Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC 300 PREM BASTI 10 SANGRUR SANGRUR PUNJAB 148001 | SANGRUR | PUNJAB | 148001 | L1 | Accepted-AOC Being Lowest bidder | |
| 2 | L2₹40.7 L+₹9.7 L (31.2%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
Refer Docs
EMD Value
₹74,480
Closing Date
21 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ANKUR LOHIYA, IDSE
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH TARAPORE ENCLAVE PATIALA CANTT
As per tender documents
2023_MES_633522_2
GE(S)/PAT/T-66/N/2023-24
Open Tender
Civil Works
Item Rate
180 days
MIL STN NABHA
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (SOUTH) PATIALA
₹74,480
Yes
30 Mar 2024
28 Feb 2024
23 Mar 2024
28 Feb 2024
21 Mar 2024
7 Mar 2024
28 Feb 2024 - 6 Mar 2024
Amount
Excavation in trenches in soft soil not exceeding 1.50 metre wide & not exceeding 1.50 metre deep for foundation ,for laying of water supply pipe line in trenches and getting out including dressing/trimming sides and levelling, grading and ramming of bottom of excavation complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, excavated soil in trenches after pipes have been laid and tested, complete all as specified and directed.
Removing excavated surplus spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.
Cutting of road /PCC path upto the depth of pipe & making good the disturbed surface with PCC 1:2:4 (20 mm aggregate) 15 cm thick using extra cement including earth work complete all as specified and directed.
M&L for trenchless drilling/excavation for laying of Pipe line 80 mm dai under road /PCC path upto the depth of 0.90 mtr complete all as specified and directed.
Taking up or down old rusted steel water GI tubing, 80 mm bore including fitting connections and cleaning tubing, fitting/ cutting threading of serviceable tubing for relaying and removal of unserviceable tubing all as directed by Engr-In- Charge. Note: (i) Excavation and earth work shall be measured and paid separately.
All as per serial item No 6 but 50 mm bore
All as per serial item No 6 but 40 mm bore
All as per serial item No 6 but 25 mm bore
All as per serial item No 6 but 20 mm bore
All as per serial item No. 6 but 15 mm bore
S & F Steel water tubing, 80 mm bore, medium grade, galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
All as per serial item No 12 but 50 mm bore
All as per serial item No 12 but 40 mm bore
All as per serial item No 12 but 25 mm bore
All as per serial item No 12 but 20 mm bore
All as per serial item No 12 but 15 mm bore
Fixing/laying only water tubing 50 mm bore fixed to walls and ceiling or laying in floors including cleaning the old pipe for reuse, with new fittings & fixtures to make it functional complete all as specified and directed. (Excavation, earth work, joints, threading & CI specials shall be measured and paid separately). Note : Old serviceable tubing as retreived under item No. 13 shall be re-used under this item.
All as per serial item No. 18 but 15 mm bore Note : Old serviceable tubing as retreived under item No. 17 shall be re-used under this item.
Supply testing and commissioning of gun metal glove or gate valve heavy duty ISI marked class-1 with iron wheel head, screwed both ends suitable for 15 mm dia complete fixed as in repairs.
All as per item No. 20 above but for 20 mm dia pipe
All as per item No. 20 above but for 25 mm dia pipe
All as per item No. 20 above but for 40 mm dia pipe
All as per item No. 20 above but for 50 mm dia pipe
All as per item No. 20 above but for 80 mm dia pipe
Taking up/out 150 mm bore old rusted GI/CI/Ductile Iron water mains including all fittings with spigot and socketed ends or flanged ends including burning out lead joints or dismantling flanged joints for pipe of following bore complete all as specified and directed. Note: (i) Excavation and earth work shall be measured and paid separately.
S&F 150 mm bore Ductile iron water pipes class K-7 conforming to IS-8329, in any length including jointing with push on rubber tyton joints, as in trenches of following bore in new or old locations of following sizes. (Excavation, earth work & DI specials shall be measured and paid separately. However, the rate of Rubber tyton joints shall be included in the unit rate quoted).
