specified and directed.
S&F PVC Reducer, 180mmx110mm complete all as specified and directed.
M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends
M&L for Use and waste of Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter , all as specified.
M&L Rendering 10mm thick on concrete surface of wall in CM (1:6) and finished the surface fair & even without using extra cement , complete all as specified and as directed
M&L for preparing surfaces plastered or unplastered, applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.
M&L for Complete removal of existing treatment, preparing surfaces plastered or unplastered, providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and Distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
S&F aluminium anodised barrel bolts and fixed of 200 mm length
S&F Aluminium alloy, anodised sliding door bolts(300mm long) with hasp,staples ( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified.
S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified.
S&F Stainless steel kitchen plate rack of size 31" X 30' X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack complete all as specified and directed (Make : Blue star, Cat No - BSKPR-314)
S&F in repair 15mm bore Bip tap, chromium plated, 15mm fancy type, complete all as specified and directed
S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any capacity all as specified and directed
S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed
S&F 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified
S& F 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete.
S&F in repairs Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve of dia 20 mm complete all as specified and directed by Engr-in-Charge
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including distance pieces, cleats, plates, welding/rivets/bolts etc complete all as specified.
E & M PART - II SCHUDULE Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.
Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing/ caping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .
Description all as per items No 121 above but for socket outlet point 5 Amp on same board.
Description all as per items No 121 here in before but for socket outlet point 5 Amp on Independent board.
Description all as per items No 121 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.
Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.
Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga
Description all as per Srl item No.166 above but for socket outlet point 5 Amp on same board.
Description all as per Srl item No.166 above but for socket outlet point 5 Amp on Independent board.
Description all as per serial item No 166 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.
Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.
Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.
Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay
Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .
Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay
Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .
Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all as specified and directed.
S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed
Supply and fixing LED security Building light LED 35 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.Make:- Bajaj Cat part No- 169821 LED/CG as per Cat No LSTO 25 CDL equivalent model as in Surya / havells .
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.
Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed
Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed .
S & F LED Bulk head Light fitting with lamp 12 Watt complete with necessary connection complete all as specified and directed
S & F recesss mounted low glare luminaire 28 Watt PLUTO NEO 2 X 2 complete with all accessories including complete all as specified and directed
M & L Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing etc complete all as directed.Note: (i) Two runs of 6 sqmm as pvs cable and one run of 6 sqmm as earth wire cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.
M & L Sub main wiring with two runs of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC Cassing/capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed.Note: (i) Two runs of 4 sqmm as pvc cable and one run of 4 sqmm cable as earth wire and one run of PVC casing/capping shall be measured as one RM.
Supply and fix MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting including incomer MCCB 100 AMps 4 pole complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .
Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed
Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.
Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection.
Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specified and directed
Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.
Supply and Fix refrigerator electric driven (Single Phase), Capacity 198 ltr (not less than 165 Ltrs) ,BEE 5 Star Rated Complete all as specified and directed. Make-Samsung/LG/Whirlpool
Supply and fix Switch socket combination 5/16 amp 5 in 1 universal complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all specified and directed.
S & F Wall bracket decorative LED /Mirror Light fitting /strip warm white /white type with lamp 12 Watt complete with necessary connection complete all specified and directed.
S & F Exhaust fan 230 volts , 300mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall complete all specified and directed. Make Bajaj/Havell's/CG.
Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric , hot and cold water pipe, tab etc and water connection and testing after installation complete all specified and directed. Make : Havells /LG/Ronald/Bajaj/Usha
Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed
S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size and as directed including taking down old unserviceable light fittings complete all as specified and as directed
S & F in repairs recesss mounted low glare luminaire 28 Watt PLUTO NEO 2 X 2 complete with all accessories including complete all as specified and directed
S & F in repairs Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed
Supply and fixing in repair LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.
Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.
Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and as directed
M & L for Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm as pvc cable and one run of 6 sqmm cable as earth wire and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.
S & F LED Mirror light fitting warm white /white type with lamp 12 Watt complete with necessary connection all as specified and directed
S & F Exhaust fan 230 volts , 450mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one all as specified and directed Make Bajaj/Havell's/CG.
Supply and fixing to single phase digital electronic meters with LCD Display 5-60 AmpsMake HPL/ L&T including taking down old unserviceable meters to store and including connection and complete all as specified and directed .
M & L for Sub main wiring with two runs of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm as pvc cable and one run of 4 sqmm as earth wire cable and one run of PVC casing/capping shall be measured as one RM.
M/s J. C. CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .