Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹12.3 L
Closing Date
30 Oct 2026, 4:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Please follow GCC-April-2022 for Annexure-VIB. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. [NOTE: Failing of submission of Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet shall be liable for rejection.] [NOTE: Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated] through TRACES of Income Tax Department of India.]
The tenderer must have successfully completed or substantially completed any of the following during last 07(seven) years, ending last day of month previous to the one in which tender is invited: - Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR- One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (NOTE: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.) [NOTE: Failing to submit of appropriate document against the defined Similar Nature of Work issued by the competent authority shall be liable for rejection.] For details of substantially completed works IR- GCC-April-2022 or latest with all correction slips upto the date of closing of tender will be followed.
Defination of Similar Work :- Execution, commissioning, operation and maintenance of HT (from 6 KV up to 11 KV) equipment for Central Government/ State Government/ SEB's/ PSU's. OR Operation, maintenance of 6 KV/11 KV, 11KV/415 Volt, 6KV/415 Volt Substation.
38 conditions · 1 needing a document upload
Upload scanned copy, in PDF format, of the complete address of the firm, contact no. pan no., etc. in a format to which all the correspondences shall be made by the Railway.
Bidder must follow Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017. The definition and calculation of local content in accordance with the Make in India policy as approved by PCEE/ER is 50% of Minimum Local Content (MLC).
The power of attorney in the name of the person authorized to do all correspondence related to work along with resolution passed by the board of Director, affidavit stating that the tenderer is the sole proprietor of the said firm in case of proprietor firm. Copy of POA (Power of Attorney) may be attached.
Upload scanned copy, in PDF format, of any other letters/documents etc., the agency intends to submit.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case the office remains closed on the date of opening day of tender due to any unforeseen circumstances like bandh, strike, natural calamities, riot and civil commotion etc. The tender will be opened on the next working day at same time and place.
This Tender conforms to guidelines in GCC April 2022 and will be in conformity with amendment as made time to time thereafter.For any matters not specifically mentioned in this Tender Paper, the provision of General Condition of Contract (G.C.C. April 2022 or latest) for works as amended from time to time ,will govern this contract mutates mutandis.
Standard format for Guarantee Bond for security deposit is uploaded in document as ''GUARANTEE BOND FORSECURITY DEPOSIT''.
All rates of the items in the Schedules are inclusive of GST (GST Considered as 18%).The GST Act and Rules will be applicable.
For other terms and conditions with additional information, "Open E-Tender Document" uploaded herewith is to be referred.
Electrical works guideline in details will be as per "LT & HT Electrical Booklet" which has been uploaded in document separately.
LED Luminaries Specification in details will be as per "LED luminaries Specifications" which has been uploaded in document separately.
Deviations from the contract or the technical specifications if any, Railway Reserves Right to accept or reject the deviations or the offer if not acceptable without assigning any reason.
Location of Work: Wood Gola Siding of Sealdah Coaching Yard and Calcutta Goods Yard.
Sr. SEE/G/SDAH-I (IC) is the overall supervision in-charge of the work. Day to day work will be looked after by concerned sectional Sr. SEE/G or JEE/G.
This contract includes site cleaning during the time of execution of the work by the successful bidder. Noncompliance of cleaning items after the work done to a satisfactory level, Railway will impose a penalty of maximum 0.05% of the contract value apart from holding up of payments for items pertaining to cleaning of works, which will be decided by Railway authority.
Any typographical error shall not be construed to be befitting of the Contractor. In such cases the interpretation and decision of Sr. DEE/ G/ SDAH shall be final and binding up on the tenderer.
The contractor shall strictly adhere to the 'Contract Execution Timeline and Deliverables' specified under Clause 34 of the Open E-Tender Document.
i) Sealdah-Provision of Stabling Lines at Wood Gola Siding of Sealdah Coaching Yard.ii) Electrical work in connection with "SDAH-provision of 750Volt supply by Compact Substation, 01 no for NCC, 02 no for CAG to save precious diesel fuel & shifting of new sickline substation".