S&F DI fittings of size upto 150 mm bore for spigot and socketed pipes e.g. Bends (any type, radius and angle). Tapers any type (Straight, end, increasing, decreasing or double socket etc). Tee pieces single branch, 'Y' junctions double branches, crosses (all sockets or socket and spigot) collars caps and plugs conforming to Is complete all as specified and directed. (Excavation, earth work, & joints shall be measured and paid separately).
All as per Item Sr No. 28 but Cast Iron fittings suitable for CI pipes complete all as specified and directed.
Cutting existing CI/DI/GI pipes 150 mm bore of any description for insertion of fittings and setting the pipe in proper alignment complete all as specified and directed. (Excavation earth work and fittings shall be measured and separately).
All as per item No. 30 above but for 100 mm bore.
All as per item No. 30 above but for 80 mm bore.
All as per item No. 30 above but for 40/50 mm bore.
All as per item No. 30 above but for 15/20/25 mm bore.
Construction of brick masonary valve pit of size 1.2 x1.2 x1.2 Mtr (Internal dimension) incl necessary earth work, PCC foundation 1:3:6 a type C-1 and MS sheet 3 mm thick cover with angle iron frame 40 x 40 x 6mm including provision of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified directed.
All as per serial item No. 35 but pit size 60x60x90 Cm.
All as per serial item No. 35 but pit size 60x60x90 Cm.
S&F in replacement, Cast iron sluice valve, 80 mm dia conformig to IS-14846, PN 1.6, clockwise dosing with flanged ends and iron wheel including necessary joints by means of bolts, nuts washers and rubber gaskets complete including taking down old unserviceable sluice valve all as specified and directed.
S&F in replacement, Ductile Iron sluice valve, 150mm dia conformig to IS - 14846, PN 1.6, clockwise dosing with flanged ends and iron wheel including necessary joints by means of bolts, nuts washers and rubber gaskets complete including taking down old unserviceable sluice valve all as specified and directed.
All as per serial item No 39 but of 100 mm dia.
M& L for Drilling and tapping of GI/ CI/DI water line for branch connection of 15 mm to 150mm pipe with clamp & connected accessories complete all as specified & directed.
Taking down (NRV) Non Return Valve of 150 mm dia from existing position. Supply & Fix DI Non Return valve of 150 mm dia conforming to IS 14846 with flanged ends including necessary joints by means of bolts and nuts washers and rubber gasket complete all as specified & directed. .
M& L for painting of Iron Ladder of Over Head Tank of height 16 mtr made of Iron flat strips and steping Iron Bars including ladder guard with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note :- (i) Healthy Painter & Helper will only be deployed to perform this job only being height of 16 meter. (ii) All Safety Equipments like safety belt, helmet etc will be provided by the contractor to the painter and helper. Cost of the same will be included in the quoted rate. (iii) Note Painting work will be start from Top end of the Ladder to the Lower end of ladder at ground.
S&F MS Sheet Pit cover of 6 mm thick along with locking arrangement with hinges with handle for pulling the sheet cover to upword direction including with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
S&F Angle iron frame of size 50 mm x 6 mm, for MS Sheet Cover duly grouted in PCC 1:3:6 and masonary work on the Valve Pits including with two coats of synthetic enamel paint over a coat of red oxide primer complete all as ditected by Engr-in-Charge.
Supply connecting and testing and comissioning complete in replacement of existing unserviceable electric cable PVC insulated and PVC sheathed water proof 3 phase 3 core AC 1100 volts grade 16 sqmm starnded flat copper conductor suitable for submersible pump including making connection to pump set as well as to control panel complete including taking out old cable all as directed
S & F Automatic star delta starter panel moounting type complete3 phase 415 volt upto 35 to 40 HP capacity complete fixed as in repair all as specified directed.
S & F Water Level indicator system for OH tank (50 ft height) including connecting cable/wire binded with 3.15/4.0 mm GI/Steel wire for protection from damage in wind/strom weather Duty room to OH Tank roof (approx distance 180 mtr) all as specified & directed by Engr-in-Charge.
S& F Air termination, single pointed aluminium rod 12mm dia and 300mm long icluding cost of PCC work etc all as directed by Engr-in-Charge.
S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw
M&L for Auminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof/surface conductors and down conductors above ground suitable for Over Head water tank of size 52x52x50 feet all as dircted by Engr-in-Charge.
M&L for Eearthing in repairs complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earthpit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth strip 32x6 mm thick by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 4, connected to machinary /panel complete including PCC pit in PCC(1:3:6) type C-1, pre cast RCC (1:1-1/2:3) nominal mix cover slab reinforced with 8 mm dia mild steel TMT bars 15cm c/c and suitable handle of 10 mm dia round bar including necesary excavation earth work in soft/loose soil and disposal of soil to a distance n.exc 50m complete all as specified and as directed. Earth resistance will be measured by earth tester after completing earthing work.
Disconnecting LT Cable connection of Submersible Pump set from LT Panel/Starter. M& L for Lifting up submersible pump set of 40 HP capacity along with MS column flanged pipe 150 mm dia bore alogwith submersible cable of any size from existing bore well upto 42 mtr depth and making flanged joints after repair of column pipes and enhancement of bore well depth, Lowering of submersible pump set, LT cable, testing complete all as specified and directed by Engr-in-Charge. Note : (a) Submersible, LT Cable, column pipe to be stacked in suitable place at pump house for checking/inspection cleaning properly.
Re-Development and stabilzing of tube well in accordance with IS : 2800 (part I) and IS: 11189 , to establish maximum rate of usable water yield without sand content (beyond permissible limit), with air compressor of capacity 550 cfm at 600 PSI, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, collecting water samples & getting tested in NABL approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
Taking out Column pipe from bore well. M & L for CI column pipe in additional ISI Marked 150 mm bore size heavy duty , MS Flange Heavy Duty both ends flanged and suitable to fix as per site requirement in vertical position including lowering in tube well all jointing material flange gasket, MS Nut & Bolt with washer complete including T & P required all as specified and directed.
M&L for removing old rubber fiber board gasket, bolts, nuts etc bore of 150 mm flanged column pipes and reassembling joints of flanged pipes with new rubber or fiber board gasket, new bolts nuts & washers all as directed. byEngr-in-Charge,
Taking down old unsv CI Valve. S&F Cast Iron sluice valves ISI marked with hand wheel suitable for cast iron pipe of 150 mm bore, both ends flanged rating PN-1.6 with SS spindle as in repairs including jointing with New MS nuts and bolts, washers and gasket etc all as per IS No. 14846 and directed by Engineer in Charge.
Taking down old unserviceable non return valve of 150 mm dia from existing position and S&F Cast Iron Non Return Valve of 150 mm dia conforming to IS 14846 with flanged ends including necessary joints by means of bolts and nuts washers and rubber gasket complete all as specified & directed. .
S&F Water Submersible of capacity 40 HP, 8 Stage, 2800 rpm, 3 phase, 415 volts, 50 Hz, 109 mtr head, discharge capacity 20000 to 22000 Gallon/Hour, comissioning & testing complete all as specified and directed by Engr-in-Charge. Note :- dismantled unsv submersible will be deposited to MES being govt property.
S&F MCCB, 63/100 Amps 4 pole, with adjustable thermal magnetic setting, 415 volt breaking capacity 25 KA including taking down the old one, complete all as specified and directed.
S&F Liquid Chlorine Dosing Pump 240 volts of dosing capaicty 40 Ltr/Hr including PVC tank 100 Ltrs complete commissioning & testing including cost of suitable size (NRV) Non Return valve & connecting into 150 mm CI Pipe line etc complete all as specified and directed.
Supply and Fixing of bourdon type pressure Gauge suitable for fixing in CI Pipe 150 mm dia , span of 0-21 kg / cm , including U bend, GI Pipe and Brass valve arrangement along with pipe fitting complete in Charge.
S&F in replacement of Battery 150 Ah 12 Volts, 18 Months warranty, Model : EXIDE XPRESS XP880 150AH BATTERY or equivalent mentioned hereinafter.
