Repairing job work of 36 Feet Juice Clarifier

Minimum Repairing job work of 36 Feet Juice Clarifier

36 feet Juice Clarifier Work. i) Dismantling of Mud Cone. ii) Fabrication of mud cone made out from 10/12 mm thk MS plate. iii) Erection of mud cone at position with proper alignment. iv) Erection of MS angle for extra support. v) Fabrication of plate as per size made out from 5/6 mm thk. MS plate for around 2100 mm circumference of bottom plate of compartment no. 4. vi) Erection of above plates at bottom plate of compartment no. 4 around 2100mm circumference with proper levelling. vii) Erection of MS angle for extra support at bottom after erection of plates. viii) Dismantling of worn-out rubber of 50 nos. scrapers. ix) Fitting of 50 nos. rubber made out from rubber seat. x) Weak/worn out welding of plates of all compartments to be rewelded properly. xi) Erection of MS angle for extra support. xii) Patching/replacement of weak plate of 03 nos. mud boot fabricated from 5/6 mm thick M.S. plate. xiii) Patching of under thickness plates in all the compartments of dorr fabricated from 5/6 mm thick MS plate with proper welding and levelling. xiv) Flocculent chamber one no. angle support to be provided and one no. additional scrapper to be proved. xv) Broken supports of juice coil to be provided. xvi) Strengthening of top plate by providing the extra MS channel and MS angle supports and also strengthening of circumference by providing extra MS rings Flocculent chamber. xvii) Round ring portion above mud cone to be patched and strengthening to be done by providing extra supports from outside. xviii) Any leakage found during water trail to be attended. xix) Shifting of all the generated scrap.

PRADEEP ENGINEERING WORKS (BID ID -1151600)

SURAJ FABRICATOR AND ENGINEERS (BID ID -1151601)