ELEG-OT-1340-2026-27~ER
ELEG-OT-1340-2026-27
Open
Works - General
18 Months
Kolkata, West Bengal
₹0
₹12.3 L
8 Oct 2026
8 Oct 2026
16 Oct 2026
229 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 91,48,737 | ||
| — | 400.00 | — | — | ||
| Supply o f H T XLPE insulated aluminium cable armoured of size 3 x 120mm2, 11KV grade.(Cable Make: Havells/Gloster/Polycab/RR Kabel/KEI/ Mescab/ Fort Gloster) | — | — | — | 5,27,600 | |
| — | 550.00 | — | — | ||
| Cable trenching, laying, refilling with bricks & sand, rising, jointing, socketing where necessary as per General Specification. (The cable trench should be of minimum 1000 mm depth) (L.T.Cable will be supplied by railway) | — | — | — | 68,750 | |
| — | 125.00 | — | — | ||
| Cable laying through 2" dia. GI Pipe along with supply of GI Pipe as per General Specification. (G.I. Pipe Make: TATA/ Jindal / Bansal ) (L.T.Cable will be supplied by railway) | — | — | — | 39,000 | |
| — | 75.00 | — | — | ||
| Cable laying through 3" dia. GI Pipe along with supply of GI Pipe as per General Specification. (G.I. Pipe Make: TATA/ Jindal / Bansal ) (L.T.Cable will be supplied by railway) | — | — | — | 34,050 | |
| — | 50.00 | — | — | ||
| Cable laying through 4" dia. GI Pipe along with supply of GI Pipe as per General Specification. (G.I. Pipe Make: TATA/ Jindal / Bansal ) (L.T.Cable will be supplied by railway) | — | — | — | 64,000 | |
| — | 205.00 | — | — | ||
| Drawing of L.T. cable through PF wall / Structure by cleating / clamping etc as per General Specification. (L.T.Cable will be supplied by railway) | — | — | — | 8,405 | |
| — | 155.00 | — | — | ||
| Drawing of LT cable in Concealed way through PF wall / structure / building wall etc. as per General specification. 'L' hook should be provided at approx. every half meter length.(L.T.Cable will be supplied by railway) | — | — | — | 10,850 | |
| — | 200.00 | — | — | ||
| Cable laying through pucca duct and refilling with sand and covering the duct.(L.T.Cable will be supplied by railway) | — | — | — | 15,400 | |
| — | 1000.00 | — | — | ||
| Construction of driving and reception pits to laying of 160mm dia HDPE pipes (PE80,PN6,IS:4984-1995)(with supply of HDPE pipe) by Micro-tunneling method under the road, foothpath, rail track etc. As per required depth to laying and inserting LT/HT XLPE cable of suitable size through HDPE pipes.(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/Ori Plast) (L.T.Cable will be supplied by railway) | — | — | — | 15,16,000 | |
| — | 167.00 | — | — | ||
| Butt welded joint for micro tunneling work with laying of 160 mm dia HDPE pipes.(one joint for every six mtr length) | — | — | — | 1,11,723 | |
| — | 2100.00 | — | — | ||
| Construction of driving and reception pits to laying of 110mm dia HDPE pipes (PE80,PN8,IS:4984-1995)(with supply of HDPE pipe) by Micro- tunneling method under the road, footpath, rail track etc. As per required depth to laying and inserting of LT/HT XLPE cable through HDPE pipes.(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/Ori Plast) (L.T.Cable will be supplied by railway) | — | — | — | 31,33,200 | |
| — | 350.00 | — | — | ||
| Butt welded joint for micro tunneling work with laying of 110 mm dia HDPE pipes.(one joint for every six mtr length) | — | — | — | 1,55,400 | |
| — | 1250.00 | — | — | ||
| Trenching and laying of LT cable(4-core, 50 mm² to 120 mm², 1100V grade) underground by soil cutting through 75 mm dia HDPE pipe along with supply of HDPE pipe (PE100, PN10, IS:4984), without sand and bricks including refilling of trench by excavated soil and make good of surface as its original condition, (The cable trench should be of minimum 1000 mm depth).(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/OriPlast) (L.T.Cable will be supplied by railway) | — | — | — | 3,87,500 | |
| — | 1250.00 | — | — | ||
| Trenching and laying of LT cable(4-core, 16 mm² to 35 mm², 1100V grade) underground by soil cutting through 50 mm dia HDPE pipe along with supply of HDPE pipe (PE100, PN10, IS:4984), without sand and bricks including refilling of trench by excavated soil and make good of surface as its original condition, (The cable trench should be of minimum 1000 mm depth).(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/Ori Plast) (L.T.Cable will be supplied by railway) | — | — | — | 2,50,000 | |
| — | 240.00 | — | — | ||
| Drawing of LT cable through inside of GI octagonal/tubular pole for loop in & loop out. | — | — | — | 4,320 | |
| — | 1000.00 | — | — | ||
| Supply of HDPE Role Pipe of 50mm dia (PE80,PN8,IS:4984-1995) and laying the same pipe under pathway before construction work of Pathway.(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/OriPlast) | — | — | — | 63,340 | |
| — | 5100.00 | — | — | ||
| Supply of HDPE Role Pipe of 75mm dia (PE80,PN8,IS:4984-1995) and laying the same pipe under pathway before construction work of Pathway.(HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/Ashirvad/Arpan/Ori Plast) | — | — | — | 5,90,631 | |
| — | 6100.00 | — | — | ||
| Drawing of LT cable through inside of above HDPE pipe of different size.(L.T.Cable will be supplied by railway) | — | — | — | 1,09,800 | |
| — | 2.00 | — | — | ||
| Supply,installation,testing and commissioning of indoor end jointing kit(heat shrinkable) suitable for HT XLPE insulated Al Conductor cable of size 3core, 240sq.mm, 11kV/6.6kV grade complete with all accessories along with jointing of the H.T. Cable by License holder Cable Jointer only.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 28,998 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioningof straight through cable jointing kit (heatshrinkable) suitable for HT XLPE insulated AlConductor cable of size3core,240sq.mm,11kV/6.6kV grade completewith all accessories along with jointing of theH.T. Cable by License holder Cable Jointer only.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 37,735 | |
| — | 20.00 | — | — | ||
| Supply of heat shrinkable type indoor end jointing kit suitable for XLPE insulated stranded Al. Conductor cable of size 3 core x 120mm2 11000V grade complete with all accessories along with jointing of the HT cable by License holder cable jointer only. (Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 3,25,940 | |
| — | 2.00 | — | — | ||
| Supply of Heat shrinkable type straight through cable jointing kit suitable for XLPE insulated, stranded Al, conductor cable of size 3 x 120 mm2, 11 KV / 6.6 KV grade complete with all accessories along with Jointing of the H.T. Cable by License holder Cable Jointer only.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 45,132 | |
| — | 56.00 | — | — | ||
| Jointing of LT XLPE insulated cable (4 core 240mm2 to 4 core x 300mm2, 1100V grade) using indoor/outdoor LT heat shrink end termination kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 2,19,352 | |
| — | 5.00 | — | — | ||
| Jointing of LT XLPE insulated cable (4 core x 240 to 4 core x 300mm2, 1100V grade) using LT heat shrinkable straight through jointing kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 41,320 | |
| — | 40.00 | — | — | ||
| Jointing of LT XLPE insulated cable (4 core 150mm2 to 4 core x 185mm2, 1100V grade) using indoor/outdoor LT heat shrink end termination kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 1,15,200 | |
| — | 4.00 | — | — | ||
| Jointing of LT XLPE insulated cable (4 core 150mm2 to 4 core x 185mm2, 1100V grade) using LT heat shrinkable straight through jointing kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 21,632 | |
| — | 160.00 | — | — | ||
| Jointing of LT XLPE insulated cable (4 core 70mm2 to 4 core x 120mm2, 1100V grade) using indoor/outdoor LT heat shrink end termination kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 4,38,720 | |
| — | 4.00 | — | — | ||
| Jointing of LT XLPE insulated cable (4 core 70 to 4 core x 120mm2, 1100V grade) using LT heat shrinkable straight through jointing kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 14,764 | |
| — | 5.00 | — | — | ||
| Jointing of LT XLPE insulated cable (4-core, 25mm² to 50mm², 1100V grade) using LT heat shrinkable straight-through jointing kits, including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 14,965 | |
| — | 236.00 | — | — | ||
| Jointing of LT XLPE insulated cable (4 core 25mm2 to 4 core x 50mm2, 1100V grade) using indoor/outdoor LT heat shrink end termination kit,including supply of kits complete with all accessories and execution of jointing work by a certified and licensed cable jointer.(Kit Make: Raychem RPG/Yamuna Densons/ 3M / Polycab) | — | — | — | 6,05,340 | |
| — | 192.00 | — | — | ||
| Wiring of light point with 1.5 sq.mm PVC copper wire FRLSH through PVC conduit pipefrom inside JB withporcelain fuse kit-kat / MCB of rating 16 A to top of G.I Octagonal pole 4 mt. longalong with copper ECC of size 1.5mm2 as per General specification of IE Rule. (PVC WireMake:Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab/Fort Gloster) | — | — | — | 43,968 | |
| — | 105.00 | — | — | ||
| Wiring of Light and Fan points with 1.5 sq.mm., PVC insulated 1100V grade FRLSH singlecore,M/Strand copper wire through suitable size (ISI marked) PVC conduitpipe/casing/concealed way along with ECC of 1no. 1.5 sq.mm. , PVC insulated single core, M/StrandFRLSH copper wire as per General specification of IE Rule. (PVC wire Make:Havells/Gloster/Polycab/RR Kabel/KEI/Mescab/Fort Gloster) (Switch & Plug Socket Make: Panasonic/ Anchor/GMModular/ Legrand/Crabtree/ Havells/Hager) | — | — | — | 43,260 | |
| — | 12.00 | — | — | ||
| Wiring of 6 Amp plug board consisting with one 6A plug socket and one 6 ampswitchby 2 nos. single core FRLSH grade, PVC insulated, copper conductor wire of size 1.5 mm2,1100V grade for phase and neutral alongwith 1 no. single core FRLSH grade, PVC insulated,copperconductor wire of size 1.5 mm2, 1100V grade for Earth Continuty Conductor (ECC) throughsuitablesize (ISI marked) PVC conduit pipe/casing/ concealed way as per General Specification of I.E.Rule.(PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab/ Fort Gloster) (Switch & Plug SocketMake:Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/ Havells/Hager) | — | — | — | 2,196 | |
| — | 8.00 | — | — | ||
| Wiring of 16 Amp./ 6 pin plug board consisting with one 16A plug socket and one16amp switch by 2 nos. single core FRLSH grade, PVC insulated, copper conductor wire of size 4mm2,1100V grade for phase and neutral alongwith 1 no. single core FRLSH grade, PVC insulated,copperconductor wire of size 2.5 mm2, 1100V grade for Earth Continuty Conductor (ECC) throughsuitablesize (ISI marked) PVC conduit pipe/casing/ concealed way as per General Specification of I.E.Rule.(PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab/Fort Gloster) (Switch & Plug SocketMake:Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/ Havells/Hager) | — | — | — | 4,096 | |
| — | 300.00 | — | — | ||
| Supply, laying, and termination of sub-main wiring comprising 2 run of 4mm² singlecorecopper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper EarthContinuity Conductor (ECC), through suitable size (ISI marked) PVC conduit pipe/casing/ concealedway as per General Specification of I.E. Rule.(PVC Wire Make: Havells/Gloster/ Polycab/ RR Kabel/KEI/Mescab/Fort Gloster) | — | — | — | 48,000 | |
| — | 50.00 | — | — | ||
| Supply, laying, and termination of main/sub-main wiring comprising 2 run of 6mm² multi-stranded single- core copper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper Earth Continuity Conductor (ECC), through suitable size (ISI marked) PVC conduit pipe/casing/ concealed way as per General Specification of I.E. Rule.(PVC Wire Make: Havells/Gloster/ Polycab/ RR Kabel/KEI/Mescab/Fort Gloster) | — | — | — | 8,150 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2022_CE-I_CT_GCC-2022Policy14_07_20221.pdf
ATTACHMENT
GCC-April-2022.pdf
ATTACHMENT
FormatofGuaranteeBond.pdf
ATTACHMENT
LEDluminariesSpecifications_2.pdf
ATTACHMENT
OpenTenderDocument_2.pdf
ATTACHMENT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_111.pdf Correction
ATTACHMENT
Advance
ATTACHMENT
LTHTElectricalBooklet_2.pdf
ATTACHMENT
MCCB-MCB_Specification.pdf
ATTACHMENT
2025_01_09IIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_9ACS-9.pdf
ATTACHMENT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_111.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .