Development of Mahathma Gandhi Park at Holenarasipura town

Development of Mahathma Gandhi Park at Holenarasipura town

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Page 9 Item no 5.4 PWD SR 2023-24 V-1 Issue rate wef 08.10.2025

Foundation Work Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Form Work for Foundation a) Open Foundation 4% Page no 111-5 Addendum 1 PWD SR 2023-24 V-1

Form Work for Plinth Beams a) Plinth Beam 50% Page no 111-2 Addendum 1 PWD SR 2023-24 V-1

Column Shuttering a) RCC Column 70% Page no 111-9 Addendum 1 PWD SR 2023-24 V-1

Form Work Beams a) RCC Beams, Lintels,Troughs of Aqueducts 60% Page no 112-14 Addendum 1 PWD SR 2023-24 V-1

Form Work Slab a) Curved RCC Roof Slabs, Domes & Sloped Roofs 70% Page no 112-20 Addendum 1 PWD SR 2023-24 V-1

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Internal & Celling plastering :

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, provi...

External plastering:

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement pl...

Internal painting & Ceiling Painting

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resis...

External painting:

Finishing walls with water proofing cement paint of required shade New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remov...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and Fixing of Shingles roof with necessary base preparation by screed and fixing of Shingles of approved shades / make (Saint gobain or equialent) and colour.

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...

Painting with oil type wood preservative of approved brand and manufacture 02 08 2025New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, di...

Providing fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE Thermo Plastic Elastomer) and lead free...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Wet Mix Macadam (Plant Mix Method)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Hinges 5" Heavy Duty PWD SR 2018-19 Item code 0188

Door Lock PWD SR 2018-19 Item code 0274

Powder Coated Handles PWD SR 2018-19 Item code 0178

MS Handles PWD SR 2018-19 Item code 0542

ower Bolts PWD SR 2018-19 Item code 0043

Screws PWD SR 2018-19 Item code 0125

MS Holdfasts PWD SR 2018-19 Item code 0189

Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to ...

Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and lead Page no 12, Item no 2.21 PWD SR 2023-24 V-3

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Wet Mix Macadam (Plant Mix Method)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewallsand gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of P...

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Page no 66 item no 8.10 PWD SR 2023-24 V-3

PCC for Open Foundation

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying 500x500x40 mm thick Turf paver on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick fine sand, incl...

Internal & Celling plastering :

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, provi...

Providing waterproof treatment to Raft Slab using 2 coats of acrylic co polymer elastomeric Acrylic co-polymer elastomeric sealer & protector. The surface shall be prepared free of tar, dust, fungus, ...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivo...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

PCC for Open Foundation

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Page no 9 item no 5.4 PWD SR 2023-24 V- 2 Issue rate wef date 08.10.2025

Foundation Work

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Form Work for Foundation a) Open Foundation 4% Page no 15 Item no 2.2.3 PWD SR 2023-24 V-1

Form Work for Plinth Beams a) Plinth Beam 50% Page no 15 item no 2.2.3PWD SR 2023-24 V- 1

Column Shuttering a) RCC Column 70% Page no 16 item no 2.4.3 PWD SR 2023-24 V- 1

Form Work Beams a) RCC Beams, Lintels,Troughs of Aqueducts 60% page no 16 Item no 2.4.3 and 2.6.2 PWD SR 2023-24 V-1

Work Slab a) RCC Roof Slab,chejja 50% page no 16 Item no 2.4.3 PWD SR 2023-24 V-1

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Internal & Celling plastering :

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, provi...

External plastering:

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement pl...

Internal painting & Ceiling Painting

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resis...

Finishing walls with water proofing cement paint of required shade New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dir...

Anti-skid / matt finish tile flooring for baths

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for B...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gree...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...

Painting with oil type wood preservative of approved brand and manufacture 02 08 2025New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, di...

Providing fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL9016 sections and with minimum TiO2 Titanium Dioxide) at 6PHR with TPE Thermo Plastic Elastomer and lead free wi...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

European Water Closet: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush ben...

Providing and fixing wash basin with C.I brakets, 15mm C.P, brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls ...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

SS Toilet paper holder - Economy Page no 18 Item no 883 PWD SR 2023-24 V-2

Providing and fixing 100 mm sand cast Iron grating for gully trap. Page no 136 Item no 14.29 PWD SR 2023-24 V-2

Clearing of land by cutting of thick and sparse growth plants(0.25 mt thickness plants and clearing of bushes along with roots( throwing away to 1.5mtr height and 50 mtr far) Page no 48 Item no 12.1a ...

Digging pits of size 0.75 x 0.75x 0.75m, filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion ofsand (0.035cum) FYM (0.070cum) Red earth (0.105 cum) and planting ...

Digging pits of size 0.45x0.45x0.45m filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.007), FYM (0.014cm) redearth (0.021cm) and and planting of w...

Digging pits of size 0.45x0.45x0.45m filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.007), FYM(0.014cm) redearth (0.021cm) and planting of well...

Planting of Ground cover plants

Digging of 1.0mx1.0mx0.45m areaa nd filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand (0.0375cum), FYM(0.075cum) redearth (0.01...

Rose garden/growing of rose plants

Digging pits of 0.6x0.6x0.6m size and filling 50% of the pit with top soil and remaining 50% of pit with 1:6:6 proportion of sand(0.008), FYM(0.048cm) redearth(0.048...

Digging of 1.0mx1.0mx0.45m area and filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand (0.0375cum), FYM (0.075cum), redearth (0.0112cum) and planting of well gr...

Growing of Flower Beds using corms/bulbs (Cana,Tuberose,Gladiolus etc)

Digging of 1.0mx1.0mx0.45m area and filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand (0...

Growing of Hedges

Digging trench of size 1mx0.30mx0.45m and filling 50% of the trench with top soil and remaining 50% trench with 1:2:3 proportion of sand (0.0112), FYM (0.0224cum) redearth (0.0336cum...

(Tabebuia (Pink/Yellow Trumpet), Neem, Pride of India (Lagerstroemia), Market rate (data rate)

Hibiscus, Duranta erecta, Market rate (data rate)

Pala Hibiscus rosa-sinensis (Bibiscus), Bougainviliea spp, Clerodendrum inerme, Eugenia, Market rate (data rate)

Shrubs in group planting (in the pattern of flower bed Developing the area for shrubs by digging a depth of 0.45m filling 50% of the area with excavated top soil remaining 50% with sand 0.0375 cum FYM...

Variegated Tagar, Nerium Olendar, Cestrum Nocturnum Market rate (data rate)

Canna Yellow (4 plants per sqm), Wadelia Trilbata (6 plants/sqm) Market rate (data rate)

Cost of plant (9 plants per SQM) Wedelia tribata, Chlorophytum, Petunia, Alternanthera ficoida, Portucaca grandiflora, Lantana montevidensis, Jacquemontia Market rate (data rate)

Ficus benjamina (Weeping Fig), Foxtail palm 5' Market rate (data rate)

Albizia lebbeck (Siris Tree), Albizia saman (Rain tree), Tamarindus indica (Tamarind), Delonix regia (Gulmohar), Bauhinia Variegata (Orchid Tree), Azadirachta indica (Neem) Market rate (data rate)

Areca palm 5", Polyalthia longifolia (ashoka tree) (data rate)

Plumeria alba (Frangipani), Plumuria Rubra Market rate (data rate)

SCRAPPING AND REMOVING TOP SOIL :-Scrapping the area by removing 0.15m soil and removing of unwanted plants, grass along with roots .25k minitial transport, including lead, lift loading and unloading ...

1ST DIGGING :- Digging of the area for developing lawn including removing weeds, debris if any and breaking of clumps, watering etc. (1x1x0.45mt) page no 49 item no 12.10b PWD SR 2022-23 V-8

Digging of soil by removing grass etc if any and levelling of the soil etc . (1x1x0.45mt) page no 49 item no 12.10c PWD SR 2022-23 V-8

Procurement of quality red earth/soil and heap around pit (1x1x0.15mt) page no 49 item no 12.10d PWD SR 2022-23 V-8

Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio mixing and spreading the mixture to 7.50cm thickness wherever required page no 49 item no 12.10e PWD SR 2022-23 V-8

Procurement of quality lawn grass - Bermuda Grass - (Turf) page no 49 item no 12.10g PWD SR 2022-23 V-8

mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers, digging, levelling, and dibbling with lawn grass at a spacing of 5cmx5cm & as per the direct...

Lawn development cost - Bermuda Grass - (Turf) page no 49 item no 12.10ia PWD SR 2022-23 V-8

Supply, Transportation, Installation of Mild Steel (MS) Park Benches with Nano Nano-Coated wooden Finish (Teak/Rosewood Grains). The MS benches are manufactured from mild steel. The benches are treate...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Page no 9 item no 5.4 PWD SR 2023-24 V-2 Issue rate wef date: 08.10.2025

PCC for Open Foundation

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm

nominal thickness and of approved size and as per approved pattern on steel frame work complete Page no 26 item no 7.35 PWD SR 20...

Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...

External plastering:

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement pl...

External painting:

Finishing walls with water proofing cement paint of required shade New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remov...

Supply and Fixing of Merry Go Round DX: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines The Merry go round consists o...

Supply and Fixing of 2 Seater See Saw: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines all products must be tested an...

Supply and Fixing of Fiero A Swing: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines all products must be tested and c...

Supply and Fixing of Hexa Climber: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines all products must be tested and ce...

Supply and Fixng of Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA guidelines All products must tested and certified t...

Supply and Fixng of Mini Ski: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA guidelines All products must tested and certifi...

Supply and Fixng of Self Weighted Rower: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA guidelines All products must tested ...

Supply and Fixing of Pull Down Challenger: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As oer NIUA guidelines, all products must tested ...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Open Conduit System Supplying heavy gauge PVC conduit pipe 19/20 dia 2 mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive pasteetc and fixing using inverted wood plugs in...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe.25.mm dia.2mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes, adhesive paste etc ,and running before conc...

Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm Phase Neutral 1x1.0 sqmm Earth wire FRLS multi strand PVC in...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm Phase Neutral 1x1.0 sqmm Earth wire FRLS multi strand PVC ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supply of LED Bollard light fitting of 8W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded...

Fabrication,Supplying,Erection,Testing and Commissioning of 12 m long Polygon high mast with Single /Multiple teles copic sections having, (minimum over lap distance of 1.5 times of top section)thickn...

Supply of LED flood light luminaire with pressure diecast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

LED Post Top Lantern GARDEN Supply of LED pole mounting type post top lantern with pressure diecast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare cl...

LED Post Top Lantern GARDEN Supply of LED pole mounting type post top lantern with pressure diecast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare cl...

Fabricating, supplying and erection of 3 m s long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements,...

Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fittin...

Supplying fixing flexible LED Strip Light. W Power consumption in 5ms length CCT 6500 degree K, CRI 70. efficacy 80 lumen per W,life 25000 burning hour sand Compliance to IS 10322 IEC 60598, LM 79 LM ...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers etc., complete 32 Amps (SR Item No.5.7.2 PWD ELECTRICAL Page No.14 of 105 KP...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase/3 Pha...

Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation cha...

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (75040rs/1 MT(1MT=0.001Kg) and 1KG/75.04rs )(SR Item No.8.02,Page No.5 of 81 of ESCOMS Electrical Vol 6 for 2023-24 Common SOR)

Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe.19/20.mm dia.2mm thick confirming to IS 2509 with suitable size bends,metal/PVCJunction boxes, adhesive paste etc.,and running before con...

Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe.25.mm dia.2mm thick confirming to IS 2509 with suitable size bends,metal/PVCJunction boxes, adhesive paste etc.,and running before concre...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. (SR Item No.3.7 P...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ( SR Item No.12.46 PWD ELECTRICAL Page No.52 of 105 KPTCL, ESCOMS, PWD ELECTRICAL Vol-6 for 2023-24 Common SOR)

Supply of round/square recess/surface mounted rolling type LED Down light with18 W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector has swivell...

Supplying of 4 feet PVC Batten with integrated LED tube 20 22 W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power fact...

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos ...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-1979 and with double bal...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.Electronic stepped regulator. (SR Item No. 3.14.15 PWD ELECTRICAL Page No.10 of 105 KPTCL, ESCOMS, PWD ELECTR...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers etc., complete 32 Amps (SR Item No.5.7.2 PWD ELECTRICAL Page No.14 of 105 KP...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase/3 Pha...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal Socket (SR Item No. 3.6.10 PWD ELECTRICAL Page No.9 of 105 KPT...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch (SR Item No. 3.6.1 PWD ELECTRICAL Page No.9 of 105 KPTCL, ES...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch (SR Item No. 3.6.7 PWD ELECTRICAL Page No.9 of 105 KPTCL, E...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 TV/Telephone Socket (SR Item No. 3.6.11 PWD ELECTRICAL Page No.9 of 105 KPTCL,...

Grounding of equipments including cost of 40mm dia 2.5 mm thick, class C G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation charg...

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (75040rs/1 MT(1MT=0.001Kg) and 1KG/75.04rs )(SR Item No.8.02,Page No.5 of 81 of ESCOMS Electrical Vol 6 for 2023-24 Common SOR)

Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe.19/20.mm dia.2mm thick confirming to IS 2509 with suitable size bends,metal/PVCJunction boxes, adhesive paste etc.,and running before con...

Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe.25.mm dia.2mm thick confirming to IS 2509 with suitable size bends,metal/PVCJunction boxes, adhesive paste etc.,and running before concre...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. ( SR Item No.3.7 ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ( SR Item No.12.46 PWD ELECTRICAL Page No.52 of 105 KPTCL, ESCOMS, PWD ELECTRICAL Vol-6 for 2023-24 Common SOR)

Supply of round square recess/surface mounted rolling type LED Down light with18 W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector has swivell...

Supplying of 4 feet PVC Batten with integrated LED tube 20 22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power f...

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos ...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers etc., complete 32 Amps (SR Item No.5.7.2 PWD ELECTRICAL Page No.14 of 105 KP...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase/3 Pha...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300mm)(SR No.6.2.1, PWD ELECTRICAL Page No.30 of 105 KPTCL, ESCOMS, PWD...

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal socket (SR Item No. 3.6.10 PWD ELECTRICAL Page No. 9 of 105 KP...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch (SR Item No. 3.6.1 PWD ELECTRICAL Page No. 9 of 105 KPTCL, E...

Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation cha...

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (75040rs/1 MT(1MT=0.001Kg) and 1KG/75.04rs (SR Item No.8.02,Page No.5 of 81 of ESCOMS Electrical Vol 6 for 2023-24 Common SOR)

Open Conduit System

Supplying heavy gauge PVC conduit pipe 19/20 dia 2 mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive pasteetc, and fixing using inverted wood plugs i...

Open Conduit System

Supplying heavy gauge PVC conduit pipe 25 dia 2 mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive pasteetc, and fixing using inverted wood plugs in c...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ( SR Item No.12.46 PWD ELECTRICAL Page No.52 of 105 KPTCL, ESCOMS, PWD ELECTRICAL Vol-6 for 2023-24 Common SOR)

Supply of round/square recess/surface mounted rolling type LED Down light with18 W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector has swivell...

Supply of LED Bollard light fitting of 8W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded...

LED Post Top Lantern GARDEN Supply of LED pole mounting type post top lantern with pressure diecast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare cl...

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase/3 Pha...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch (SR Item No. 3.6.1 PWD ELECTRICAL Page No.9 of 105 KPTCL, ES...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch (SR Item No. 3.6.7 PWD ELECTRICAL Page No.9 of 105 KPTCL, E...

Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation cha...

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (75040rs/1 MT(1MT=0.001Kg) and 1KG/75.04rs )(SR Item No.8.02,Page No.5 of 81 of ESCOMS Electrical Vol 6 for 2023-24 Common SOR)

Concealed Conduit System

Supplying heavy gauge PVC conduit pipe.19/20.mm dia.2mm thick confirming to IS 2509 with suitable size bends,metal/PVCJunction boxes, adhesive paste etc.,and running before co...

Concealed Conduit System

Supplying heavy gauge PVC conduit pipe.25.mm dia.2mm thick confirming to IS 2509 with suitable size bends,metal/PVCJunction boxes, adhesive paste etc.,and running before concr...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi st...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. ( SR Item No.3.7 ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ( SR Item No.12.46 PWD ELECTRICAL Page No.52 of 105 KPTCL, ESCOMS, PWD ELECTRICAL Vol-6 for 2023-24 Common SOR)

Supply of round/square recess surface mounted rolling type LED Down light with18 W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector has swivell...

