REPAIR MAINT OF PLASTER CHAJJA FLOORING TANKS AND CONNECTED ITEMS IN THE AREA OF AGE BR II UNDER GE (EAST) LUCKNOW

Amount

M & L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by rubbing /scraping by sand papers, filling all the nail holes with putty and making the surface smooth after rubbing with sand paper and applying one coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed.

Description all as per Item No 01 above but on ceiling

All as per description of serial item no. 01 above but applying applying two coat of white wash on wall surfaces.

M & L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by rubbing /scraping by sand papers, filling all the nail holes with putty and making the surface smooth after rubbing with sand paper and applying one coat of colour wash on walls complete all as specified and directed.

M & L for preparation of old decorated surface of walls, cornices, pilasters etc by washing rubbing down and stopping old distempered and painted surfaces and applying one coat of oil bound distemper on walls, cornice, pilasters etc complete all as specified and directed.

M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying one coat of cement base paint on walls tinted or white including complete all as specified and directed

M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying two coat of cement base paint on walls tinted or white including complete all as specified and directed

M&L for applying two coats of oil bound distemper on old plastered surface including necessary preparation complete all as specified and directed

M&L for applying two coats of oil bound distemper over two coats of Birla white wall putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed.

M&L for preparation of old decorated plastered surface of walls, and applying one coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed

M&L for preparation of old decorated plastered surface of walls, and applying two coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Taking down cement plaster on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc but lime plaster any description complete all as specified and directed

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed

M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius in half brick thick wall, old size brick built in cement mortar 1:4 complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & chajja/roof/ceiling mixed, facia at any height with mixing of water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid seperatly.

M&L for rendering 5mm thick on concrete surfaces of ceiling in CM 1:4 complete all as specified and directed

M&L for 20 mm thick cement plaster (on roof projection, chajja's, ceiling etc.) in CM(1:3) with integral waterproofing compound, Sika Cim @ 100 gms per bag of cement over & including 1st and 2nd coats of Sika® Topseal 107, aacrylic polymer modified cementations waterproofing coating, finished the surface even and smooth without using extra cement including necessary scaffoldings upto G+2 Floor Buildings complete all as specified and directed.

M & L for 2 coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M & L for 3 coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of newly plastered surface complete all as specified and directed.

M&L for two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for RCC 1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in Chajjas/Shelves etc complete all as specified and directed.

M&L for TMT bars 6 to 8 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L for formwork to sides and soffits of concrete of roof beams, lintel beams, cantilevers, shelves, Chajjas etc complete all as specified and directed

Dismantling floor, hearth wall tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 6000X 300X 7mm thick over and including 10mm thick plaster in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected

M&L for vitrified ceramic coloured tiles light shade 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for vitrified ceramic coloured tiles light shade 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 sqm as in vertical skirting etc, set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 10mm thick rendering in CM 1:4 complete all as specified and directed

M&L for 18-20 mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for 18-20 mm thick granite for (of any type) machine cut and polished in steps, jambs, pillar window cill, cooking plateform etc laid over and including 20 mm thick screed bed in CM 1:4 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for grinding and cleaning the existing stone flooring/cladding of any description with grinder machine including filling the joints etc with white or coloured cement to match the existing surface complete all as specified and directed

Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floor sub base comoplete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified

Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridge complete all as specified and directed

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L- type or J- type or cranked hook bolts complete all as specified and directed

M&L for Asbestos cement one piece plain angular ridge 6mm thick fixed with L- type or J- type or cranked hook bolts complete all as specified and directed

S&F Pre - painted galvalume aluminum zink coating GI based corrugated steel sheeting 0.50 mm thick of an color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed

S&F rolled mild steel section as in main and cross beam, hip and jack rafters; purline where connected to common rafter and running rail and guides for sliding door;fixed with angle cleat or other connecting plates complete all as specified and directed.

Dismantling of old ceiling boards any type and any thickness including cover fillets/ aluminum snap grid complete all as specified and directed

M&L false ceiling with 4 mm thick E-board "Make-Everest" white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire complete all as specified and directed

S&F in repair 4 mm thick E-board tiles of size 600 x 600 mm (without grid work) in ceiling fixed with screw or as per manufacturer instruction all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (exc 1.5 sqm) complete all as specified and directed

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complet all as specified and directed

S&F 3 mm thick Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed

S&F in repair (including taking down from rivet, Nut & Bolt /welding / wooden beading) stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples/wooden beading/ necessary welding complete all as specified and directed

Taking down of existing hinges by welding or screw and S&F 100 mm size stainless steel butt hinges, medium weight, fixed with screw or welding complete all as specified and directed.

M & L for welding in repair exc 2.5 cm but not exc 5 cm in lengrh thickness of metal to be welded not exceed 6 mm complete all as specified and directed.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking downChowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading all as specified and directed.

S & F Aluminum anodised glazed window with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 Nos). hinges type B-21, 100mm long (2 Nos) suitable handle (1 Nos), tower bolt 150 mm long (02 Nos) including powder coated aluminum grills of aperture 75 mm and fixed in frame of window with stainless steel wiremesh including necessary fixing arrangement complete all as specified and directed

S&F in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in book shelves etc fixed with screws to steel frame work complete all as specified and directed

M&L 2nd class HW Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with screws or brads exc 13 but not exc 25 sqcm complete all as specified and directed.

M&L for in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified & directed.

S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed.

S&F ball catches with 8 mm dia steel ball and brass body and striking plate magnet ball catcher for cup board shutters complete all as specified and directed.

S & F continuous (piano) hinges mild steel bright finished or electro galvanised having 30mm width of flap when open complete all as specified and directed.

S & F brass polished 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and directed

Taking down and refixing in same opening of aluminum door shutter of area exc 1.00 sqm but not exc 2.00 sqm including necessary repair with replacement of rubber beading, and other small articles such as cleats, hinges, screws etc to make smooth functioning complete all as specified and directed

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed

S&F in repairs aluminum (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

S&F 2000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed

S&F, 500 Ltr capacity Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one all as specified and directed

S&F in repair 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections all as specified and directed

S&F 20 mm Tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed

S&F in repair vitreous China wash hand basin white size 550 x 400mm including brackets complete all as specified and directed.

S&F in repair 15mm dia spindle for bib taps, angle valve and pillar taps as required on ground complete all as specified and directed

S & F in repair 15 mm bore dia of pipe pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F in repair Waste fittings, brass, chromium plated for glazeware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ( 32mm) complete all as specified and directed

S&F in repair 32 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed

S & F in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S & F 32 mm bore Low density polyethylene rigid pipes for urinal etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed

S&F in repair vitreous china white urinals half stall type complete including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, spreader, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and directed.

S&F in repair Vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white , with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed.

S & F in repair 15 mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair Cast iron bib taps 15 mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or ferule complete all as specified and directed.

S & F in repair 15 mm bore stop valves (angle type) cast copper alloy chrominum plated fancy type screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Description all as per item no 92 above but concealed type for shower complete all as specified

S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed

S & F, in repair 15mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S & F, in repair 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S & F, in repair 25 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S&F in repair CP grating doom 100 mm dia chromium plated complete all as specified and directed.

M&L in repair CP brass soap dish fancy type best quality complete all as specified and directed

S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F in repair Brass chromium plated tubular towel rack, fancy type, exceeding 60cm long complete all as specified and directed

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and directed

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and directed

S & F in repair 75mm Bore PVC (SWR) bends any radius complete all as specified and directed

S & F in repair 110mm Bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed.

S&F in repair drapery rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads at both ends and middle support/brackets, rings etc. complete all as specified and directed.

S&F in repair cast copper alloy health faucet chromium plated with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed

S&F in repair CP brass jet spray with hand hold arrangement including 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed

S&F, glass corner self assembly, fancy type, made of 5 mm thick toughened glass of size 250x250mm, fixed with CP brackets, all as specified and directed.

S & F in repairs CP brass center hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.

S & F in repairs CP brass wall mixer with telephonic shower for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.

S&F PVC Syphon kit for cascade type vitreous china fluching cistern with dual knob complete set complete all as specified and directed

Dismantling of existing roof treatment of any description and any thickness upto PCC padding complete including removal of debris away from the site complete all as directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for PCC 1:3:6 type B-1 using 20mm graded stone aggregate as in roof padding, bed plates or mass concrete complete all as specified and directed

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof kebs or mud stops, rounded or chamfered on edges for exposed to weather and cleaning by wire brushes etc complete all as specified and directed

M&L for provn of roof treatment with polymeric water proofing membrance as under:- (a) M&L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumen primer @ 0.50 Itrs/sqmts and allow to dry. (c ) Applying one coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqmts. (d) Applying and laying polymeric water proofing membrane weight not less than 3kg/sqm. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20kg/sqm and blinding with coarse sand dry @ 0.50 to 1.00 kg/sqm dusted over bitumen.

M&L for 25cm x 25cm x 22 mm thick cement concrete tiles jointed and pointed in CM 1:4 mixed with linseed oil @ 5% by weight of cement over and including screed bed or bedding layer of mortar 15 mm thick on roof slab in CM 1:4 mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed Note: WPC Shall be measured and paid seperately.

Supply only integral water proofing compound ISI marked complete all as specified and directed

QUALITY CONSTRUCTIONS CO