Supply and Installation of R O WATER PURIFIER SYSTEM.

Special Eligibility Criteria

1. 1

   1.a) BULK ORDER: Bulk Order (Bulk Order is defined as minimum 80 % of net procurable quantity in a tender) shall be ordered on established sources having proven past supply performance as define below. For placement of bulk quantity order, the manufacturer firm must have successfully supplied minimum 20 % (18 N o s . ) of the tendered quantity of the tendered item in a single purchase order or contract of Zonal Railways/ PUs/CORE/Govt. Department/PSUs during the period of three previous completed financial year and current financial year up to date of tender Closing. Successful supply shall mean acceptance of supply by consignee i.e. Consignee Receipt & Acceptance Certificate(CRAC) or Consignee Receipt Note (CRN) or R - N ote or Supply Performance issued by Gazetted Officer of consignee (Completion report) along with offer. 1(b)DEVELOPMENTAL ORDER ON THE BASIS OF PAST PERFORMANCE: If such past supply performance level is lower than as required for bulk order (i.e. minimum 20 %), then the offer may be considered for placement of developmental order not exceeding to 20% of the net procurable quantity. For establishing above past Supply Performance 1a & 1b above), firms should submit documentary evidence certifying proof of supply performance, which shall be scanned copies of receipt notes or inspection certificates along with self- declaration by the bidder that supply has been accepted by consignee, Furnishing of false declaration shall render termination of contract and further action as per terms and conditions of contract or Consignee Receipt & Acceptance Certificate(CRAC) or Consignee Receipt Note (CRN) or R-Note or Supply Performance issued by Gazetted Officer of consignee (Completion report) along with offer. 1(c) DEVELOPMENTAL ORDER ON THE BASIS OF OTHER CREDENTIALS: The tenderer who have no past performance as above may also be considered for such developmental order not exceeding 20 % of the net procurable quantity), but for consideration of such offers, Tenderers must be able to demonstrate their Capacity-cum-Capability to manufacture the tendered item. For this, tenderer must submit the details of M&P, testing facility, QAP and ISO 9000 /14000 / 18000 certificates if available, technical manpower available with them registration with other Government agencies or PSUs etc. or any other details as may be warranted as per the technical specification and drawing. Tenderers are to note that non submission of the documents to establish their eligibility for (1a) or (1b) or (1c) shall be taken as they are not having any such documents. Their offer shall be considered based on whatever documents are submitted by them with the offer and no back reference in this regard will be made to them.

   Document requiredConfirmation required
2. 2

   Tender Specific Authorization : OEM authorization Preferably manufacturers should participate. Participating traders/ agents must attach authorization letter issued by the original manufacturer or their authorized stockiest/ distributor/ importer along with their offer. Authorization letter should preferably be tender specific. In case of a general authorization letter, it must clearly indicate the validity period/ expiry date. Offers with general authorization letters silent on validity period/ expiry date will not be considered for placement of order. The tenderer must also attach documentary proof issued to the stockiest/ distributor/ importer by the original manufacturer. Else, offers will not be considered.

   Document requiredConfirmation required
3. 3

   ONUS OF SUBMISSION OF REQUISITE DOCUMENTS: The onus of submission of requisite documents as given above for establishing their eligibility for bulk or developmental order lies with the tenderer. Tenderers are to note that non submission of the documents as detailed above shall be taken as they are not having any such documents. In such case their offer shall be considered based on iMMS. No back reference in this regard will be made to them.
4. 4

   Place of Inspection Tenderer should mention in their offer:- 1. Name of manufacture (OEM) with complete address. 2. Place of Inspection be indicated with complete address, option for inspections at godowns/ outstation/multiple places be strictly avoided and preferably be permitted only at manufacturers place.

   Document optionalConfirmation required
5. 5

   OEM should have valid CML number for BIS Certificate 16240:2023 and submit along with offer.

   Document requiredConfirmation required
6. 6

   Firm should comply the condition for delivery and installation: All equipment should be made available at the designated location With Installation Pipariya -9 ,Madan Mahal-10, Jabalpur - 12 ,Katni - 10 , Satna -07 , Rewa - 06 ,Bargawan -07 , New Katni Junction -10 , Damoh -08, Sagar - 09, DRM Commercial office Jabalpur - 02.

