Fitting and Fixing of Cascade fountain at Maharaj Sagar Const. of Food Coat in eastern side of Maharaja Sagar with improvement and beautification of Maharaja Sagar in Titlagarh Municipality.

Supply fitting and fixing of slow sequance flooting fountain (water cascad model is so design to creat a gress Christmaxtree) water formation through programme sequential water movement over exiting water bodies. The fountain operates on FRP floating platform and produces visually appealing cascading jet effects enhanced with synchronized RGB lighting etc and complete with all respect as per engineering -in -charge with following key features. 1.water pattern and floating structure is show designed 1 no. of 6 inch dia FRP floater with one no. of 3 inch cascade centre and five nos. of 4 inch dia FRP floater of 5 nos. of 1.5 inches cascade surrounding centre. with heavy duty, UB resistance and corrosion proof floater. 2. fountain is installed at exiting pond with proper enchoring provided. 3. The water effect of fountaion is show designed as to operate through to sequansitial programme control system with minium 15 ft height and maximun 25 ft. height. 4. The pumping system of fountain suitable for continues duty operation with 1 no. of 10 HP 3 phase submersible open wall pump for centre casecade nozzle and 5 nos. 5 HP 3 phase submersible open wall pump for surrounding to centre casecade nozzle made of Kirlosker/ Lubi or equvalent. 5. Lighting syetem:- Fountain lighting system fitted with 26 nos. of 12 watt RGB under LED light ( 6 nos. for center nozzle and 20 nos. for surrending nozzle. The lighting designing with protection class of IP 68 with stainless steel casing pipe. 6. Elctrical Control Pannel made of 16 Gauge water proof electrical pannel, fitted withrequired quantity of MCB, Bush Bar, contractor, relay, SMPS, preventer, voltmeter, ammeter, Capacitor, CT Coil, Indicator, Lamps, Connectors, Push Buttons, cable Glands, RGB Controller, Panel Box, Name Plate, Locking Arrangement and supporting stand with 6 nos. of VFD based programmable control system. 8. The cable should must make with finolex/ Havells/ polycab brand i. for pumps 4 sq. mm. 3 core submersible cable. ii. for lights 2.5 sq. mm. 4 core submersible cable along with required quantity of UPVC pipeing and fittings.