ADDITION/ALTERATION CUM SPECIAL REPAIR TO CERTAIN OR MD ACCN AT FAIZABAD

Amount

Taking down chowkhats or frame (with shutter w/o taking of shutter from frame exc 1.5 sqmtr but n.exc 4 sq m each.) complete all as specified and directed .

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 125 X 60 mm complete all as specified and directed .

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 105 X 60 mm complete all as specified and directed .

M&L preparing of surface of wood and wood based material ,steel and iron work new ,of any description and girth , not otherwise described and treated with tar or coil tar black paint treated ends of posts, backs of chowkats etc area exc 0.10 sqm but n. exc 0.5 sqm each complete all as specified and directed .

M & L for PCC 1 : 2 : 4 Type B0 ( 12.5 mm graded crushed stone aggregate) in filling under pressed steel door frame,lintel upto 1.5m clear span,cill, steps,seismic and other similiar bands, plinth courses,string courses, laacing courses parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating complete all as specified and directed .

S & F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as specified and directed .

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F for 300mm long MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed .

S&F Aluminium anodised barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed .

S&F 150 mm long extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed .

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed .

S& F 140 mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed .

S& Fixed in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed .

S& Fixed in repairgalvanised mild steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .

M&L preparation of new wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting two coats with synthetic enamel over a coat of pink primer complete all as specified and directed .

M&L preparation of old painted wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all dropings etc complete all as specified and directed .

M & L for preparation painting new steel surfaces of any description over 10cm width or girth not other wise described with two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed .

Taking down chowkhat or frame (with shutter w/o taking of shutter from frame n.exc 1.5 sqm each.) complete all as specified and directed .

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories. Nexc 2.00 Sqm Each complete all as specified and directed .

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing , specified and directed . (Glass shall be paid measured and paid separately).

M & L for kota stone slab 20-25mm thick in steps, jambs, pillars, win dow-cills, and including 10mm thick screed bed in CM 1:4 with grey slurry mixed with admix ture of pigment to match with shade of stone laid over cement screed and jointed complete all as specified and directed .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed .

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour pvc 'C' channel having a PVC sheet strio of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail,Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supply anf fixing in the frame at site as per specification and drawing complete all as specified and directed .

S&F 100mm long butt hinges medium grade stainless steel and fixed complete all as specified and directed .

S&F Aluminium anodised barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed .

S&F 125 mm long extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed .

S& F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, ramed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed .

S& F mild steel work as inBands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed .

Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match Type B1, 1:2:4 (20 mm graded crushed stone aggregate) complete all as specified and directed .

S&F 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality of both side plain white color rigid and glossy finish and fixed with screws solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet/cupboard sides top and bottom shelves inside complete all as specified and directed .

S&F 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed .

S&F for 30 mm width of flaps continuous piano hinge mild steel,bright finished or electro galvanised complete all as specified and directed .

S&F Aluminium anodised barrel tower bolts 100 mm of extruded section and fixed complete all as specified and directed .

S&F aluminium anodised Hasp and staple 75mm ,safety type brass hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F brass knobs 35mm to 40mm dia complete all as specified and directed .

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubish of the premises complete all as specified and directed .

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed .

M&L screed bed or bedding layer of mortar (1:6) 15mm thick for laying floor finises of tiles complete all as specified and directed .

M&L for rendering 10mm thick in cm 1:4 on verticle surfaces of wall for fixing of wall tiles complete all as specified and directed .

M&L for glazed ceremic coloured tiled in vertical surfaces 350 mm x 250 mm x 7mm/450 mm x 300mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed .

Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick (Square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed .

All as per item No 41 above but on vertical surfaces on skirting complete all as specified and directed .

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .

M & L for green Marble work 15 to 18 mm thick (table rubbed and polished) in steps,riser jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed .

Supply and fixing in repair for PVC coated curtain rod 18 to 20 mm dia including steel bracket complete all as specified and directed .

supply only two nos PVC brass coated finials (Latto) to be fixed with 19/20 mm drappery/curtain rod complete all as specified and directed .

M&L Granite 20mm thick of any type work table rubbed and polished in steps, jambs, pillars, window cills,cooking plateformsand like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed .

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia complete all as specified and directed .

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia complete all as specified and directed .

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed .

S & F 20 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed .

Refixing for 15 mm dia old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed .

Refixing for 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed .

Dismantling of 75/100 mm dia cast iron or reinforced concrete drain pipes, jointed in cementmortar and taking out of trenches, if required complete all as specified and directed .

S & fixed in repair for cast iron floor trap/nanhi trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate ,75mm dia outlet complete all as specified and directed .

S&F cast iron soil waste and vent pipes and also as in spout in any length with or without ears with lead joints fixed in wall or in floors using sand cast CI pipes 75 mm bore pipes etc complete all as specified and directed .

All as per item no 57 above but for 100 mm bore complete all as specified and directed .

All as per item no 57 above but for 75mm bore but except pipe complete all as specified and directed .

All as per item no 57 above but for 100 mm bore but except pipe complete all as specified and directed .

S&F CI bends Tee or Y-shape branches pieces of 75 mm dia complete all as specified and directed .

S&F 75mm branches pieces double equal or unequal or inverted socket typecomplete all as specified and directed.

S&F 100 dia CI bends with oval acces doors complete all as specified and directed .

S&F 100 mm dia CI bends, Tee or Y- shape branches pieces complete all as specified and directed .

Taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc complete all as specified and directed .

M&L for rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces cement mortar (1:6) finished even and fair without using extra cement complete all as specified and directed .

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finishing the surface even and fair without using extra cement complete all as specified and directed .

M & L rendering in ceiling, chajja and like items, 5 to 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete, surfaces, finishing fair and even complete all as specified and directed .

Complete removal of existing treatment preparation and applying two coats of oil bound distemper over 3 mm thick wall care putty and over one coat of primer complete all as specified and directed .

M&L for preparation of old decorated surface of ceiling and applying one coats of whites wash complete all as specified and directed .

M&L for preparation of new plaster of wall and applying two coats of oil bound distemper over 3 mm thick wall care putty and primer on plaster surfaces complete all as specified and directed .

M&L for prepararion of new plastered surfaces of wall and applying two coats of cement base paints over a coat of cement primer complete all as specified and directed .

M&L for complete removal of existing treatment preparation and applying two coats of cement base paint over primer on plaster surface on external wall surfaces complete all as specified and directed .

M&L for preparation of old surfaces applying two coats of Appex paints on projection surfaces of coloumn,facia ,fin of chajja etc complete all as specified and directed.

M&L for preparation of ceiling surfaces and applying three coat of white washing on new plastered ceiling surfaces complete all as specified and directed .

Dismantling of PVC water storage tank exc 250 and not exc 500 ltrs capacity and removing to store complete all as specified and directed .

Demolition of RCC tank Concrete of any description and in any position not otherwise specifically provided for cement is reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed .

S&F 500 ltrs capacity Rotational moulded polythene water storage tanks in three layers (cylindrical vertical with close top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

Supply only 20/25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwedfor iron pipe fixed complete all as specified and directed .

S&F Gun- metal,globe or gate valves with iron wheel head,screwed both ends for iron pipes for 20 mm bore of pipe complete complete all as specified and directed .

S&F (in repairs) Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed by

S&F (in repairs) Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed .

Supply and fix in repairs Brass chromium plated tubular towel rail with hook, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

Supply and fixed in repair bib tap chromium plated, screwed for iron pipe or brass ferrule, 15 mm bore and fixed in repairs, complete all as specified and directed.

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15mm bore for wash hand basin complete all as specified and directed .

Supply only, PVC connection 15mm bore 450mm long hexagonal brass chromium plated nuts and washers on both sides complete as specified and directed.

Supply and fix shelf /corner glass diplomat assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply & fixing CP brass angle valve 15 mm complete all as specified and directed .

S & fixed in repair 15mm Stop valve in repairs , fancy type, chromium plated with long shank and cup (cncealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed .

S & F vitreous china wash hand basin, white, flat back, size 550 X 400 mm excluding taps, wash, chain and plug and procelain stopper but including brackets cutting for pinning in ends of brackets or erecting stand and waste coupling and waste pipe (half or full thread) min weight 32mm-45 Gms/40mm-60Gms) complete all as specified and directed.

S & F in repairs vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap, and to flush pipe, anti-Syphonge pipe,and incl trap set in lime concrete etc complete including making good to floor complete all as specified and directed.

S&F in repair for 10ltrs PVC valveless,syphonic action type flushing cistern low level white with inlet,ball valve,float and handle including brackets complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm sizewith or without swivel joints any size, including fixing to steel pipe or union complete all as specified and directed.

S & fixed in repair stainless steel kitchen plate rack 750 x 600mm of complete all as specified and directed.

S & fixed in repair stainless steel kitchen sink with drainage board of over all size 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm, 1 mm thick with plug washers and wastes ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

Demolition of concrete in ground floor, roof,pavings nexc 15 cm thickness including floor finishes like tiles if any of any description complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete 1:3:6, type C2 using 40 mm graded crushed stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even complete all as specified and directed.

M&L Water proofing treatment on RCC roof of (Multistorey Bldg) etc, comprising with the following operation & as specified here in below :-

Dismantling of brick tiles or terracing tiles single layer on roof complete all as specified and directed.

Demolition of mud in roof any thickness including plastering and leeping (whether full thickness removed or only part there of complete all as specified and directed.

M&L for cement concrete type B-0 ,1:2:4 (12.5 mm graded crushed stone aggregate) for roof Padding complete all as specified and directed.

M&L for 10 mm thick plastering in cement mortar 1:3 finished even & smooth with out using extra cement with water proofing compound complete all as specified.Note:WPC measured and paid seperately complete all as specified and directed.

BLANK

BLANK

M & L for preparation of newly plastered surface of roof including cleaning the surface by using wire brush/ pressure hose and applying high performance polyurethane liquid membrane roof casting cold applied in two coats @ 1.5 Kg/Sqm applied with spray/brush an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C 1305, shore a hardness of not less than 60as ASTM D 2240. The item includes epoxy prime applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instructions and sound engineering practice complete all as specified and directed.

BLANK

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit writing etc and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded crushed stone aggregate) as cooking platform/si etc complete all as specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all as specified and directed.

Use & waste of form work for fair finished flat surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L steel work in tubular trusses, railing, grills etc including special shaped washer etc complete using ERW or induction butt welded tube complete all as specified and directed confirming to IS 1161:1979 grade 240 complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5cum,getting out soft/loose soil returning in and ramming earth or broken earth or broken rubble mixed with earth around ,in layers n exc 25cm watering and removing surplus soil to a distence n exc 50 mtr and getting good surface complete all as specified and directed.

M&L plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete as in base of post /columns etc complete all as specified and directed.

S&F Framed wk as in guesset plate for framed truss , rafters rails braces etc complete, drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging or sliding with and including eithe hook and hinges or steel hanging door fitting etc of Fe 410 Gde 250A complete all as specified and directed.

Dismanteling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or painted complete all as specified and directed.

M & L plain cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & rough, as in sub base, complete all as specified and directed.

M&L screed bed or bedding layer of cement mortar (1:6) 20 mm thick for laying floor finises of tiles complete all as specified and directed.

M & L for with mixture of white and grey cement in equal pro portions Chequered cement concrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floor complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings etc complete all as specified and directed.

M&L brick work with old size fly ash brick on straight on curved on plan to any radious in full brick work in cement mortar 1:6 complete all as specified and directed.

Repairs to broken edges of roof projection , chajja, facia, Fins and simillars works girth n exc 45 CM with 15 mm thick plaster including cutting of reinforcement as required , dubbing coat in CM 1:3, required PCC 1:2:4using 12.5 mm stone aggregate up to 4th storey bldgs complete all as specified and directed.

BLANK

Taking down carefully old unserviceable point wiring of any type complete,switch socket 5 amps & power point etc including switches and making good distured surfaces of walls / ceiling etc complete all as specified and directed.

M & L point wiring for one light point/fan point controlled by one, one way switch using 1.5 Sqmm nominal cross sectional area multistranded copper conductor,FRLS PVC insulated unsheathed cable in and including 20 mm dia or higer size PVC concealed conduit and fittings with 1.5 Sqmm nominal cross sectional area used as continuous earth wire and connected to earth dolly including 3 mm thick metal flush boxes with 3 mm thick white hylem sheet and making neccessory electrical connection of Switches, sockets,regulators etc complete all as specified and directed for the followings-

All as per item No- 119 here in before but One light point or fan point controlled by one switch complete all as specified and directed.

All as per item No- 119 here in before but One bell or buzzar point controlled by one push button on the same circuit or independent switch complete all as specified and directed.

All as per item No- 119 here in before but One 3 pin socket outlet 5 amps on same board with other switches complete all as specified and directed.

All as per item No- 119 here in before but One 3 pin socket outlet 5 amps socket outlet independent but below the switch board of light point in the same vertical plane complete all as specified and directed.

All as per item No- 119 here in before but One light point controlled by 2 Nos two way switch complete all as specified and directed.

M & L for point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC concealed conduit of adequate size with all fittings and accessories including 3 mm thick metal flush boxes with 3 mm thick white hylem sheet complete including FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one 16 Amp socket outlet on independent board complete all as specified and directed.

S & F switch piano flush type one way 6 Amps complete all as specified and directed.

S&F switch piano, flush type, one way, 16 Amps complete all as specified and directed.

S & F switch piano flush type 2 way 6 Amps complete all as specified and directed.

S & F socket outlet 5 pin, 6 Amp flush type complete all as specified and directed.

S&F socket 2 in 1, 3 pin, 5 and 16 Amps flush type complete all as specified and directed.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed.

S & F stepped type electronic fan regulator flush type complete all as specified and directed

S & F bell push flush type 5 Amp complete all as specified and directed.

Supply & fix bell /ding dong 230 volts Ac single pole complete all as specified and directed

Taking down Old unserviceable sub main wiring any size complete all as specified and directed.

M & L for sub main wiring with two run of 6.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including concealed PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB complete all as specified and directed.

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required complete all as specified and directed.

S&F epoxy powder coated MCB, DB, double door TPN horizontal 4 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and directed.

S&F MCB, TPN ,63 A, 415V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified and directed.

S & F MCB SP 40 Amps, 230 Volts C curve 10 KA, including necessary connection complete all as specified and as directed.

S&F epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and directed.

S & F MCB SPN 32 Amps, 230 Volts 'c' curve10 KA, including necessary connection complete all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position complete all as specified and as directed.

S & F lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Taking down old unserviceable light fitting any type, complete all as specified.

Supply and fixing indoor luminare batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20 W incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and directed.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including testing complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm including testing complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, hermostate,NRV, connection piece etc complete all as specified and directed.

S & F of chromium plated stop cock with brass spindle & with crutch or butterfly handle screwed down high pressure suitable for 15 mm bore GI tubing complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia. Iron pipe or for brass ferrule and fixed complete all as specified and directed.

S& F steel water tubing 15 mm bore galvanised medium grade with all fittings and fixed in wall , ceiling or laid in floor in new position as required at site complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soil) n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Taking down Old unserviceable cable of any Type any size complete all as specified and directed.

M & L for sand cushioning to underground cable with clean dry river sand complete all as specified and directed. Note:- Punned thickness only shall be measured & Paid.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sq mm 3½ core complete all as specified and directed.

Supply & Laying of sub class 'B'bricks locally available best quality laid flat (length of bricks laid across the length of cable) in tranches for protection of U/G cable complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Taking down Old unserviceable MCCB of any Type any size complete all as specified and directed.

Supply and fix incomming MCCB for existing panel fix 4 Pole MCCB 350 Amp, 50 Hz, 415 V with rupturing capacity 36 KA complete all as specified and directed.

Supply and fix Out going MCCB for existing panel 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 36 KA complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying a coats of synthetic enamel paint complete all as specified and directed.

S & F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius build in cement mortar 1:4 in half brick wall complete all as specified and directed.

S & F auto closing hydraulic soft closing chrome finish stainless steel hinge openable at 110 degree complete all as specified and directed.

S&F 100 mm long stainless steel grade -304 handle fancy type polished bright chrome finish complete all as specified and directed.

S&F in repair 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in pane each pane complete all as specified and directed.

S&F in repair 3.00 mm thick sheet glass,ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each complete all as specified and directed.

S&F framed work such as grills greeting etc with ends of bars,shouldered and/or riveted or forged into spikes,framed guard/bars etc complete all as specified and directed.

Taking down and re-fixing of ceiling fans ,hanging rod ,sealing cable end ,dismantling blades and removing fan etc complete all as specified and directed.

Taking down and re-fixing of electric energy meter complete all as specified and directed.

A ONE ENGINEERING

Channa Brothers and Co.

R.K.ASSOCIATES

jayanti associates

JAY DURGA TRADING COMPANY

M/S J J ENTERPRISES

HI TECH COLONISERS PRIVATE LIMITED