   Document optionalConfirmation required
7. 7

   Bidder has to sign and submit each page of attached Annexures for Specification and Eligibility Criteria of tender schedule with seal, along with point wise compliance, failing which their offer will be ignore.

   Document requiredConfirmation required

Commercial-Compliance

1. 1

   Code of Integrity, Misdemeanor and Penalties :- I/We have carefully gone through the IRS conditions of contract(included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that none of our sister concern or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concern or affiliates including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code on Integrity in general, with specific reference to conflict of interest [Para 2502(e)], anti competitive practices[Para 2502(c)], and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation Code of Integrity, if detected, at any stage.(Note :- May confirm as Yes, to certify all the above certification.)

   Confirmation required
2. 2

   In case your confirmation in commercial compliance regarding Code of Integrity , Misdemeanor and Penalties is "No", then provide/upload the names and addresses of your sister concerns or affiliates.

   Document optional
3. 3

   IN CASE BIDDER IS INDIAN FIRM OR FROM A COUNTRY THAT DOES NOT SHARE LAND BORDER WITH INDIA, SHALL CONFIRM AS UNDER:- I have read the clauses regarding restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure F of WCRs e-TENDER DOCUMENT FOR SUPPLY CONTRACTS (Ver. 7.0, applicable w.e.f. 31.10.2022) with Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021-PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023 (copy enclosed as enclosed document) ; I certify that this bidder (in whose behalf I am submitting this bid) is not from such a country which shares a land border with India (Note:- Indian firms and firms from countries not sharing border with India, may please confirm as YES).

   Document optionalConfirmation required
4. 4

   IN CASE BIDDER FIRM IS FROM A FOREIGN COUNTRY THAT SHARES LAND BORDER WITH INDIA, SHALL SUBMIT CERTIFICATE AS UNDER:- I certify that this bidder (in whose behalf I am submitting this bid) is from such a country which shares a land border with India with regard to contents of Annexure F of WCRs e-TENDER DOCUMENT FOR SUPPLY CONTRACTS (Ver. 7.0, applicable w.e.f. 31.10.2022) with Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021- PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023; and I further certify that this bidder has been registered with the Competent Authority. I hereby further certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (Note 1; WHEREVER A BIDDER FROM SUCH A FOREIGN COUNTRY THAT SHARES BORDER WITH INDIA QUOTES, HE WILL NEED TO UPLOAD A COPY OF VALID REGISTRATION BY THE COMPETENT AUTHORITY (OR DOCUMENTARY EVIDENCE OF EXEMPTION AS PER NOTE 2 BELOW) WITHOUT WHICH THE OFFER SHALL BE SUMMARILY REJECTED.) (NOTE 2: Restrictions under this rule shall not apply to bids from such countries (even if sharing a land border in India) to which the government of India has extended lines of credit or in which the government of India is engaged in developmental projects. For updated lists of credit or in which line of credits have been extended or in which developmental projects are undertaken are given in the website of the Ministry of External affairs and in such firm will need to submit such documentary evidence.) The terms 'bidder' and 'bidder from a country which shares a land with India' shall be as defined in para II and III respectively of Annex III of Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021-PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023.

   Document required
5. 5

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   TPI
2. 2

   1.It shall be responsibility of the bidder to ensure that they quoted correct GST rate and HSN number. 2. Purchaser shall not be responsible for any misclassification of HSN code or incorrect GST rate.

   Confirmation required

1. 1

   Code of Integrity, Misdemeanor and Penalties :- Bidders are reminded to carefully go through the IRS conditions of contract (included and uploaded with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". Bidders shall certify that none of their sister concern or affiliates(such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender& which can give rise to a conflict of interest or fall under anti-competitive practices. The offers of such sister concern or affiliates if quoted are liable to be rejected as per relevant provisions of IRS terms and conditions. Bidders shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para25029(e)], anti competitive practices [Para 2502(c)] and obligations to proactive disclosures[Para 2503]. Bidders shall fully responsible for the declaration/certification regarding Code of Integrity, Misdemeanor and Penalties give in commercial compliance and it shall not be the Railways responsibility to verify the same. Bidders shall be liable for all consequences of violation of Code of Integrity (including termination of contract) as provisions in Para 2505 & 2506 of IRS conditions of contract, if detected, at any stage.