Construction of Entrance Gate, Compound wall and toilet block with outer development near Gangeshwar Temple, Diu

1.EARTHWORK-Providing material and labour for excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering.

Supplying,Stacking at site and Laying stone soling including packing with smaller stone and consolidation with road roller including spreading and consolidation of blinding material, moorum, earth filling and laying to template, (payment to be made for quantity of only stone soling used excluding blinding material etc.)

Providing and applying Antitermite treatement by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatement and creating a chemical barrier as per IS 6313 (Part ll) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building,etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge.(Plinth area only to be measured for the payment ) (The above work shall be carriedout by an agency having sufficient experience and should ensure a warranty for a periRA of 10 years. Only skilled and experienced persons shall be employed for this purpose.)

2.CONCRETE WORKS-Providing and laying cement concrete 1:4:8 (1- Cement :4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

3.REINFORCED CEMENT CONCRETE WORKS-Providing material and labour for laying in position Ready Mixed M-30 grade concrete/ batch mix concrete for reinforced cement conctere work, using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work excluding any type of form work, pumping of R.M.C. from transit mixer to site of laying, cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability; finishing, compacting, vibrating, curing etc for all elements, all floors, any heights/depths, any lead and lift but excluding the cost of reinforcement as directed by Engineer Incharge.

Providing, hoisting and fixing up to floor five level precast reinforced cement concrete design mix M30 gradefor reinforced cement concrete work, using cement content as per approved design mix for slabs/beam exceeding 1.5 m clear span up to floor five level, including the cost of required centering, shuttering but including the cost of reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 350 kg/ cum.

4. FORMWORK-Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (1) Edges of slabs and Breaks in floors and walls.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1M. in Depth.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including attached buttresses & string course & the like.

5.STEEL-ProvidingTMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level

Providing fusion bonded Epoxy coating not less than 175 micron thickness and upto 300 micron to reinforcement bars of any diameteer as per IS-13620-1993/ ASTM-775 M including testing of coating at plant and all taxes etc complete as directed by engineer ion charge.

6. MASONRY WORK-Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above plinth level upto floor two level in cement mortar 1:5 ( 1cement : 5 fine sand ) complete as per Technical Specification

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

7. JOINERY WORKS-Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable woRAen block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.The Frame shall be fixed to FRP Wall as per drawing.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and woRA finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable woRAen blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Providing material and labour for fixing Zinc material indicator bolt of approved make for toilet door with Thumb Turn inside & Emergency Release & Indicator Outside with necessary screws etc complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured).

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc, Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rRA of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:-Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed > 45 m/sec as per IS 875- Part 3 (ii) Sites with structure height more than 20m for all wind speeds Fixed window/ventilator without mullion / transom Using R1 series with frame (33mm & above) x (35mm & above) (Height upto 0.9 metre).

Providing and fixing 50mm thick Glass Fibre Reinforced Plastic (FRP) partition with 2.7 mm thick panels on either side with infill of polyurethane foam (PUF) / Polystyrene foam as filler material throughout the panel, to be casted monolithically with testing parameters of F.R.P complete as per direction of Engineer-in-charge. The partition shall be fixed to the framework as per drawing specification. The rate is inclusive of the cost and conveyance of all fixing accessories, and installation cost. etc complete. The framework shall be measured under relevant item.

8. STRUCTURAL STEEL WORK-Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and outside locking with push-pull operation including the cost of hoRA cover and spring etc. complete. (B) Shutters having width 3.5 M. and above

Providing and fixing ball bearing for rolling shutters.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing and fixing stainless steel (Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

9.FLOORING-Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red, Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting,dado,riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete..Size of Tile 600 x 600 mm.

Providing and laying antiskid pool tile in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete..Size of Tile 247 x 122 mm

10. WATERPROOFING-Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, pRAiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The prRAuct performance shall carry guarantee for 10 years against anyleakage.For vertical surface two coats @0.70 kg per sqm

Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, pRAiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The prRAuct performance shall carry guarantee for 10 years against anyleakage.For horizontal surface one coats @1.10 kg per sqm

Application System: Supply and application of PU MAGNUM US used as single component water proofing membrane with superior mechanical and chemical properties applied with a consumption of min. 1.5Kg/Sq.m based on pure elsastomeric poly urethene resin which is applied over concrete surface covered by protective cement screed. PU Magnum provides elongation of break as per ASTM D412 >600%, tensile strength upto 4Mpa as per ASTM D412, shore A hardeness >50 as per ASTM D2240, pull of adhesion to concrete min. 1.5MPa, water permiability on coated concrete@ 5bar for 72 hours as per BS EN 12390-8 passes, crack bridging ability is >3mm and percentage of solid content is >85% as per ASTM D 1644. Laying a Geotextile membrane of 300 GSM post application before application of screed with slope.Application System: Supply and application over surface cracks within 2mm using SmartCare repair mortar is a ready to use singe component polymer mRAified repair mortar. It is specially designed for repairs of RCC members with a Compressive strength of 38MPa at 28days as per ASTM C 109:99, Flexural strength og 8MPa as per ASTM C580, tensile strength of 2.5MPa and density of 2118 kg/cubic metre as per ASTM C 138.

11. FINISHING WORKS-Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (l-cement:3-sand)

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement :3-sand) and 8mm thick finishing coat of C.M. 1:1(1-cement : 1-sand) etc. complete.

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)

Sec.6.0 Plastering & Pointing works Providing material and labour for laying 10mm thick cement plaster in single coat on ceiling & stairs and soffits plastering and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) for all floor, all level, all height (including all basement) with necessary scaffolding, curing, finishing, making grooves, forming pattas, hacking properly to RCC surface etc. complete as directed by the Engineer-in-charge.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Wall painting with acrylic emulsion paint having VOC content less than 50grams /litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour : Two coats

Grading roof for water proofing treatment with:Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .

Providing and fixing randeur toilet cubicle of standard dimension which includes 600mm door size width made of heat ,bacteria,water,chemical,stratch,impact,anti bacterial resistant 18mm thick solid compact laminate panels tested by shriram test house. finish of the compact laminate should be suede/raw silk,which includesdoors,pilasters and intermediate panels finished with approved texture/shade as per the detail drawings and as per IS 2046 indian standard and as per fire retardant BS-476/97 standard. The prRAuct should have Green guard certificate. This also includes providing and fixing in position necessary hardware made out of stainless steel(grade 304) as per manufacturers specification and Architects instruction like (1) door knob (2) gravity hinges(3) Thumb turn socket indicators (4) coat hooks (5) U-channel,(6) SS shoe box plate (7) MS plate base(8) Rubber noise deafening tape (9)screws and wall plugs. All screws of 304 grade in stainless steel with satin finish.All pilasters area supported by MS-Base steel bottom cladding with stainless steel shoe box plate. The base of stainless steel shoe box will be anchored to the floor with a clearance height upto 110mm. fixing of intermediate panels to the wall shall be stainless steel 'L' bracket or stainless U channel section are fixed into wall with screw inzerts.

Providing and fixing of starwhite vitreous china urinal division plate of approved quality and make with fittings/fastener including cutting and making goRA the walls,floors,slab,cost and conveyance of all material,labour charge,lead,lift,all taxesetc.complete as directed by the Engineerin charge at all levels.(MRAel:Hindwarecatalogueno:F61001/CeraS4090101SN or equivalent).

Providing and fixing of high-quality, weather-resistant fabric awning sheets made from UV-stabilized, waterproof, and durable materials such as polyester or acrylic, coated with PVC or similar weatherproofing agents, to the required dimensions as per the design drawings. The fabric shall be of approved color, finish, and pattern. The fabric will be installed over a sturdy, rust-resistant metal frame structure, which shall be made of aluminum, ensuring long-lasting durability and resistance to corrosion. The fabric awning shall be tensioned properly to prevent sagging or wrinkling and shall be securely fastened using stainless steel or corrosion-resistant fittings, ensuring that the fabric is taut and properly aligned.

Providing and fixing 20mm thick stone cladding of approved,quality and material of matt/glossy finish over finished surfaces of walls using approved qulaity adhesive in all heights and levels as per the approved drawings and direction of Engineer-In-Charge. The exposed surface shall be finished with 100% Aliphatic Polyurethane (PU) coating. Sample shall be approved prior to procurement. The rate includes all material,labour, scaffolding etc all complete

12 JYOTHIRLINGAM-Providing and fixing of Temple for Jyothirlingam of size 1.30m x 1.30 m x 2.70m made from high-quality, durable, and weather-resistant hard granite stone, to the approved design and dimensions as per the drawing . The Jyothirlingam shall be carved or sculpted meticulously by skilled artisans to achieve a smooth, polished surface with precise detailing, ensuring the proper shape and aesthetic accuracy. The stone shall be sourced from a reputed supplier and must conform to the necessary standards for strength, durability, and spiritual significance, ensuring that the material remains free from cracks or defects.The Cost includes the cost of granite stone ,labour work for carving ,errection ,transportation an necessary scaffolding work etc. complete as per direction of Engineer -in-charge.The qty of stone considered approximately

Providing and laying cement concrete 1:4:8 (1- Cement :4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M25 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (lcement:3fine sand) etc complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory methRA using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge. A) 60 mm thick C.C. paver block of M-35 grade with approved color design and pattern.

Supplying and stacking of goRA earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

Spreading of sludge, dump manure and/or goRA earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or goRA earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable materials as per direction of officer in charge (excluding cast of plant & water ) Cost of plantation per Shrubs plants

Providing and displaying of Dracaena rosea plant, having ht. 30 cm & above with 8 to10 leaves, well developed, fresh and healthy in poly bag of zize 20cm as per direction of the officer-in-charge.

Providing and stacking of Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge

Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in poly bags of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 45-60 cm in ploy bags of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Tecoma gaudichaudi of height 90-105 cm.,bushy inpoly bags of 45-60 cm size as per direction of the officer-in-charge.

Providing and stacking Allamanda cathartica of height 30 cm to 45 cm in poly bags of 20cm size as per direction of the officer-in-charge

Providing and stacking Ipomoea purpurea (Morning glory) of height 30 cm to 45 cm in poly bags of 20 cm size as per direction of the officer-in-charge.

14 EXTERNAL DEVELOPMENT WORKS-Providing material and labour for excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering.

Providing and laying cement concrete 1:4:8 (1- Cement :4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying in position Ready Mixed M250 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg )

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (1) Edges of slabs and Breaks in floors and walls.

ProvidingTMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level

Providing fusion bonded Epoxy coating not less than 175 micron thickness and upto 300 micron to reinforcement bars of any diameteer as per IS-13620-1993/ ASTM-775 M including testing of coating at plant and all taxes etc complete as directed by engineer ion charge.

Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above plinth level upto floor two level in cement mortar 1:5 ( 1cement : 5 fine sand ) complete as per Technical Specification

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (l-cement:3-sand)

Providing and fixing 20mm thick stone cladding of approved,quality and material of matt/glossy finish over finished surfaces of walls using approved qulaity adhesive in all heights and levels as per the approved drawings and direction of Engineer-In-Charge. The exposed surface shall be finished with 100% Aliphatic Polyurethane (PU) coating. Sample shall be approved prior to procurement. The rate includes all material,labour, scaffolding etc all complete

Supplying and stacking of goRA earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

Spreading of sludge, dump manure and/or goRA earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or goRA earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable materials as per direction of officer in charge (excluding cast of plant & water ) Cost of plantation per Shrubs plants

Providing and displaying of Dracaena rosea plant, having ht. 30 cm & above with 8 to10 leaves, well developed, fresh and healthy in poly bag of zize 20cm as per direction of the officer-in-charge.

Providing and stacking of Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge

Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in poly bags of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 45-60 cm in ploy bags of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Tecoma gaudichaudi of height 90-105 cm.,bushy inpoly bags of 45-60 cm size as per direction of the officer-in-charge.

Providing and stacking Allamanda cathartica of height 30 cm to 45 cm in poly bags of 20cm size as per direction of the officer-in-charge

Providing and stacking Ipomoea purpurea (Morning glory) of height 30 cm to 45 cm in poly bags of 20 cm size as per direction of the officer-in-charge.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M25 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (lcement:3fine sand) etc complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory methRA using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge. A) 60 mm thick C.C. paver block of M-35 grade with approved color design and pattern.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineerin-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100- 120 TPH capacity.

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentageby weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity

Providing and fixing Glass Fibre Reinforced Plastic (FRP) vendor stalls with all accessories etc complete as per the drawing and direction of Engineer-in-charge. The partition shall be fixed to the framework as per drawing specification. The rate is inclusive of the cost and conveyance of all fixing accessories, and installation cost. etc complete. The framework shall be measured under relevant item.

Providing and fixing in postion FRP Bench 2nos, with Planter Box of Length 156 cm ,60 cm width and 36 cm height with FRP back support for a height of 67 cm and width 30 cm. The back support shall be provided with planter box of inside width 80 cm and length 385cm.The bench shall be prepared as per approved drawing and as per the direction of E.I.C.The cost is including necessary frame work. etc complete.The Bench shall be made of FRP 11 to 12 mm thickness ( 1000kg capacity ) and the planter box shall be made of FRP thickness 2 to 3 mm thickness. ( Type 2 -L Shape)

Providing and fixing in postion FRP Bench with Planter Box of Length 228 cm ,93 cm width and 36 cm height with FRP back support for a height of 67 cm and width 30 cm. The bench shall be prepared as per approved drawing and as per the drawing direction of E.I.C.The cost is including necessary frame work. etc complete.The Bench shall be made of FRP 11 to 12 mm thickness ( 1000kg capacity ) and the planter box shall be made of FRP thickness 2 to 3 mm thickness. ( Type 2 -L Shape)

Providing and fixing in postion GFRC DRINKING WATER POINT in Damru shape as per approved drawing and as per the drawing direction of E.I.C.

