Comprehensive certain misc repair works in 108 TA Inf Bn, 372 ASC Supply and other small units in area of AGE B/R-I under GE Saugor

Amount

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar and removing rubbish from site complete all as specified and directed.

M &L for Brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M & L stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in Cement -mortor 1 : 6 complete all as specified and directed.

Ditto all as per item no. 3.00 but except stone.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from site complete all as specified and directed.

M & L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary fair faces / other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement etc.

M & L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth etc.

M & L for rendering 15mm thick cement plaster on wall in cement mortar 1:4 on brick wall / Concrete surfaces of finishing the surfaces even and smooth etc.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M & L for prepration of new wall surfaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc complete all as specified and directed.

M & L for complete removal of existing treatment on wall and prepration of old surfaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc complete all as specified and directed.

M & L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls etc complete all as specified and directed.

M &L for Applying three coats of white wash on new plastered Ceiling surface including preparation of surface complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor and removing rubbish from site complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces finished even & smooth without using extra cement joints to be filled with sealing compound grade 'A' complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles or kota stone complete all as specified.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding and rubbish off the premises, complete all as specified and directed.

S&F coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.06 sqm and n. exc. 0.11 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 450x 300 x 7 to 8mm thick , joint free (rectified) on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over & including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm and n. exc. 0.36 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over & including 15 mm thick screed bed in CM 1:6 complete etc complete all as specified and directed.

S&F coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm and n. exc. 0.36 sqm as in skirting, dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over & including10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F for 600 x 600x 8-10 mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles, over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F for 600 x 600x 8-10 mm thick coloured vitrified tiles in Skirting , dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles, over & including 10 mm thick rendering in CM 1:4 all as specified and directed.

M&L for mirror polished Machine cut kota stone slab flooring 18-20 mm thick size not less then 550X550 mm over & including 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L Kota stone slab 12-15 mm thick in skirting, over & including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like over & including 15mm thick cement mortor 1:4 set jointed in neat cement slurry with fastners including pointing in white cement mixed with pigment to match shade of the slabs etc complete all as specified and directed.

M& L rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations etc complete all as specified and directed.

M & L for Providing cement concrete 1:2:4 type BO ( using 12.5 mm graded stone aggt ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work etc.

Taking down 15 mm dia GI tubing and connection including cleaning for refixing or removal from site complete all as specified and directed .

Taking down 20 mm dia GI tubing and connection including cleaning for refixing or removal from site complete all as specified and directed

Cutting chases, pinning in, in brick wall for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs brass chromium plated 15 mm bore Wall mixer for mixing Hot & Cold water with arrangement of head shower and with hand shower complete ,high pressure, screwed down for iron pipe fixed in repair complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated WHB mixer for mixing Hot & Cold water high pressure, screwed down for iron pipe fixed in repair complete all as specified and directed.

S&F in repair 15mm bore C P bib taps, cast copper alloy fency type two way with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore C P bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair anglecock/stop cock , 15mm dia, cast copper alloy,CP with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, fixed in repairs complete all as specified & directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair PTMT PVC grating dome type of 100 mm dia complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repair vitreous china WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including Pors Trap, etc complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed.

S&F in repair vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and union for discharge pipe , waste pipe (excluding flushing cistern,flush pipe ) complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed.

S&F in repair 75 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified and directed.

S&F 1000 ltr capacity of rotational moulded polyethyline water storage tank (Cylindrical vertical with closed tape) hoisted & fixed in position complete all as specified & as directed incl. Dismantling water tanks complete all as specified and directed.

S&F 500 ltr capacity of rotational moulded polyethyline water storage tank (Cylindrical vertical with closed tape) hoisted & fixed in position complete all as specified & as directed incl. Dismantling water tanks complete all as specified and directed.

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to wall including ms clamps complete all as specified.

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings complete all as specified.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repair for PVC (SWR) bends of bore 110mm with acess door complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia with acess door complete all as specified and directed.

S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqm each etc complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each etc complete all as specified and directed.

S&F 2nd class H/W, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class HW factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc,sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a),for doors supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides with double or single shutter complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube , S&F in opening as per specification & drawing .

S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S& F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc complete (Al. section thickness 2 mm } ) confirming to IS.

S&F aluminium windows and ventilators sliding type three track powder coated consisting of frame 91.80 mm x 45 mm shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick plain glass with rubber gasket and aluminium beading , Al. handle,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Al. section thickness 1.50 mm }

S&F powder coated anodised aluminium ventilator shutters, half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion, aluminium sections weighing 0.55 kg/m complete all as specified and directed.

M& L for repair of existing aluminium door with taking down and refixing in same location including all necessary fitment for repair complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each paneHacking out old broken glass (any tickness, size,quality or description) from wooden / steel framesglazed with oil putty or fixed with beads complete all as specified and directed. complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete including necessary wooden beading complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 200 mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F 150 mm aluminium anodised cast type handles, and fixed complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix 600mmx600mmx4mm thick ‘E’ Board Classic (Make-Everest industries Ltd) Design Lake & hill as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed including Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness and any description, including cover fillets etc, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof and taking down carefuly etc complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

All as per item no 91.00 as above but except sheets complete all as specified and directed.

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F of structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc., complete all as specified and directed.

S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.

M&L Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces over 10cm width or girth, complete all as specified and directed.

S&F pre- coated coloured galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws.ncluding dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed.

S&F 0.5 mm thick galvalume sheet pre-coated coloured for ridge or fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws complete all as specified & directed.including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets as ridge complete all as specified and directed.

S&F in repair 25 mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified.

Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

For one light point or fan point controlled by one switch.

For one Call Bell point controlled by one push button switch.

For 5Amp independent socket point controlled by one switch.

For one 3 pin ,5 Amp socket point with other switch on the same board.

All as per item No 102.00 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as concealed complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per item No 103.00 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as concealed complete all as specified and directed.

S&F Modular switch, one way,6 Amp 230, 1 module .

S&F modular socket 6 Amp-2/3 pin combined 2 module .

S&F Modular switch, one way,6 A/16 Amp 230, 1 module .

S&F modular socket 6 A/16-2/3 pin combined 2 module .

S&F Modular fan step regulator 120 Watt -2 module .

S&F Modular bell push 6A one module .

S&F switch piano type flush, single pole, one way 5 A 230 V.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V.

S&F switch piano type flush, single pole, one way 15 A 230 V .

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V.

S&F ceiling rose, surface backlite,three terminal .

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting.

S & F in repair/replacement bell ding dong 230 V, single phase.

S&F electronic double space rotary 5 speed type regulator 120-280 V .

S&F bell push flush type one way 5Amp 240 Volt.

M&L sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. (ii) Two runs of single core for main current and one run of single core for earth continuity conductor & one run of PVC Casing-n-caping shall be measured as one unit length.

M&L surface conduit sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC casing -n-caping/pvc conduit of suitable size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. (ii) Two runs of single core for main current and one run of single core for earth continuity conductor & one run of PVC Casing-n-caping shall be measured as one unit length.

S&F testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs including taking down complete all as specified and directed.

S&F testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs including taking down complete all as specified and directed.

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar including taking down. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

S&F double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar including taking down. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

S&F LED Bulk head 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed.

S&F TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.

S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.

S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed.

M/S vikas jain

M/s Vinod Kumar Korpal, Sagar

M K Construction

Pandey Construction and Engrs

dipangashu barick and associates

ARAZAENTERPRISES