Formation of Park Near sendurpuram Murugan koil street in Kattupakkam Panchayat

1.Formation of Park Near sendurpuram Murugan koil street in Kattupakkam Panchayat

Earth work excavasion in all soil includind all cost and conveancy charges

Supplying and fixing of M sand including all cost of matrial and conveyance to site and labour charges for laying, watering and compacting etc. complete

Cement Concrete 1:4:8 using 40mm HBG metal including cost and conveyance of all materials to site and all labour charges etc. complete

RCC 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

ABOVE LEVEL

Cost towards supply centering with planks including all cost and conveyance charges

ABOVE LEVEL

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work in CM 1:5 mix using country bricks including all cost and conveyance of all materials andall labour charges etc., complete.

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER) Enamal paint

Steel Grill

Privision for Sitting Bench arrangments

Provision For Solar Light

Provision for Entrance Arch And Gate ACP sheet supply and fixing Angle including cost covenverage charges (market Rate)

Paving the floor with best approved quality flamed steel grey granite slab of size 1200 x 600 of 16/18mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone M.Sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Construction of Mini CSC toilet for Park

Earth work excavasion in all soil includind all cost and conveancy charges

Supplying and fixing of M sand including all cost of matrial and conveyance to site and labour charges for laying, watering and compacting etc. complete

Cement Concrete 1:4:8 using 40mm HBG metal including cost and conveyance of all materials to site and all labour charges etc. complete

Refilling in foundation and basement with excavated earth in layer of not more than 15cm thick

RCC 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

ABOVE LEVEL

Cost towards supply centering with planks including all cost and conveyance charges

ABOVE LEVEL

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work in CM 1:5 mix using country bricks including all cost and conveyance of all materials andall labour charges etc., complete.

ABOVE LEVEL

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Supply with putty 10mm thick including cost and conveyance and all labour charges etc.

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Cost and supply of steel door of size 1.00x2.10 including cost and conveyance of all labour charges etc completed.

Solid PVC Door shutter using 19 gauge 19mm MS Sq. tubes for styles and outer fromes 15mm MS Sq. tubes for top, l;ock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall be 50mm x 30mm. The over all size of top rails, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable srebate for housing the shutter.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Colour washing two coats with approved Distember paint inlcuding cost and conveyance and all labour charges etc,..completed..

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting with two coats over new iron work using synthetic enamel paint including all

Supply and fixing iof RCC Jollies of size 0.45 X 0.45m for individual toilet blocks inclusive of all charges for ciost of mateials etc. complete.

Supply and fixing Indian type Water Closet

European Water Closet

Plants Materials sub estimate

Pungan

Poovarasan

Manga

Golden Cypress punt sapling

Golden thuja plant sapling

Chamaedoved elegans paum Plant

china doll plant sapling

Golden duranta hedge plant

Landscapping Arrangement works

Aralia plant

Nimbu crotan Plant Sapling

Provision for Paver Block Foot Path Sub Estimate

Earth work excavasion in all soil includind all cost and conveancy charges

Supplying and fixing of M sand including all cost of matrial and conveyance to site and labour charges for laying, watering and compacting etc. complete

Cement Concrete 1:4:8 using 40mm HBG metal including cost and conveyance of all materials to site and all labour charges etc. complete

Cement Concrete 1:2:4 (One cement, Two sand, Four Hard Broken stone) using 20 mm guage machine broken hard broken granite stone jelly including cost conveyance and all labour charges etc. complete.

Supply and Errecting for Centering and shuttering for core wall sides including cost and conveyance and materials of labour charges etc,.complete.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Flooring with Paver Blocks laid as interlocking blocks inclouding cost and conveyance and other labour charges 60mm

Provision for SS hand including cost and conveyance and other labour charges

Provision for Paver Block Foot Path Sub Estimate

Swing 2 Seat

Seesaw 4 Seat

3 Slide -8’

Bridge Ladder

Four Hand Wheel Pipe size :3’ x 1’ Area Size : 4’ x 4’ Pipe Class : MS with powder coat

Hip Twister Pipe size:3’ x 1’ Area Size : 3’ x 4’ FRP sheet thickness :5 mm Pipe Class : MS with powder coat

Air Walker Pipe size :3’ x 1.5’ Area Size : 4’ x 5’ FRP sheet thickness :5 mm Pipe Class : MS with powder coat

Eliptical trainer

Air Swing or Hip shapper Pipe size :3’ x 1.5’ Area Size : 6’ x6’ FRP sheet thickness:5 mm Pipe Class : MS with powder coat

Double Shoulder Wheel Pipe size :3’ x 1’ Area Size : 4’ x 4’ Pipe Class : MS with powder coat

Horizondal Bar Set

Provision for Paver Block Foot Path Sub Estimate

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light (SD No.25)

Supply and fixing of 18W LED Round type Recessed fitting with LED (Lower end) on false Ceiling from ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting.SD-453

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC plug point (SD No.38) 5 pin plug point

Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64)

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125)

Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Please Enable Macros to View BoQ information