Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | Harjit Singh Govternment Contractor L-1₹11.9 LAccepted-AOC | L-1 | Accepted-AOC L-1 SINGLE BIDDER |
Tender Value
Refer Docs
EMD Value
₹21,642
Closing Date
25 Feb 2021, 5:00 pmClosed
EE WSSD NO 3 JALANDHAR
EE WSSD NO 3 JALANDHAR
Providing Improved Access To Water Supply Scheme Shechawali MH FC Block Lohian Distt Jalandhar Under PRWSSIP 2A i JJM Project
2021_WB_60034_1
DWSS-W-DIV79-9084-1 SECHEWALI 2AI 2021
Open Tender
Civil Works
Item Rate
60 days
IN VILLAGE SECHEWALI
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
₹21,642
12 May 2021
15 Feb 2021
26 Feb 2021
15 Feb 2021
25 Feb 2021
15 Feb 2021
Amount
Providing, Fixing, Installing, Commissioning, Solar Panel Energy System (Monocrystalline) for amount of electric power required for running electric motor and other appliances such as fan, tube, Bulb etc in water works site. including Bi-directional meter and inverter of suitable capaity as per guidelines issued by PEDA complete in all respects.
Disinfection Unit Providing Installing, testing & commissioning one no. Electronically actuated, Diaphragm operated, Metering System, Chemical Dosing, Chlorinator, Suitable for delivering 0.5 to 6 Litres fo Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg. cm2 and suction lift not less than 1.5 m, as per DWSS standard specifications
Water Connection Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I. Pipe lines 15mm i/d=2.50 mtr, B-Class (above GL)Providing and fixing MDPE pipe 15mm i/d with specials = 2mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI cock 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make
Providing, Laying, Fixing and Jointing of P.V.C. Pipes as per ISI-4985 (ISI mark with the prior approval of Engineer in Charge including carriage to excauation and back filling along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. for more than 3 mtr. Street width. (Mechanically / excavation including specials) (6kgf/ cm2) Pressure
(a) PVC pipe 63mm o/d PVC 6 kg/cm2
(b) PVC pipe 90mm o/d PVC 6 kg/cm2
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) 28.27(A) Class PN-1 as per ISI
(a) 80 mm i/d Sluice Valve Flanged
Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each of Size 0.6m x 0.6m
Providing, Stringing out, cutting, Jointing and testing of ISI marked D.I. Pipe as per IS 8329 and laying the same in trenches to correct alignment and gradients,jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring. D.I. Pipe as per IS 8329 DI-K7 150mm i/d pipe line laid complete. 28.7 B (A)(c)
Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method.Including excavation , stringing and jointing of pipe upto 160mm complete
Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting and including restoration of roads to orginal Position. as per specifications PVC all o/d
Dismantling of metalled road and back filling with excavated earth, fully compacted. (Contractor shall quote rate only for the The restoration of the metalled road to its original condition will be done by the concerned department i.e. PWD B&R / PMB / Panchyati Raj) PVC pipe ALL o/d
Water Meter Providing and Fixing Multijet water meter to house hold including cost of specials such as tees, bend, socket, elbow peet valve, union, nipple and hooks etc cutting, threading and testing complete in all respect.
Painting of MS Sign Board as per standards of DWSS as per Engineer incharge complete in all respects
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .