PROVISION OF RIGGING ROOM FOR NAVY BOYS SPORTS COMPLEX AT INS MANDOVI UNDER GE P NAVY

Amount

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/disintegrated rock complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc in soft/disintegrated rock complete all as specified and directed.

Removing excavated soil to a distance n exc 50mtr and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for precast PCC type C5 block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation complete as specified and directed.

M & L for Damp proof course to horizontal or vertical surfaces including necessary form works in cement concrete 1:2:4 type B0 40 mm thick complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L for hard core of gauge n exc 63mm but n exc 100mm deposited spread and levelled in layers n.exc 15 cm thick watered and rolled / rammed to a true surface with broken stone or boulders complete all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in sub base of floor 75mm thick complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles coloured 7 to 8 mm thick light shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:4 on Vertical Surface as back coat for tiling complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles coloured 7 to 8 mm thick light shade (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

S & F for MS TMT CRS bar 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips CTD bars complete all as specified and directed.

S&F for MS TMT CRS bar 5mm dia and over up to and including 10mm dia in stirrups spaces and binders complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B1 (20mm graded stone aggregate ) as beams cantilevers and lintels over 1.5m span complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B1 (20mm graded stone aggregate ) as Chajjas complete all as specified and directed.

M & L for Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, lintel blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weathering, throating etc. and setting in mortar complete with joints to match incl formwork in CM 1:6 Type B1 1:2:4 (20 mm graded stone aggregate) complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finish even & smooth without using extra cement complete all as specified and directed.

M & L for 5 mm thick plastering in cement mortar 1:3 finished even & smooth, without using extra cement on ceiling complete all as specified and directed.

M&L for rendering(10mm+5 mm) thick on fair faces of brick work or concrete surfaces in CM 1:4 in two layers on external surface even & fair and using integral water proofing compound with 5mm thick plastering complete all as specified and directed. Note- WPC shall be measured and paid separately

Supply only WPC complete all as specified and directed.

M & L for 2 coats of anti fungal acrylic emulsion exterior grade paint on newly plastered surfaces , suitable for painting on external surfaces, wall facia, cornices etc over a coat of acrylic primer in approved shade and as per manufacturers instruction & including necessary scaffolding etc complete all as specified and directed by Engineer in Charge (white & blue)

S&F aluminum powder coated window/ventilator shutter including frame , any type (sliding or open-able ) with frame , & other similar work etc fabricated by using the approved make section including necessary arrangement to receive 4mm thick sheet glass or wire mesh with aluminium channel beading, stainless steel screws, rollers, mortise lock & F frame including the cost of rubber gasket / rubber beading rollers, mortise lock & F frame etc complete . (The weight of the rubber gasket / beading rollers, mortise lock will not be measured with weight of aluminium shutter) complete all as specified and directed. Note :- Sheet glass & wire mesh shall be measured & paid separately

S&F Powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including stranded aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and directed

S&F 4 mm thick Sheet glass panel aluminium window/ventilator, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each panel complete all as specified and directed.

S&F 19 mm dia decorative aluminium anodized alloy curtain rod complete all as specified and directed.

S & F 19 mm dia decorative aluminium anodized alloy bracket for holding curtain rod complete all as specified and directed.

M&L for newly plastered surfaces preparatory to distempering, Priming plastered and other surfaces with alkali resistant priming paint, 1mm thick wall care putty & distempering walls with two coats of distemper oil emulsion, white or tinted complete all as specified and directed.

S & F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 40mm thick Plain, framed, panelled shutters (any number of panels),second class hard wood with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats 40 mm thick complete all as specified and directed.

S&F for Roof trusses (Framed steel Fe-290 Gde E-165 trusses , purlins , Crane gantries, rail and fastening and heavy bracket framing (Beam ,tee , angle , channel or flat sections) including distance pieces cleats , etc complete all as specified and directed.

S&F MS Gusset plates Fe-290 Gde E-165 ( Plain or chequered) forming holes, fixed independently complete all as specified and directed

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,( length of bolt exc 5 cm but n exc 10 cm long) dia of shank 5 to 10 mm complete all as specified and directed.

M&L for 2 coats of painting with synthetic enamel paint on new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth including preparation of new surfaces and a coat of pink primer complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described, not exceeding over 10cm width or girth including preparation of old surfaces and a coat of red oxide, zinc chrome primer complete all as specified and directed.

S & F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F 200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 125 mm Aluminium handles, cast type, anodized complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screw as specified and directed complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws as specified and directed.

M&L for concrete bed to drain pipe of 160mm dia incl packing under and hunching against the sides of pipes after they are laid and tested in cement concrete type C2 (1:3:6) complete all as specified and directed.

M&L for PVC (SWR) pipes 160mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for 12mm Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fiber fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately)

M & L for Making good under cills or over arches, lintels and bressummers. including all pinning where necessary in cement mortar 1:4 complete all as specified and directed.

M&L for 100 mm Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in levelling concrete complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M & L for Cement concrete75mm thick cement concrete type C-2 ,1:3:6 (40mm graded stone aggregate ) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M & L for screed Bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors (over plinth protection) with grey cement and no pigments complete all as specified and directed.

M & L for point wiring complete with 1100 V grade PVC insulated and unsheathed multistranded 1.5 sqmm single FRLHS core copper conductor cable drawn through and including PVC casing / caping of suitable size with all accessories including 1.5 sqmm PVC insulated and unsheathed FRLHS copper conductor cable as earth continuity wire including pressed steel terminal boxes concealed in wall with 3mm thick Hylem sheet or plastic masonite laminated sheet top cover fixed with brass screws complete all as specified and as directed, for Light / Fan point.

All as per item No 56 above but for 5 Amps switch socket combination on independent board complete all as specified and directed.

All as per item No 56 above but one 3 pin socket outlet 5/15 Amp independent / metal plug and socket with cables 2.5 sqmm size copper cable multistarnded complete all as specified and directed.

S&F ceiling rose 3 terminal PVC polycarbonate isolating body complete all as specified and directed.

Supply & Fix fan regulator electronic step type complete all as specified and directed.

Supply and fix switch piano flush type, single pole, one way 5 amp. Complete all as specified and directed.

Supply & Fix switch socket combination 2 in 1, 5 Amps flush type complete all as specified and directed.

Supply & Fix switch socket combination 2 in 1, 5A/16 Amps 5 in 1 flush type Complete all as specified and directed.

S&F LED tube light fitting 1 X 20 watt batten integrated LED channel integral sleek extruded polycarbonate LED channel with white acrylic cover along with LED tube ROD 01 No including flexible wire three core from existing ceiling rose to fitting duty mounted on PVC block with steel screw & sleeves complete all as specified and directed.

Supply and fix ceiling fans (white Colour) complete along with accessories 230V Energy efficient BEE 5 star rated, 1200mm sweep with 3 core flexible wire from ceiling fan to ceiling rose with marking of MES No. complete all as specified and directed.

Supply & Fix sheet metal enclosure for MCB's (D.B) 8 way (SPN) with 200 Amps rated bus bar double door, 240 Volts AC Complete all as specified and directed

Supply & Fix MCB 06-32 Amps 240 Volts single pole 'B' series Complete all as specified and directed.

Supply & Fix MCB two pole 230 Volts 32 Amps 'B' series Complete all as specified and directed.

Supply, lay joint test and commissioning of LT XLPE cable shielded core type wrapped with tape screwed galvanized strip armoured over all sheathed aluminium conductor cable suitable for earthed system for 1100V 2 core AC 50 cycle 10 Sqmm laying in trenches / fixed on wall with suitable clamps complete all as specified and directed by Engineer-in-charge.

M&L for earthing complete with steel earth plate electrode 60cm x 60cm x6.3mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plat not less than 1.5 mtr below ground level connected to GI earth wire of 4mm dia by means of bolts, nuts,check nuts and washers etc including protection pipe 15mm dia up to 7.5m length , provision the earth lead to earth connection in their main distribution box with lugs and GI nuts,bolts, earthing shall be done all as per shown electrical plate No 3 of SSR part 1 Including necessary excavation disintegrated hard rock filling earth of 15 mm thick and provision of earth pit, provision of 20mm dia GI funnel PCC earth chamber 100mm thick precast RCC cover with suitable precast RCC frame and earth test point and testing in presence of Engineer-in-Charge. Note : (i) GI earth wire upto 7.5 RM is included in the unit rate quoted. (ii) On Testing after Completion if the desired earth resistance is not obtained the earthing wwill be redone at no extra cost.

M/S NAGINENI RANGA RAO

Ramesh Enterprises

M/s.GOODWILL ELECTRICALS

M/S. M M S ENTERPRISES