Careful disassembly and relocation of an existing stone gate (15.00m width x 8.70m height) using mechanical means. Work includes excavation, backfilling, and precise reinstallation to ensure structural integrity and alignment.

16 MAHADWAR ARCH-Construction of Temple mRAel architectural entrance of length 22.30 m, width 3.75 m and height at both ends 6.50 m and 10.30 m at centre made of high-quality, durable and weather-resistant hard granite stone as per the approved design and dimensions and drawing with special temple artist. The Pillars shall be carved or sculptured meticulously by skilled artisans to achieve a smooth, polished surface with precise detailing, ensuring the appropriate shape, aesthetic accuracy and appearance.The stone shall be sourced from a reputed supplier and must conform to the necessary standards for strength, durability and spiritual significance, ensuring that the material remains free from cracks or defects.The entrance structure is sub divided into 3 parts as shown in the drawing. The structure shall be constructed using granite stone blocks, cut and finished to the required size and shape, ensuring a smooth, polished surface with uniform color, texture aesthetic appeal. The rate includes preparation of special carving artistic design and shop drawing, the cost of granite stone,precast RCC slab and beam , labour charges for carving, smoothening, transportation, assembling, errection,and necessary scaffolding work, etc; complete as required at site and as per direction of Engineer -in-charge.The quantity of stone considered is approximate

17 COMPOUND WALL-14 EXTERNAL DEVELOPMENT WORKS-Providing material and labour for excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering.

Providing and laying cement concrete 1:4:8 (1- Cement :4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying coursed rubble masonry with hammer-dressed stones of average size 330 mm x 230 mm x 180 mm (approx.), in 1:6 cement mortar (1 part cement : 6 parts coarse sand), carefully laid in regular courses, including dressing of stones, raking out joints, watering, curing, scaffolding, and all leads and lifts, up to plinth level and in superstructure as per design, drawings, and specifications, complete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete

Providing and applying Stone Crete Plaster / Exposed Aggregate Plaster with a durable and weather-resistant textured finish for both interior and exterior applications. The plaster shall consist of a top layer of 12 mm cement plaster with a 1:2 mix ratio (cement: stone aggregate) and a base layer of rough cement-sand plaster with a 1:3 or 1:4 mix ratio, applied at a thickness of 12–15 mm. The exposed aggregate finish shall be achieved by scrubbing and washing the surface with brushes after application to reveal the natural stone aggregates. WoRAen or aluminum strips of 12 mm x 10 mm x 12 mm shall be used to create clean grooves at intervals of 2 meters as per the approved design. The mix shall comprise 3 parts cement, 1 part marble powder, and 6–7 parts marble chips blended uniformly with water. Application shall be carried out in sections, ensuring levels are maintained, and the batons shall be removed for groove finishing and polishing. The work shall include surface preparation, material mixing, application, curing, and finishing, as per the detailed specifications and as directed by the Engineer-in-charge. The rate is inclusive of all materials, labor, and scaffolding arrangements required for execution.

Procuring healthy grass free from weeds and foreign materials and laying on the soil medium as turfing,the rate include for grass cost, transport to site, cost and application of manure, planting, labour, supervision and maintenance for 2 months after planting Pearl Grass

Providing and displaying of Plumeria plant, having ht. 3ft , well developed, fresh and healthy in poly bag of zize 20cm as per direction of the officer-in-charge.

CHAPTER-1 MEP WORKS : POINT WIRING IN COPPER (MODULAR) Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed. With medium class Rigid PVC pipe and accessories. (Cat. III)

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in/flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal/PVC box covered with 3mm thick PC (Polycarbonate) /Acrylic sheet for open/concealed wiring. With necessary Lamp holder/ceiling rose/H. D. Connector as directed. Note: - Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point. With medium class Rigid PVC pipe and accessories.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm. (green) both are of ISI marked 1.1 KV Grade FR PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/ Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary ceiling rose / H.D. Connector as directed With medium class Rigid PVC pipe and accessories. (Cat. III)

Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in / flushed on wall/ ceiling, with 1.5 sq. mm. copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. With medium class Rigid PVC pipe and accessories. 2 wire 2.5 sq. mm.

Main with 1.1 KV grade FR PVC insulated ISI marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. With medium class Rigid PVC pipe and accessores. 2 wire 4 sq. mm.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet Each

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules,GI box along with modular base, cover plate for modular switches in recess etc as required. 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing of following ways,single pole and neutral sheet steel ,MCB distribution board ,240 V on surface /recess ,complete with tinned copper bus bar ,neutral bus bar ,eart bar ,din bar ,interconnection ,power ,painted inluding earthing etc ,as required (but with out MCB /RCCB/ISLOLATOR) 8 way , double door

12 way , double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing andcommissioning etc. as required. Single pole

Supplying and fixing following rating, double pole,,240 v ,isolator in the exixting MCB DB complete with connection ,testing and commissiong etc as required 40 amps

Supplying and fixing following rating, four pole,,415v ,isolator in the exixting MCB DB complete with connection ,testing and commissiong etc as required 40 amps

Supplying and fixing following rating, Double pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps

CHAPTER-3 EARTHING-Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 3 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & sprina washer spaced at 50mm)

CHAPTER-4 MV CABLE LAYING - Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 2.0 X 6 sq. mm

2..0 X 10 sq. mm

4.0 X 16 sq. mm

3.5x50 Sq.mm Al XLPE Cable

CHAPTER-5 BLDC - Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

CHAPTER-6 SUPPLY OF LT CABLES & CABLE TERMINATION - Supply of XLPE insulated armoured cables with aluminium conductors for working voltages upto and including 1100V confirming to IS 1554 part I for PVC and IS 7098 Part I for XLPE 3.5x120 Sq.mm Al XLPE Cable

3.5x50 Sq.mm Al XLPE Cable

4.0 X 16 sq. mm

2.0 X 6 sq. mm

2.0 X 10 sq. mm

CHAPTER-7-LIGHT FITTINGS / FANS- 12W Surface mount Light

20W Tube Light

9W Recessed Light

10W Mirror Light

Wall Light 10W(BULK HEAD)

1x15W Bollard Lights (Civil works including)

3M antique finish decorative Pole & 40W LED street Light with necessary arms for light fixtures (Civil works including)

4M antique finish decorative Pole & 60W LED street Light with necessary arms for light fixtures (Civil works including)

50W Flood Light

80W Flood Light

70W Linear Wallwasher Light

1W Down Led Wall Light

CHAPTER-8-LT PANELS-FEEDER PILLAR-1 ( OUT DOOR) Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feeders Base frame 70 X 40 mm MS Black Colour powder coated C Chanel. Bus bar 125 Amps TPN aluminium bus bar Earth Bus 25 x 3 mm Copper busbar Incomer: 125A TPN 25 KA Thermal Magnetic based MCCB with spreader and handle - 1 No. 3) Meters & Indications: Red, Yellow and Blue Indication Lamps- 3 Nos 2Amps SP MCB -3 Nos Outgoing : 40 A 2 Pole MCB -4 Nos. 40 A 4 Pole MCB - 2 Nos. 63 A 4 Pole MCB - 1 Nos. Supply and Fabrication charges

ELV WORKS - Supplying and fixing of 25 mm Medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, installation, testing and commissioning of IP based IR bullet Camera, 1/3" CMOS,5 MP, night colour vision compatible,IR range of 40 mtrs PoE, Ethernet port, H.264, IP 66, ONVIF, UL, FCC & CE certified. All mounting accessories shall be included

Supply,installation, testing and commissioning of IP Network Video Recorders 16 channel with 16 ports, 2 SATA, audio 1 input 1 output, video 1 HDMI 1 VGA, recording resolution 5MP/3MP/1080P, 720P/ D1 @ 30 fps, network throughput 200 Mbps from IPC and 128 Mbps to Client, Smart search supported, Remote access by DDNS & P2P, 4 channel alarm input and 2 channel relay output, 2 USB ports, ONVIF, UL & CE certified.

Supply, installation, testing and commissioning of 16 port- Edge PoE switch

Supply and installation of Cat 6 UTP patch cord, 1 mtr

Supply, installation, testing and commissioning of Surveillance / ESATA compatible Hard Disk of 4TB capacity to achieve the total storage for the NVR server

Supply, Installation, Testing & Commissioning of 42 inch full HD LED monitor with resolution 1920X1080 pixel including wall mounting accessories (location: security room & central control room).Material shall be UL/CE listed

Supply and installation of 9U rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 19" mounting angles, top, bottom open, RAL 9005 with all other accessories

PHE SYSTEM A. SANITARY FIXTURES - Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(1) Long pattern = White colour

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.

Providing and fixing C.P. brass angle valve for basin and geyser points of approved quality conforming to IS:8931

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing C.P. ss towel rail comlete with C.P. brass/ ss brackets fixed to wooden plugs with C.P. brass/ ss scews.(B) 600mm x 20mm size. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. Make: Bluestar,voltas,aquagaurd

C. WATER SUPPLY (INTERNAL AND EXTERNAL)- Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 32mm dia

40 mm dia

50 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. as per direction of Engineer in Charge. Internal work - Exposed on wall 1¼ ''(25mm) dia. (Exposed on wall /ceiling) Cold water supply

1¼ ''(32mm) dia. (Exposed on wall /ceiling) Cold water supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. ¾ ''(20mm) dia. (Internal / Concealed) water supply

1” (25mm) dia (Internal / Concealed) water supply

1¼”(32mm) dia (Internal / Concealed) water supply

Supplying,Fixing, testing and commissioning at site in positions Automatic Air Release Valves, ball valves of approved quality and make on the top of the vertical water supply pipes as per specification and drawings 1"(20mm) dia

NON RETURN VALVE cast Iron double flange as per IS/5312 PN 1.6 rating complete with Bronze body & wedge Stainless Steel spindle, Gland packing, Rubber gasket 1¼”(32mm) dia (External / in Shaft)

1¼”(40mm) dia (External / in Shaft)

D. EXTERNAL SEWERAGE - Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :

Supplying and fixing Ductile Iron (Hinged Type) cover and frame. (As per EN – 124 standard) Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5

A. SANITARY FIXTURES.- Fixing, Testing and Commissioning at site Wall Mounting type water closet with P trap & its all fittings like rag bolts, solid plastic Seat cover etc complete including cutting and making good the walls and floors wherever required, Concealed flushing cistern with brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever requiredEtc complete.Queo - (Zelos Neo+CC Sisma)/ KOHLER ESCALE K16817IN-SS-0, OR Equ.

Fixing, Commissioning at site Urinal Partition with fCurved shaped frosted glass fixing with brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever requiredEtc complete. 900x450x10 mm tk. Make: Jaquar 1110uc/ equ.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin counter top type 550x420 mm with a 15 mm CP Brass single hole basin mixer . Make: Jaquar, Kohler, Grohe, Cera high end series.

Fixing, Testing and Commissioning at site ablution Health Spray Faucet with wall hook and 1.2 mtr. Chrome plated PVC hose pipe, etc. complete in all respects. Queo - Addons/Kohler/Grohe

Queo - Q363196120/ KOHLER K-97499T-CP/Grohe 41711, OR Equ.

Providing and fixing of bathing accessories set of one pair of soap dish holder, one no. tumbler holder, one no. napkin ring, one no. 600mm glass shelf with all required fittings and accessories.

Supply, installation, testing and commissioning of brass chromium plated 2 way shower diverter, spout & 6 inch dia wall fixed shower 15/20mm including all fittings, accessories and connections. Make: Jaquar, Grohe, Hindware, Kohler, Cera

Providing, Supply, installation, testing and commissioning of CP Grab bar 60 cm, complete including cutting and making good the walls, wherever required.

Providing, Supply, installation, testing and commissioning of CP Hinged rail , complete including cutting and making good the walls, wherever required.

B. SOIL, WASTE, VENT & RAIN WATER PIPES - Supplying, Fixing, testing and commissioning at site in position uPVC pipe -6kg/cm2) (IS:4985) Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, etc., complete. (Soil & Waste in Shaft) Make: Astral/Supreme/Ajay IN SHAFT 110 mm O.D. (6Kgf/cm2 IS:4985)

75 mm O.D.(6Kgf/cm2 IS:4985)

63 mm O.D ( 4Kgf/cm2) Vent pipe in shaft

Providing, Fixing, testing and commissioning at site in position uPVC pipe ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, etc. complete. (For Rain water pipes in shaft & Ceiling) Make: Astral/Supreme/Ajay IN SHAFT ( PASTING ONLY) 110 mm O.D ( 4Kgf/cm2)) Rain water pipe in shaft

Supplying, Fixing, testing and commissioning at site in position u PVC pipe of 6Kgf/cm2including PVC fittings with bosses where required e.g. tees, bends, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts ,washers, wherever required etc. complete.Make: Astral/Supreme/Ajay (For Internal Soil &Waste line) (PASTED ONLY) 50 mm O.D. (6Kgf/cm2 (IS:4985)

75 mm O.D. (6Kgf/cm2 (IS:4985)

110mm O.D (6Kgf/cm2 (IS:4985)

32 mm O.D. (8Kgf/cm2 (IS:4985) for sunken spout

Supplying, Fixing, testing and commissioning at site in position Deep Seal UPvc fabricated Multi floor trap (7”), with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects. 50/75 mm dia outlet (In Ceiling)Astral/Supreme/Ajay

Supplying,Fixing, testing and commissioning at site in position UPvc fabricated Multi floor trap (4”), with 50/75 mm dia outlet (In Sunken slab & floor raising areas)Astral/Supreme/Ajay

Supplying,Fixing, Testing and commissioning at site in position 150x150mm square C.P cast brass or stainless steel anti cockroach grating cover ss (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects Chilly/Eligna/

Supplying,Fixing, testing and commissioning at site in position Concealed floor trap (4” UPvc fabricated Multi Trap, with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw. etc. complete in all respects. Chilly/Eligna/

Supplying,Fixing, testing at site in position 160mm dia square /circular grating Terrace rain water outlet (Cast Iron)(for 110mm dia pipe)

Supplying,Fixing, testing at site in position 160mm dia square /circular grating Floor Khurra drain rain water outlet (Cast Iron)(for 110mm dia pipe)

C. WATER SUPPLY (INTERNAL AND EXTERNAL)-Supplying,Fixing at site in position full way lever operated forged brass Ball valve of brass body with forged brass hard crome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings ¾” (20mm) dia

1 “ (25mm) dia.

