REPAIR TO SUNKEN FLOORS, WALL SEEPAGE, PLUMBING AND SANITARY, FALSE CEILING, JOINERY IN NO 2 AND 3 AREA AT AIR FORCE STATION PATHANKOT

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-in-Charge.

Brick work with sub class B bricks straight or curved on plan 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

All as per item No 3 above but except bricks complete all as specified and directed by Engineer-in-Charge.

Rendering in CM (1:4) 15mm thick on brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Preparation of surfaces and applying three coats of white wash on newly plastered surfaces of wall complete all as specified and directed by Engineer-in-Charge

Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pinted in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 including dismantling existing floor tiling complete all as specified and directed by Engineer-in-Charge

All as per above item No 7 above but as in skirting on 10mm thick rendering in cement mortar 1:4 including dismantling existing wall tiles as in skirting complete all as specified and directed by Engineer-in-Charge

Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement motar 1:4 and dismantling existing wall tiling complete all as specified and directed by Engineer-in-Charge

Cement concrete 75mm thick (1:3:6) type C-2, using 40mm graded agg as in plinth protection including finishing the surfaces even and fair complete all as specified and directed by Engineer-in-Charge

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of white wash complete all as specified and directed by Engineer-in-Charge

Rendering 15mm thick in CM 1:4 on bricks / concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior emulsion paint over a coat of primer including preparation of newly plastered surfaces complete all as specified and directed by Engineer-in-Charge

Rendering 10mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement including taking down existing plaster with three coats of white wash on new undecorated surfaces of ceiling complete all as specified and directed by Engineer-in-Charge

Rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of weather proof emultion paint for facia, chajja, and roof projection etc complete all as specified and directed by Engineer-in-Charge

Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing one complete all as specified.and directed by Engineer-in-Charge

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete as specified and directed by Engineer-in-Charge

All as per Srl item No 18 above, but fixing only

Supply and fixing in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete as specified and directed by Engineer-in-Charge

All as per Srl item No 20 above, but fixing only

Cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair Vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of length up to 700 mm or as per site requirement , complete incl making good to floor all as specified and directed by Engineer-in-Charge

Supply and fixing in repair Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour,back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair Vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy to be fixed in M S brackets complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified and directed by Engineer-in-Charge

Supply and fixing in repair made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement Stainless steel plate rack of size 900mm X 900mm X 250 mm all as specified and directed by Engineer-in-Charge

Supply and fixing in repair bib taps cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15 mm dia stop valve/angle valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified and directed by Engineer-in-Charge

Supply and fixing of brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge

PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) with spout pipe 50 mm dia up to 600 mm long or as per site requirement including demolition of existing surface complete all as specified and directed by Engineer-in-Charge

Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume complete all as specified and directed by Engineer-in-Charge

Rendering of 10mm thick in CM 1:3 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair Grating round with/ without hole 100mm/75 mm size of CP complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls all as specified and directed by Engineer-in-Charge

All as above item No 39 above, before but 75mm bore.

Supply and fixing of 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge

Supply and fixing of 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 100mm bore PVC (SWR) bends copmplete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 75 mm bore PVC (SWR) bends copmplete all as specified and directed by Engineer-in-Charge

GI spout pipe medium weight 50mm bore dia of length 450mm set in PCC 1:4:8 porous concrete and make the external portion with CM 1:3 with and including water proofing @ 200 ML per bag complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each including taking out hold fast. complete all as specified and directed by Engineer-in-Charge

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as specified and directed by Engineer-in-Charge

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube all as specified, in built fixed to wall with CSK screw 100 mm long, screw holding strength of PVC frame Shall be 200 Kgf ,fixing shall be done with anchor screw ( 150 mm x 8mm) with PVC Nylone SLEEVE fixed with screw complete all as specified and directed by Engineer-in-Charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Factory made PVC flush prelaminated door shutters 28 to 32 mm thick with PVC hollow profile core with wood grain PVC sheet 5 mm thick on one side , plain PVC sheet 5 mm thick on back side complete all as specified and directed by Engineer-in-Charge

Factory made Steel window/ Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10mm sq bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick refer TD Drawing No CEAF/AR-480/2015 Sheet No 2(A)/4 dated 30.12.2015 including cutting holes and good dismantled portion in PCC(1:2:4) type B1 and match the disturbed portion with existing surface four Nos for each window including following fitting welded to frame shutter : (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf . (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, (g) Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples (h) Glass pane 3mm thick fixed with MS pin and oil putty including painting to match. (j) Including two coats of synthetic enamel paint complete. NOTE: During Fixing of window, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware, replacing bottom rail as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engineer-in-Charge

Pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats, with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fixing of 35mm thick (factory made) plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified and directed by Engineer-in-Charge

Supply and fixing of 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a). complete all as specified and directed by Engineer-in-Charge

Supply and fixing of stainless steel wire cloth 0.25mm to 0.36 nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge

Preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge

Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 33-35 mm thick (style) consisting of frame made out of mild steel tubes of size 19mm x 19 mm (19 gauge) for top and bottom rails and 19mm x 19 mm (19 gauge) in styles.Single Pieces plain coloured PVC sheets 5mm thick to be used to cover styles and rails.PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles & plain coloured PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottem rail.Panel will be wire gauges and tighten firmly and fitted as per manufactures instructions including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm and Aluminum HPM in rhombus shape, in one Piece from top rail to bottom rail complete all as specified and directed by Engineer-in-Charge.. NOTE :- All screws shall be self tapping chrome plated

Factory made solid PVC door frame single rebated of size 60 x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fixing of 18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with and including continous piano steel hinges and modular handles, design and colour as approved by GE suitable for cup board, kitchen cabinet etcincluding taking down with existing one complete all as specified and directed by Engineer-in-Charge

Supply and fixing aluminium anodised hasp and staples125 mm size including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge

Supply and fixing stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as specified and directed by Engineer-in-Charge

Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in door complete all as specified and directed by Engineer-in-Charge

Supply and fixing 3mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square nexc. 0.5 Sqm each incl hacking out old broken glass from wooden/steel frames complete all as specified and directed by Engineer-in-Charge

Supply and fixing aluminium door seal up to 1200mm length best quality complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs helical door spring 150mm size with roller and roller plates of mild steel incl welding to angle iron plate or chokhets complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs aluminium die cast body door closer hydraulically regulated design No 1 universal type suitable for door shutter ISI Marked complete all as specified and directed by Engineer-in-Charge

Supply and fixing drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and directed by Engineer-in-Charge

Dismantling wall, ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge

Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm x 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips complete all as specified and directed by Engineer-in-Charge

new hi tech engineers and contractors

DABGOTRA BUILDERS

pardeep singh marwaha

M/S HEAVEN BUILDERS AND ENGINEERS

M/S MULTI ENGINEERS

M/S SOHAL CONSTRUCTION CO