CO Indoor Auditorium for cultural activities at Solan SH ProvAudio System therein

Amount

Supply installation testing and commisioning of OEM supplied Black Vertical Rigging Kit for arrayable Speakers.

Supply installation testing and commisioning of flying ,Line arrayble Full Size 12", 2 Way, bi-ampable speaker . The speaker cabinet must have HF Transducer of 2 in diaphragm compression driver, frequency range of 50 Hz – 19 kHz; Frequency Response (-3 dB): 60 Hz – 16 kHz, Axial Sensitivity >= 97 dB (1W/1m), delviering Max. Calculated SPL >= 131 dB with continuous passive power handling 500W or more. The speaker should have a nominal impedance of 8 ohm .The speaker cabinet should have a Rotatable Coverage: 120° x 60° or better for better far and near field experiance.Speaker must have 20 or more suspension points for permanenet installation. Makes: d&b audiotechnik/Electro-Voice/ JBL

Supply installation testing and commisioning of flying ,Line arrayble Full Size 12", 2 Way, bi-ampable speaker . The speaker cabinet must have HF Transducer of 2 in diaphragm compression driver, frequency range of 50 Hz – 19 kHz; Frequency Response (-3 dB): 60 Hz – 16 kHz, Axial Sensitivity >= 97 dB (1W/1m), delviering Max. Calculated SPL >= 131 dB with continuous passive power handling 500W or more. The speaker should have a nominal impedance of 8 ohm .The speaker cabinet should have a Rotatable Coverage: 60° x 40° or better for better far and near field experiance.Speaker must have 20 or more suspension points for permanenet installation. Makes: d&b audiotechnik/Electro-Voice/JBL

Supply installation testing and commisioning of Dual 15" arrayble subwoofer with same footprints as Main Speaker for Arraying in the same frame, having a Freq. Range (-10 dB) of 30 Hz - 3100Hz & Freq. Response1 (-3 dB): 40 Hz - 2.5 kHz or better. It should have an axial Sensitivity of >100dB (1W/1m) or more delivering a Max. Calculated SPL of >=137 db. The loudspeaker should have a nominal impedance :4ohm and continuous Power Handling of 950W or more & a minimum of 25 M10 suspension points. Makes: d&b audiotechnik/Electro-Voice/ JBL

Supply installation testing and commisioning of OEM supplied Black Vertical Rigging Kit for arrayable subwoofers.

Supply installation testing and commisioning of 8" two-way permanent installed loudspeaker.The loudspeaker should have freqency range of 50Hz- 20kHz (-10dB),having an axial sensitivity≥93 dB SPL or more delivering a max spl of 122dB or more.The loudspeake should have a nominal impedance of 8 ohms and should have power handling pk ≥800W .The loudspeaker should have a horizontal coverage angle ≥85degree and vertical coverage angle ≥45 degree and should have rotatable horn. Makes: d&b,audiotechnik,Electro-Voice, JBL

Supply installation testing and commisioning of 5.25" two-Way Speaker with a Frequency Range(-10dB):- 62Hz-20Khz & Long Term Power Handling of>=75W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) of 90dB with a Max. SPL of >=115dB. It should have Built in LMT with Power Taps of 7.5/15/30W at70/100V Line. The Sound Dispersion should be 90x90 Degrees or better. The Speaker Should Come with OEM wall Mounting Bracket with a horizontal Sweep Range of upto 90Degrees & vertical 90degrees. Makes: d&b audiotechnik,Electro-Voice, JBL

Supply installation testing and commisioning of 12" Two-way Powered Speaker with one 1" HF transducer with a Frequency Response(-3dB):- 65Hz- 18KHz & In built class D Power amplifier of 1000 W or better. The Loudspeaker should have a Max. SPL of >=126dB.The Sound Dispersion should be 90x60 Degress. The speaker should have both built in line level inputs & multiple DSP functions. Makes: d&b audiotechnik/Electro-Voice/ JBL

Supply installation testing and commisioning of Dual channel power amplifier with inbuilt DSP, Max Midband Output Power >=950W @ 8 Ω; >=1800W @ 4 Ω & >=3200W @ 2 Ω,Max Bridged Output Power>=6000W @ 4 ohms,,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:<0.05%, Max input level >= +21 dBu, input impedence:20 kΩ, Signal to Noise ratio > = 109 dB, Crosstalk < -80 dB with built in protection such as Audio Limiters,output delay per channel,31 band GEQ per channel,PEQ per channel, Makes:Makes: d&b audiotechnik/Electro-Voice/ JBL

Supply installation testing and commisioning of Dual channel power amplifier with inbuilt DSP, Max Midband Output Power >=950W @ 8 Ω; >=1800W @ 4 Ω & >=3200W @ 2 Ω,Max Bridged Output Power>=6000W @ 4 ohms,,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:<0.05%, Max input level >= +21 dBu, input impedence:20 kΩ, Signal to Noise ratio > = 109 dB, Crosstalk < -80 dB with built in protection such as Audio Limiters,output delay per channel,31 band GEQ per channel,PEQ per channel. Makes: d&b audiotechnik/Electro-Voice/ JBL

Supply installation testing and commisioning of Dual channel power amplifier with inbuilt DSP, Max Midband Output Power >=450W @ 8 Ω; >=850W @ 4 Ω & >=1400W @ 2 Ω,Max Bridged Output Power>=2800W @ 4 ohms,,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:<0.05%, Max input level >= +21 dBu, input impedence:20 kΩ, Signal to Noise ratio > = 105 dB, Crosstalk < -80 dB with built in protection such as Audio Limiters,output delay per channel,31 band GEQ per channel,PEQ per channel. Makes: d&b audiotechnik/Electro-Voice/ JBL

Supply installation testing and commisioning of Dual Channel amplifier providing 70V/100V Rated Output Power (*Rated Load); THD<1%, 1kHz; 270W ;Rated Output Power (*Rated Load) ;THD<0.2%, 20Hz…20kHz ; 250W Slew Rate at 1kHz 41V/μs ;Frequency Response, (-1dB,). 1kHz 70Hz - 20kHz; Power Bandwidth THD=1%,Half Power : 45Hz - >20kHz;Input Impedance, 20Hz ... 20kHz, Balanced; > 20kOhm; Signal-to-Noise Ratio, A-Weighted > 101 dB Makes: d&b audiotechnik,Electro-Voice, JBL

Supply installation testing and commisioning of 16-Channel mixer with USB and SPX digital effects Featuring studio-grade discrete class-A D-PRE preamps with inverted Darlington circuit - providing fat, natural sounding bass and smooth, soaring highs, 3-band EQ and high-pass filters give you maximum control and eliminate unwanted noise, resulting in a cleaner mix, 1-Knob compressors allow easy control - resulting in livelier guitars, punchier bass lines, a tighter snare and a cleaner vocal sound, mixers feature a rugged, impact- resistant, powder-coated metal chassis Makes: d&b audiotechnik,Electro-Voice, JBL

Supply installation testing and commisioning of Corded Vocal Microphone with Dynamic Neodymium Magnet microphone element,with frequency response 80Hz-16kHz,Super-Cardioid polar pattern,sensitivity of 2.2mV/Pa and output impedence 600 ohm Makes: Clearone /EV / Audio technica

Supply installation testing and commisioning of Corded Instrument Microphone with Self Biased condensor microphone element ,with frequency response of 55Hz-16kHz ,Cardioid polar pattern,sensitivity of 5.5mV/Pa ,rated impedence of 200 ohm. Makes: Clearone /EV / Audio technica

Supply installation testing and commisioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity <1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion<1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz. Makes: Clearone /EV / Audio technica

Supply installation testing and commisioning of Wireless Lapel Mic with Cardiod polar pattern for transmitter , Receiver & Transmitter frequency response 100Hz-18kHz or better,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 5.6 mV/Pa,modulation:+/-40kHz . Makes: Clearone /EV / Audio technica

Supply and Laying of 2.5 sq.mm 2 core speaker cables including connection complete in all respect as required. Makes:Kramer/Extron/Belden/Krystal.

Supply and laying of 2 core shielded microphone cable including connection complete in all respect as required. Makes: Kramer/Extron/Belden/Krystal.

Supply, Installation, Testing & Commissioning of 37U Equipment rack complete in all respect as required. Makes: HCL/Valrack/Comrack

Supply, Installation, Testing & Commissioning of XLR wall plates / junction box for audio and microphone output to be installed flush mount on the stage complete in all respect as required.

Supply, Installation, Testing & Commissioning microphone stand three big and three small complete in all respect as required. Make GS/Ahuja/Logitech

Supply, Installation, Testing & Commissioning of connectors (xlr and speakon). complete in all respect as required. Make: Amphenol/Neutrik/Krystal

Vowels Technology and Services

Acoustic Media Solutions