MID/AN/129

Fabrication of steel shed for installation of DG set and other allied accessories. The job involves fabrication of CGI sheet shed of (10’x 10’ x 10’) by erection of M.S channels (ISMC 125mm) at corners of required length including embedding in 2’deep RCC blocks by providing/ laying and filling block with 1:3:6 cement concrete mix. with 1sq. feet M.S plate welded at its bottom end and then properly grouting. Creating of structure by welding Angle iron (AA 50x6mm) at the top roof end to end. Also welding of iron members vertically and horizontally for all the three sides with the intermediate angle iron members.The job includes welding of sufficient no. of angle iron (AA 50x6mm) length at equal spacing at the top for creating the super structure of roof for laying and fixing of CGI sheets with nuts/ bolts, fastening etc. Also welding of angle iron (AA 50x6mm) with the M.S Channel members at the corners. Welding vertically sufficient no. of M.S angle iron members. The job also includes providing and welding of sufficient no. of M.S Flat length on the roof and side walls wherever required for extra strength of super structure. Providing and fitting of required no of Corrugated sheets with steel hooks on the super structure created for roof and sides. The job also includes fabrication of folding door out of corrugated sheets and angle iron (AA 40x3) with folding arrangements using hinges at least at two points and fitting arrangements. Flooring of shed by Earth work in excavation in all kind of soil inside steel shed. Providing/ laying of cement concrete in 1:1.5:3 ratio (M20 grade) in position for flooring and then Plastering of flooring of Steel Shed. Complete job includes the cost of material, carriage charges, hire charges of tools, tackles and labour charges for skilled/semiskilled labour deployed at site. Complete Job

M/s RK Elect. Mech. Engg and fabrication works

M/S K S ENGG WORKS