Supply, laying, testing and commissioning of cable LT XLPE insulated, PVC sheathed armoured, 1.1KV grade using stranded conductor aluminium of size 70 Sqmm 3.5 core confirming to IS specification complete all as specified and as directed.
M&L for end terminal joints ( heat shrinkable) suitable for Aluminium 70 Sqmm XLPE LT PVC insulated armoured heavy duty cable incl testing after jointing.
Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable with layer of sand 8 cm before laying of cable and 15 cm thick after laying of cable completed all as specified and directed.NOTE: For payment purpose punned thickness of 18 cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR Part-I.
Supplying & laying factory made unreinforced Precasted cable cover LV type 1 Size 250x150x40mm size all as directed by Engr-in-Charge
Supply and laying GI tube 80 mm dia light grade as in cable protection pipe including all fittings & taking down / taking out from trench complete all as directed for the following sizes :- (Note :-Making good the disturbed surfaces, matching to the existing surfac included in the cost of the item.)
Supply, installing and testing of Refrigerator, electric driven 230 Volts, Single Phase, 50 Hz, Capacity 180 Litres BEE 5 star rated, energy efficient compreesor, single door type, working on R-600a or environment friendly refrigerent, Interior Lamp, Shelf Type with Toughened Glass, puf insulated body having Vegetable & Fruit Drawer, water bottle tray, top freezer complete all as specified and directed by Engr-in-Charge. (Note :- Capacity of refregerator will be enhanced if 180 Ltr not manufactured/available and quoted rate will be apllicale for the same). Make :-Godrej, Model-Jet Steel RD EDGENEO 207E THI or equivalent mentioned hereinafter.
Supply, installing and testing of Refrigerator, electric driven 230 Volts, Single Phase, 50 Hz, Capacity 310 Litres BEE 5 star rated, energy efficient compreesor, convertible technology, double door type, working on R-600a or environment friendly refrigerent, Interior Lamp, Shelf Type with Toughened Glass, puf insulated body having Vegetable & Fruit Drawer, water bottle tray, top freezer complete all as specified and directed by Engr-in-Charge. (Note :- Capacity of refregerator will be enhanced if 310 Ltr not manufactured/available and quoted rate will be apllicale for the same). Make :- LG310, Model-GLD322JPZZ or equivalent mentioned hereinafter.
Supply, installing and testing of Deep freezer, single phase 230 volts, 50 Hz, metal hard top 320 litre capacity having double door, BEE 5 Star rating, energy efficient compreesor, convertible technology, working on R-134a or environment friendly refrigerent, Interior Lamp complete all as specified and directed by Engr-in-Charge. Make :- Voltas, Model-CF HT 320 DD P or equivalent mentioned hereinafter.
Supply and fix in replacement of water cooler ,electric driven (single phase) 230 Volts, 50 Hz BEE 5 Star rating having storage capacity of 80 ltr and nominal cooling capacity 40 ltr per hour. Make :- Blue Star, 80 Ltr Storage, Model-SDLX4080B or equivalent mentioned hereinafter.
Supply and fix in replacement of water cooler ,electric driven (single phase) 230 Volts, 50 Fz, BEE 5 Star rating having storage capacity of 120 ltr and nominal cooling capacity of 60 ltr per hour. Make :- Blue Star, Model - SDLX80120B or equivalent mentioned hereinafter.
Supply and fixing in replacement of Split type Air Conditioner electric driven ,single phase of 1.5 TR Cooling and heating type Indoor & Outdoor unit, BEE 5 STAR rated. Make:- LG, Model-RS-Q19YNZE or equivalent mentioned hereinafter.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1.0 KVA all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 to 3 KVA all as specified and directed.
Supply & fix in replacement of existing unserviceable Plug & Socket Box (sheet metal) with PVC Plug, SPN 16/20 Amps. Note : (i) Including cost of masonary work involved and the disturbed surface shall be repaired/match with existing shall be part of job.
M&L for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 4 sqmm multistrand and 4 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble all as directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) If Necessary cutting chasing shall be included in this item.
M&L for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 2.5sqmm multistrand and 2.5 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble all as directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) If Necessary cutting chasing shall be included in this item.
LM CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .