REPAIRS TO SANITARY FITTINGS, JOINERY AND FLOORING IN NCD, AGNIBAHU,SINGLE SAILORS BLOCK, JOC,MOC AND HQ WNC AND OTHER AREAS UNDER AGE B/R-II UNDER GE(NW) KUNJALI

Amount

Supply and fixing in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap and provision of lime concrete bedding complete all as specified and directed by Engr-in-charge

Supply and fixing Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-charge

Supply only cast iron 'P' trap 100mm bore complete all as specified and directed by Engr-in-charge

Supply and fixing 10 Ltr capacity PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle including brackets and connecting to WC complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs 10 Ltr capacity PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle including brackets and connecting to WC complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-charge

Supply and fixing in repair under counter wash hand basin vitreous china of size 605mm x 430mm x 200mm oval shape meticulously crafted from high quality materials with seamless finish white fixing with fastner/ bracket including 32mm dia brass CP waste coupling,15mm dia PVC connection with nuts and 32mm dia PVC waste pipe 90cm long and making all connections complete all as manufacturers instructions and as directed Engr-in-Charge.

Supply and fixing in repair table top thin rim wash hand basin vitreous china of size 495mm x 395mm x 150mm rectangular shape meticulously crafted from high quality materials with seamless finish white fixing including 32mm dia brass CP waste coupling,15mm dia PVC connection with nuts and 32mm dia PVC waste pipe 90cm long and making all connections complete all as manufacturers instructions and as directed Engr-in-Charge.

Supply and fixing in repair wash hand basin vitreous china white (flat back) of size 550mm x 400mm including bracket, 15mm dia PVC connection with nut, 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc complete all as specified and directed by Engr-in-charge

Supply and fixing in repair stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs 15 mm dia Pillar taps cast copper alloy CP fancy type with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs fancy type CP cock suitable for counter top wash basin 15 mm dia, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs 15 mm dia bib cock CP fancy type, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs 15 mm dia bib cock two way CP fancy type, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs angular stop cock 15 mm dia CP fancy type screwed for pipe and fixed complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs Stainless steel soap dish holder fancy type complete all as specified and directed by Engr-in-charge

Supply and fixing coner glass shelf with bracket fancy type complete all as specified and directed by Engr-in-charge

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed by Engr-in-charge

Material and labour for false ceiling work of aluminium anodized ceiling grid system conforming to designation 3600 given in IS 207-10985 including all ceiling cleats screwed with 6mm dia adjustable suspenders rod painted with two coats of synthetic enamel paint over a coat of red oxide primer, with necessary main tee, cross tee and wall angle of size 23.5x23.5x1.5mm thick and with 605mm x 605mm grid system suitable for room size complete all as specified and directed by Engr-in-charge

Supply and fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-charge

Material and labour for false ceiling made out of 600mm x 600mm x 4mm thick non asbestos fiber cement ceiliing board of approved design and colour complete all as specified and directed by Engr-in-charge

Material and labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old unserviceable false ceiling complete all as specified and directed by Engr-in-charge

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified and directed by Engr-in-charge Note: The place of disposal shall be find out by the contractor.

Material and labour for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions complete all as specified and directed by Engr-in-charge (WPC shall be measured and paid separately).

Material and labour PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) cement concrete as a leveling course/ padding on roof surfaces laid to slope and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Material and labour for preparing roof surface with water and finally remove dirt and applying water proofing treatment as per manufacturers instructions and comprises of the following activities complete all as specified and directed by Engr-in-charge:- (a) Apply one coat of bituminous primer @ 0.25 Kg per Sqm. (b) Apply evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm (c) Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm. The APP membrane shall be laid using torch application method with minimum 100 mm side overlap and 150 mm end overlap.The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. Note - (i) Irrespective of lap the net covered area shall only be measured and paid. ii) The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land complete all as specified and directed by Engr-in-charge Note: The place of disposal shall be find out by the contractor.

Material and labour for 20 mm thick Granite slab (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms, working table and like laid over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed by Engr-in-charge

Material and labour for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid over & including 20 mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishingand making 02 Nos grooves in steps complete all as specified and directed by Engr-in-charge

Material and labour for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 15 mm thick backing coat in cement mortar 1:4 including rubbing, polishing complete all as specified and directed by Engr-in-charge

Material and labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified and directed by Engr-in-charge

Material and Labour for machine pressed cheqered cement coloured tiles of size 300mm x 300mm x 20mm thick mixed with grey cement and pigment laid over and including 15mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.

Material and labour for cutting and polishing with machine the existing flooring ( kota stone,mosaic,cuddappa stone) and finally apply beeswax polish after cleaning with mild acid/detergent solution and filling/pointing the joints of tiles with white cement mixed with pigment to match the colour of tiles complete all as specified and directed by Engr-in-charge

Material and labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint including necessary scaffolding for high rise bldgs complete all as specified and directed by Engr-in-charge

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge

Material and labour for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint to external window including necessary scafolding for high rise bldgs complete all as specified and directed by Engr-in-charge

Supply and fixing powder coated aluminium sections (minimum thickness of powder coating 50 micron) for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, jointing cleats etc including all accessories such as necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading, rollers, SS screws etc including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes/ wire cloth will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately

Supply and fixing in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by as per design No DG- 102, 7.5 mm thick complete all as specified and as directed by Engr- in- charge.

Supply and fixing 4,8 mm thick sheet glass ordinary quality and glazing in squares exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified and directed by Engr-in-charge

Supply and fixing 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed by Engr-in-charge

Supply and fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed by Engr-in-charge

Supply and fixing aluminium anodized barrel tower bolts 200 mm size of extruded section and fixed complete all as specified and directed by Engr-in-charge

Supply and fixing for aluminium anodized barrel tower bolts 150 mm size of extruded section and fixed complete all as specified and directed by Engr-in-charge

Supply and fixing 150 mm size aluminium alloy handles, febricated type extruded section complete all as specified and directed by Engr-in-charge

Supply and fixing Stainless steel butt hinges 100 mm size, medium weight with SS hinge pin , bright finished complete all as specified and directed by Engr-in-charge

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and directed by Engr-in-charge Note: The place of disposal shall be find out by the contractor.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified and directed by Engr-in-charge Note: The place of disposal shall be find out by the contractor.

Material and labour for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge

Material and labour brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr-in-charge

Material and labour for rendering 15mm thick in CM 1:6 on fair surfaces of brick wall and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

Material and labour for rendering 10mm thick in CM 1:3 on fiir faces of concete surfaces in ceiling and finished even & smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 20mm thick in two coats (15mm thick inner coat 5mm thick finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in finishing coat as per manufacturer's instructions complete all as specified and directed by Engr-in-charge Note-Water proofing compound will be measured and paid for separately.

Supply only integral water proofing compound complete all as specified and directed by Engr-in-charge

Material and labour for filling holes and cracks with filling putty on wall and applying one coat of wall care putty not less than 2mm thickness and making the surface even and smooth using emery paper complete all as specified and directed by Engineer-in- Charge. .

Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-charge

Material and labour for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-charge

Material and labour for preparing new plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of self primer complete all as specified and directed by Engr-in-charge

Material and labour for preparing old decorated wall surfaces by complete removal of existing treatment by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-charge

Material and labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed by Engr-in-charge

Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed by Engr-in-charge

Material and labour preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic exterior paint (100% acrylic) complete all as specified and directed by Engr-in-charge

Dismantling floor hearth or wall tiling including cement mortar bedding / backing coat and removal of rubbish out side MD land complete all as specified and directed by Engr-in-charge Note: The place of disposal shall be find out by the contractor.

Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.09 Sqm in floor laid over and including 20mm thick screed bed or bedding layer in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified .

Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor laid over and including 20mm thick screed bed or bedding layer in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified .

Material and labour for coloured glazed ceramic tiles of size 450 x 300 x 6 to 7 mm thick as in skirting set and jointed in neat cement paste and pointed in coloured cement to match the shade including laid over and including backing coat 15 mm thick in cement mortar (1:4) complete all as specified and directed by Engr-in-charge

Material and labour for light shade double charged virified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 20mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed by Engr-in-charge

Material and labour for light shade double charged vitrified ceramic tiles as in vertical surfaces such as skirting/dado etc, 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm including 10mm thick rendering in cm (1::3) etc set and jointed in neat cement paste and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge

Supply and fixing SS grating suitable for 100/75 mm bore complete all as specified and directed by Engr-in-charge

Taking up or down existing 15 mm bore GI water tubing with all fittings complete all as specified and directed by Engr-in-charge

Taking up or down existing 20 mm bore GI water tubing with all fittings complete all as specified and directed by Engr-in-charge

Supply and fixing 15 mm bore GI tubing medium grade with all fittings like Tee, bend, elbow etc, and fixed to wall or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm bore GI tubing medium grade with all fittings like Tee, bend, elbow etc, and fixed to wall or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 15mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed to walls, celing with suitable size GI clamps or laid in floors etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed to walls, celing with suitable size GI clamps or laid in floors etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-charge

Supply and fixing 32mm dia CP waste coupling for glazed ware sinks, basin, Urinals etc with long shanks and fly, flange end complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs vitreous china urinals, bowl type , flat back, size 465X355X265mm, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern , trap and waste pipe) complete all as specified and directed by Engr-in-charge

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs complete all as specified and directed by Engr-in-charge

Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs complete all as specified and directed by Engr-in-charge

Dismantling water tank of capacity exc. 1000 Ltrs but n.exc. 2000 ltrs complete all as specified and directed by Engr-in-charge

Supply and fixing rotational moulded polythylene water storage loft tank of 300 ltr capacity including providing 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) and all connections for inlet, outlet, overflow and washout pipes etc hoisted and fixed in position all as specified in SSR Part-I complete all as specified.

Supply and fixing rotational moulded polythylene water storage loft tank of 1000 ltr capacity including providing 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) and all connections for inlet, outlet, overflow and washout pipes etc hoisted and fixed in position all as specified in SSR Part-I complete all as specified.

Supply and fixing rotational moulded polythylene water storage loft tank of 2000 ltr capacity including providing 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) and all connections for inlet, outlet, overflow and washout pipes etc hoisted and fixed in position all as specified in SSR Part-I complete all as specified.

Supply and fixing in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) complete all as specified and directed.

Supply and fixing in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.

SHRI SAI ENTERPRISES

MADHU ENTERPRIZES

SR Construction

Shree Ayyappa Engineering

Satyanarayan Trading Co.

Pragathi Infrastructure Co.

Sachin santosh dalvi