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos ...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-1979 and with double bal...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers etc., complete 32 Amps (SR Item No.5.7.2 PWD ELECTRICAL Page No.14 of 105 KP...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase/3 Pha...

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase/3 Pha...

Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fittin...

Supply of 90W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal Socket (SR Item No. 3.6.10 PWD ELECTRICAL Page No.9 of 105 KPT...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch (SR Item No. 3.6.1 PWD ELECTRICAL Page No.9 of 105 KPTCL, ES...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch (SR Item No. 3.6.7 PWD ELECTRICAL Page No.9 of 105 KPTCL, E...

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.Electronic stepped regulator. (SR Item No. 3.14.15 PWD ELECTRICAL Page No.10 of 105 KPTCL, ESCOMS, PWD ELECTR...

Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation cha...

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (75040rs/1 MT(1MT=0.001Kg) and 1KG/75.04rs )(SR Item No.8.02, Page No.5 of 81 of ESCOMS Electrical Vol 6 for 2023-24 Common SOR)

Supply of LED Bollard light fitting of 8W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded...

Supply of LED flood light luminaire with pressure diecast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

Supplying and fixing of LED Bulk head of 10W with IP 65 protection and IK08 impact resistance suitable for surface and wall mounting applications. (SR Item No.11.15 PWD ELECTRICAL Page No.47 of 105 of...

Supplying fixing flexible LED Strip Light. W Power consumption in 5ms length CCT 6500 degree K, CRI 70 . efficacy 80 lumen per W,life 25000 burning hour sand Compliance to IS 10322 IEC 60598, LM 79 LM...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supply,Fixing & commissioning of Rotor pop up sprinkler full/part circle having radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top C...

Providing GM copper alloy reflex valves/ globe valves confirming to Class I and as per IS 778 1990 with latest amendments, 1 No. and with ISI mark screwed female ends confirming to IS 554 1990 horizon...

Providing GM (copper alloy) reflex valves/ globe valves confirming to Class-I and as per IS 778/1990 with latest amendments, 1 No. and with ISI mark screwed female ends confirming to IS 554/ 1990 hori...

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Page no 115 Item no 13.6.1.1 PWD SR 2023-24 V-2

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore Horizontal Page no 115 Item no 13.6.1.2.1 PWD SR 2023-24 V-2

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore Horizontal Page no 115 Item no 13.6.1.4.1 PWD SR 2023-24 V-2

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 65 mm nominal bore Horizontal Page no 115 Item no 13.6.1.5.1 PWD SR 2023-24 V-2

Supplying and fixing Wafer type single flange Butterfly valve conforming to relevant IS 13099/9991 EN GGG40/50 with latest amendments as detailed below of the following diameter and types with TP set ...

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM P...

Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. 10 to 120 HP centrifugal pump Page...

WATER BODY 1 PATHWAY 3 NOS CASCADE JET FOUNTAINS Supply installation, testing and commissioning of complete water feature pumping, piping, electrical and nozzle system, including PVC butterfly valves ...

STATUE WATER BODY 2 PATHWAY 1 NOS FOAM JET FOUNTAIN Supply installation, testing and commissioning of complete water feature pumping, piping, electrical and fountain system, including PVC Butterfly Va...

TWIN WATER BODIES DANDELION FOUNTAINS Supply installation testing and commissioning of complete water feature system, including PVC Butterfly Valve of 6 size with flanges and SS 304 fasteners of 8 len...

CASCADING WATER FALL HEMAVATI STATUE WATER FEATURE Supply, installation, testing and commissioning of complete waterfall and water feature pumping, piping and electrical system including PVC Butterfly...

NATURAL WATER BODY NE CORNER BIOPOND LIFE SUPPORT SYSTEM OF TROPICAL POND Providing, erecting, installing, testing and commissioning of complete external eco system and biopond filtration system, comp...

Electro Mechanical Works MUSICAL FOUNTAIN Providing, supplying installing, testing and commissioning of complete musical fountain system, including GI rings of 2.5 dia with crown jet nozzle assembly p...

Supply, Installation, Testing and Commissioning of VINTAGE TRAIN ON TRACK with capacity 36 Adults on 3 Coaches and Track with sleepers of length 280 meter including Transportation, Delivery at site, u...