1 ¼ “ (32mm) dia.

1 ½” (40mm) dia

D. EXTERNAL SEWERAGE - Supplying and Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, with proper bedding uPVC pipe of IS 4985(6kgf/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete as directed by the Employer 110mm OD (6/kg/cm2)

160mm OD (6/kg/cm2)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.2000 LTR

Supplying, Fixing, Testing & commissioning at site in position, High-grade Fiber Reinforced Plastic (FRP) with UV-stabilized resin, ensuring long-term durability and resistance to corrosion. Cylindrical/rectangular in shape with baffle chambers and internal partitions as per IS 2470 (Part 1 & 2) standards ( 25-35 Flush /day- Type -5).Wall Thickness: Minimum [specify, e.g., 6-8 mm] depending on tank size and load conditions.Inlets and Outlets: Pre-molded provisions with PVC/HDPE pipe connections (diameter [specify size, e.g., 110 mm]).To be installed below ground level as per manufacturer's guidelines, including excavation, backfilling, and compacting.RCC base slab (if required) to support the septic tank as per structural engineer’s design. Leak-proof testing with water to ensure no leakage from joints or body,The supplier must provide a warranty of at least [specify, e.g., 5 years] against manufacturing defects.The manufacturer must be ISO 9001 certified.

Supply, installation,testing and commissioning of Grease Chamber round type having capacity of 400-600 litter. The separator for greasy wastewater is suitable for installation in the ground and comes without metallic components in the tank. The collecting tank made of permanently resistant polymer (PE) is equipped with an integrated sludge trap and has a rounded base for fast and clean disposal. Access for cleaning and maintenance work is possible via one or several service access covers. A direct disposal pipe socket shall be available for odour-reduced manual disposal. A load distribution slab must be installed on site for load class D. The reinforcement shall be provided as per OEM specification . installation depth 550-900 mm,net weight not less than 130 kg and gross wight not leass than 137 kg

Supplying, Fixing at site in position soak pit Square type (90 *90*150 cm)

Providing and fixing C.I. cover with frame (Medium duty) 450x450 mm , total weight of cover and frame to be not less than 108kg FOR SUMP TANKS

Supplying, Fixing, Testing & commissioning at site in position, Water treatement plant capacity (1000 LPH), raw water feed pump capacit 2 Hp, pre-filtration stages (sand filter-600 mm dia, carbon filter-600 mm dia,Iron filter -600 mm dia), high-pressure pump 3hp, RO membrane details (8040,), post-filtration (micron filter20" jumbo ), storage tank capacity hav e100 ltr , material of construction (stainless steel), control panel features, electrical requirements, and optional features like UV disinfection or TDS monitoring, all designed to produce 1000 liters of purified water per hour, Dual media filter unit-1 no,Iron media filter -1 no Active carbon filter-1 no ,Hih preesure pump 3 hp with control panel 8040 membrane pressure gaue(2" dia) -2 no,Catridge filter system -1 no ,Dosing pump-1 no Dosing tank -100 ltrFilter feed pump -2 no (2 HP)

Supply, installation, testing and commissioning of Water pond filtration system comprising of Bobbin wound Sand filter 760 mm dia with side mount 6 Way Multiport Valve, Filter Media (Silica Sand) 25Kg. Bags, Filtration Pump with Prefilter, Wall inlet fitting in ABS, 2" Connection, Vacuum Point in White ABS with, 50mm Connection, Anti Vortex Drain in white ABS BL 311, Skimmer in white ABS SL-111M, Warm White LED Under-Water Light without Niche, LED Driver Protection Box, Universal Deck Box in White ABS, 63mm PVC Double Union Valve, 63mm PVC 3 piece Union adaptor, Concrete Metal Vacuum Head, Floating Hose 12 mtrs, Telescopic Pole 2.4 to 6.4mtr in 3 parts, Luxury Deep leaf rake made in polypropelene and aluminium frame, Luxury Surface hand skimmer with aluminium frame, Curved brushes made in polypropelene and with aluminium reinforcement 45 cms for for pool basins, Test kit for chlorine & pH, Control panel for pumps with necessary controls, and other standard accessories as instructed by S-I-C.

Supplying, Fixing, Testing & commissioning at site in position, Re-circulating Pump : 0.5 H.P, 0.36 KW, Single Phase, Horizontal, Centrifugal, Self Priming Pump with Mechanical Seal and with attached Pre-filter with transparent polypropylene Lid. Flow Rate : 6.5 m3/hour @ 10 meter head.Pump Starter : Single Phase.

Supplying, Fixing, Testing & commissioning at site in position Fountain Bubble Jet Nozzle : MOC - SS 316. With 1" BSP Connection & 32 mm Orifice.

Supplying, Fixing, Testing & commissioning at site in position Floor Inlet : Made in ABS with S.S. Screws. Regulable Flow. Flow per Inlet : 5000 LPH. White Colour.

Supplying, Fixing, Testing & commissioning at site in position Suction Nozzle : Made in ABS. 2" connection. White Colour.

IRRIGATION WORK- Supply, laying & jointing in position PVC pipe confirming to IS:4985:2000 and suitable for the respective working pressures without all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction.The rate shall including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer-in-Charge 63mm-10 kg/cm²

50mm-10 kg/cm²

40mm-10 kg/cm²

32mm-10 kg/cm²

25mm-10 kg/cm²

20mm-10 kg/cm²

DRIP & ACCESSORIES Supply & Fixing of flexible,kink resistant, inline tubing and copper shield technology protects the root intrusion,self flushing,resistant to UV damage and algae growth drip tube, with a flow rates of 2.3lph to 3.5 lph and pressure rating of 0.58 to 4.14 bar.The rate shall include cost of all required fittings and accessories like Clamps,connectors,tees,elbows,adaptor,coupling etc complete in all respect required for fixing drip tube as per approved design,make and quality as directed by Engineer-in-Charge. 16 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

SPRINKLERS & ACCESSORIES Supply & Fixing of Pop up spray head Spray bodies, having Co-moulded wiper seal is moulded into the cap and features like pressure-activated, multi-function seal design,with an encased plastic 'cage' to provide unmatched resistant to grit, with high efficiency VAN Nozzle capable of covering 0.9-5.5m at 1.0 - 2.1 Bars, pressure, and the environment with proven UV resistant plastic.The rate shall include cost of all required fittings and accessories like swing joint,service saddle as per required size etc complete in all respect as per approved design,make and quality as directed by Engineer-in-Charge.

Supply & Fixing of Pop up spray head Spray bodies, with hand adjustable rotary nozzle having mutilple stream spray having Co-moulded wiper seal is molded into the cap and features like pressure-activated, multi-function seal design,with an encased plastic 'cage' to provide unmatched resistant to grit, nozzle capable of covering 5.2-7.4m at 1.4 - 3.8 Bars, pressure, and the enviroment with proven UV resitant plastic.The rate shall include cost of all required fittings and accessories like swing joint,service saddle as per required size etc complete in all respect as per approved design,make and quality as directed by Engineer-in-Charge. 360* POP UP(3/32 nozzle)

270* POP UP(3/32 nozzle)

180* POP UP(3/32 nozzle)

90* POP UP(3/32 nozzle)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

B VALVES & ACCESSORIES-Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore+D177:L177

Providing and fixing bronze ball valve with screwed female/flanged ends with stainless steel valve and spindle, glass fileed tefelon seating and gland packing, quarter turn lever operate full bore design, hydraulically tested to 20 kg/sqcm complete in all respect as per approved design,make and quality as directed by Engineer-in-Charge. 15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore (butter fly valve)

Supply & Fixing of a double acting 1/2 " PVC Air release valve, The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar.complete in all respect as per approved design,make and quality as directed by Engineer-in-Charge.

Supply & Fixing of 12" Rectangular Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout complete in all respect as per approved design,make and quality as directed by Engineer-in-Charge.

Supply & Fixing of 6"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout complete in all respect as per approved design,make and quality as directed by Engineer-in-Charge.

Supply & Fixing of 25mm dia brass Quick coupling valve fittings with of auto close lid, SS spring, brass valve complete in all respect including key as per approved design,make and quality as directed by Engineer-in-Charge.

Supply & Fixing of Key threads into top of Quick coupling valve to provide water access complete in all respect as per approved design,make and quality as directed by Engineer-in-Charge.

Supply,Installation, Testing and commissioning of Clear water transfer open well submerssible pump of adiquate hp with discharge 3 lps at 24 mtr head, SS body, ss shaft with bronze impeller mounted on a single base plate with controll panel and auto level controller. 1 working+ 1 stand by

Please Enable Macros to View BoQ information