Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical NON-RESPONSIVE |
Tender Value
₹50 L
Closing Date
19 May 2021, 4:00 pmClosed
Er. Suresh Rekhi
Office of the Deputy General Manager, JKPCC Ltd., Unit Leh.
Construction of Lavatory Block (Boys and Girls) and Canteen Blocks at GDC Nubra.
2021_PWDJK_122294_1
No 116/e-tendering/DGM/Leh of 2021-22 Dt. 10-04-21
Open Tender
Civil Works
Item Rate
180 days
NUBRA
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,500
Yes
Financial Controller, JKPCC Ltd.
Exempted
23 Jun 2021
12 Apr 2021
20 May 2021
12 Apr 2021
19 May 2021
12 Apr 2021
Amount
Lavatory Block
EXCAVATION
Earth work in excavation by manual means in trenches for foundations , cables , pipes , drains etc. over areas (not exceeding 1.5mtr in width) for shafts , wells,cesspits including dressing of sides and ramming of bottoms including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil
Providing and laying 75 mm thick compacted bed of dry brick aggregate 40mm thick nominal size including spreading , well rammed , consolidated and grouted with fine sand including finishing smooth etc . Complete as per direction of Engineer-in- charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (A) Crushed
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) (A) Crushed
Centering and Shuttering including Strutting, propping etc and removal of form for :
Walls any thickness including attached buttresses , plinth and string courses
Lintel Beams , Plinth Beams etc.
Columns, Pillars etc.
Suspended Floors,roofs,landings etc.
Steel reinforcement of high strength deformed steel bars of Fe 500D grade (conforming to IS 1786-1985) for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete, from foundation to fifth floor level.(pile reinforcement included) .Make : Tata Tiscon, Sail , Jindal Panther.
CONTROLLED CEMENT CONCRETE
Reinforced cement concrete work in beams,suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1: 1.5:3
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
BRICK MASONRY
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) of first class Kail wood.
Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, ,of first class kail wood including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazes shutters for doors and windows and celestory windows( Area of opening for pannel inserts excluding portion inside grooves to be measured) for 4mm thick glass panes
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 em), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of
20 mm thick Cement Plaster 1 : 4 (1 Cement:4 Sand)
Providing and applying white cement based putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.
Applying priming coats with primer of approved brand and manufacture having low VOC (Volatile organic Compound) content ready mixed pink or grey primer on wood work having VOC content less than 50 gms/ltr
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade . Two or more coats on new work
Finishing walls with acrylic smooth exterior paint of required shade :New work (Two or more coats applied @ 1.67 kg/10 sqm over and including primimg coat of exterior primer applied @ 2.20 kg/10sqm).
Providing and fixing 1st quality wall glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Kota stone slab 25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1 : 4 (1cement : 4 coarse sand) finished work to be measured.
Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1 : 3 (1cement : 4 coarse sand) finished work to be measured.
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps,single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: a) White Vitreous Chinawash basin size 450 x 450 mm with a pair of 15 mm CP Brass single hole basin mixer
Providing/Fixing C.P Brass bib cocks of approved Quality and weighing not less than 810 Gms 15 mm nominal bore confirming to IS : 8931
Providing/ Fixing 15 mm C.P. brass angle valve of approved make conforming to ISI: 8931. 15 mm nominal bore of approved make
Providing and fixing PTMT grating of approved quality and colour circular type 125 mm dia with 25mm waste hole
Providing and fixing 453 x 357 mm mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing / fixing of soap dish / holder, towel ring, towel hanger, toothpaste / brush holder etc. inc. cost and carriage.
a)PTMT Soap Dish
Providing and fixing of PVC connection pipe with brass union of superior quality
Providing / Fixing of G.I pipes (Prakash Surya , Jindal) quality complete with G.I fittings and clamps, including cutting and making good the walls etc 15mm dia nominal bore ( internal work) concealed
Providing / Fixing of G.I pipes (Prakash Surya , Jindal) quality complete with G.I fittings and clamps trenching and refilling etc. (external work)
Providing / Fixing of G.I pipes (Prakash Surya , Jindal) quality complete with G.I fittings and clamps, including cutting and making good the walls etc 20mm dia nominal bore
Providing andd fixing of G.I union in G.I pipe including cutting and threading the pipe and making new screws etc . Complete ( new Work ) nominal bore
Providing and placing on terrace , polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including necessary fittings [Sintex, Electroplate, Star, Lotus or equivalent having valid lSI license].
Providing and fixing of PVC pipe of superior quality
Providing and fixing PVC fittings and accessories inc. cost and carriage, all complete :
Plain Bend 100 mm dia
Plain bend 75 mm dia
Providing and fixing of Floor trap of approved quality 75 mm
Providing and fixing of door junction of PVC 100 mm
Carriage of Stone aggregate from source to site of work for 3 kms
Carriage of sand from source to sight of work
Internal Electrification Work
SUB HEAD-1 WIRING
Wiring for switch controlled primary light points with 1.5 sq mm FRLS PVC insulated stranded copper conductor 1100 volt grade wires in PVC surface/concealed conduit including cost of providing saddles etc for surface conduiting and/or cost of cutting and filling chases for recessed conduiting and including the cost of providing and fixing a 6 Amp 240 volt grid plate mounted modular switch with modular cover plate in zinc chromate passivated MS box and including the cost of running 1.5 sqmm PVC insulated stranded copper conductor wire for loop earthing complete as per specifications ( Make Havells)
Light Points ( LED)
Indivcator Lamp
Providing,transportation and fixing of 6 Amp 3/5 pin modular socket/switch on the existing modular plate & switch box excluding modular plate as required.
Providing and fixing of following size modular blanking plate on existing modular plate & switch box excluding modular plate as required.
Two Module
Four Module
Providing and fixing of following size modular cover plate on existing modular metal boxes etc. as required. 4 module
Providing and fixing of main control accessories
MCB 16 amp
MCB 63 amp
MCB Distribution board 4 way
Wiring for circuits/submains with FRLS PVC insulated stranded copper conductor 1100 volt grade wires in surface/concealed conduit and including FR PVC insulated copper wire for earthing and making suitable end connections complete as required and as below.
2 X 2.5 sq.mm
2 X 1 sq. mm
Canteen Block
EXCAVATION
Earth work in excavation by manual means in trenches for foundations , cables , pipes , drains etc. over areas (not exceeding 1.5mtr in width) for shafts , wells,cesspits including dressing of sides and ramming of bottoms including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (A) Crushed
Random Rubble masonry with ~ard stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with 1:6(1 Cement : 6 Fine Aggregate) with curing complete
Centering and Shuttering including Strutting, propping etc and removal of form for :
Lintel Beams , Plinth Beams etc.
Columns, Pillars etc.
Suspended Floors,roofs,landings etc.
Steel reinforcement of high strength deformed steel bars of Fe 500D grade (conforming to IS 1786-1985) for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete, from foundation to fifth floor level.(pile reinforcement included) .Make : Tata Tiscon, Sail , Jindal Panther.
CONTROLLED CEMENT CONCRETE
Reinforced cement concrete work in beams,suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1: 1.5:3
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
BRICK MASONRY
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) of first class Kail wood.
Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, ,of first class kail wood including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazes shutters for doors and windows and celestory windows( Area of opening for pannel inserts excluding portion inside grooves to be measured) for 4mm thick glass panes
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 em), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer I/c
Providing 20 mm thick Cement Plaster 1 : 4 (1 Cement:4 Sand) Internal and External complete job
Providing and applying white cement based putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.
Applying priming coats with primer of approved brand and manufacture having low VOC (Volatile organic Compound) content ready mixed pink or grey primer on wood work having VOC content less than 50 gms/ltr
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade . Two or more coats on new work
Finishing walls with acrylic smooth exterior paint of required shade :New work (Two or more coats applied @ 1.67 kg/10 sqm over and including primimg coat of exterior primer applied @ 2.20 kg/10sqm).
Providing and fixing glass strips in joints of Cement Concrete Floor of 4mm
Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.
Providing and fixing of local type Shingsak over windows
Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of approved quality and shade
Providing and fixing 1st quality wall glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing of cupboard shutters 25mm thick with prelaminated flat pressed three layer particle board or graded wood particle board IS 12823 marked exterior grade ( grade 1) type 2 having one side decorative lamination and other side a balancing lamination including second class teak wood lippinhg of 25mm x 12mm thick with necessory screws and bright finished stainless steel paino hinges compltete as per directions of Engineer in Charge.
Providing and fixing Sainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:
Providing and fixing of PVC waste pipe for sinks and wash basin including PVC waste fittings complete 32mm dia
Providing and fixing PTMT grating of approved quality and colour circular type 125 mm dia with 25mm waste hole
Providing / Fixing of G.I pipes (Prakash Surya , Jindal) quality complete with G.I fittings and clamps, including cutting and making good the walls etc 15mm dia nominal bore ( internal work) concealed
Providing / Fixing of G.I pipes (Prakash Surya , Jindal) quality complete with G.I fittings and clamps trenching and refilling etc. (external work)
Providing andd fixing of G.I union in G.I pipe including cutting and threading the pipe and making new screws etc . Complete ( new Work ) nominal bore
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. a) 15 mm nominal bore
Providing and placing on terrace , polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including necessary fittings [Sintex, Electroplate, Star, Lotus or equivalent having valid lSI license].
Providing and fixing of PVC pipe of superior quality
Providing and fixing PVC fittings and accessories inc. cost and carriage, all complete :
Plain bend 75 mm dia
Making soak pit 2.5 m diameter 3.0 metre deep with45x45 em dry brick honey comb shaft with bricks of class designation 7.5 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
Carriage of Stone aggregate from source to site of work for 3 kms
Carriage of Stone from source to site of work for 20 kms
Carriage of sand from source to Site of work for 3 kms
Internal Electrification Work
SUB HEAD-1 WIRING
Wiring for switch controlled primary light points with 1.5 sq mm FRLS PVC insulated stranded copper conductor 1100 volt grade wires in PVC surface/concealed conduit including cost of providing saddles etc for surface conduiting and/or cost of cutting and filling chases for recessed conduiting and including the cost of providing and fixing a 6 Amp 240 volt grid plate mounted modular switch with modular cover plate in zinc chromate passivated MS box and including the cost of running 1.5 sqmm PVC insulated stranded copper conductor wire for loop earthing complete as per specifications ( Make Havells)
Light Points ( LED)
Indivcator Lamp
6 Amp / 3 Socket
Providing and fixing of 4 sqm multi standard copper conductor of grade 250 made with PVC channels pipes andjunctions and other accessories complee 3 pin power socket,
providing and fixing of batten holder ceiling rose including LED Bulbs
Providing and fixing of 16 amp pin power socket with switch of grade 250 v with fixing hole
Providing and fixing of main control Accessories
MCB 6 Amp Switch SP
MCB 16 Amp Switvch SP
MCB distribution Board 5 Way Single Door
Providing and fixing of 25 sqmm Cable
Providing and fixing of iron box with sheet of same size including cutting of holes for switch boards
tsewang dorjay
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .