Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹43.5 Laccepted-finance | ₹43.5 L | accepted-finance |
Tender Value
₹51.7 L
EMD Value
₹1.0 L
Closing Date
13 Apr 2026, 11:00 pmClosed
Rural Drinking Water and Sanitation Department
RUPLA NAIK S
Construction of Proposed MRF
RWSSD/2025-26/OW/WORK_INDENT9980
RWSSD/2025-26/OW/WORK_INDENT9980
Open
Other Works
Two Tender Document System(Two Cover)
RWSSD Division Office Shivamogga
₹1,300
₹1.0 L
13 Apr 2026
2 Apr 2026
15 Apr 2026
9 Apr 2026
Construction of Proposed MRF Centre Material Recovery Facility 3TPD at Konandur illage of Konandur Gram Panchayath of Thirthahalli Taluk in Shivamogga District
Clearing and grubbing road land including uprooting rank
vegetation, grass, bushes, shrubs, saplings and trees girth up to
300 mm, removal of stumps of trees cut earlier and disposal of
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such similar works in all kinds of soils, as per drawing and tec...
Providing and laying in position plain cement concrete for levelling course for all works in foundations. The granite/trap/basalt crushed coarse aggregares abd fine aggregates as per relevant IS Codes...
Providing and laying in position Reinforced cement concrete for all
Foundation works. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine
Providing and laying in Reinforced cement concrete for all Sub structures of buildings, irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50m height...
Providing and laying in Reinforced cement concrete for all Sub structures of buildings, irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50m height...
Supplying, Fitting and Placing TMT Fe 550 / 550 D & above Reinforcement in Including cost of all materials ,labour cleaning straightening cutting bending hooking lapping /welding joints tying with bi...
Providing Size Stone masonry with hard stone in foundation & plinth
with Cement mortar 1:6 (1 cement : 6 coarse sand) (1 Cement : 6 coarse sand) (P.No. 9/5.4/volume 2 SR/2023-24).
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc, in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x200x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS...
Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S gusset plates at the junctions and corners, all necessary fittings complete. Including applying a priming...
Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel w...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer), of 1st quality conforming
to IS : 15622, of approved make, in all colours, shades,...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Ner work (two coats) over and including water thinnable priming coat with cement primer after th...
Supplying and fixing rolling shutters of approved make, made of required
size M.S. laths, interlocked together through their entire length and
jointed together at the end by end locks, mou...
Extra for providing Manually operated Bevel Gear Box for operating rolling
shutters including cost of materials, labour, usage charges of machinery
complete as per specifications and as per directio...
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate sections and other sections of approved make ...
Providing and fixing Aluminium Turbo ventilator complete as per technical
specificationsNon Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not l...
Providing & fixing corrugated G.S. sheet roofing including vertical /
curved surface fixed with polymer coated J or L hooks, bolts and nuts 8
mm diameter with bitumen and G.I. limpet washers or with...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Supplying heavy guage PVC conduit pipe 25mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceili...
Supplying and fixing PVC/ metal conduit Deep junction box (P.N0.3/1.5.2/Electrical SR/2023-24) 25mm deep Junction box
WIRES & CABLES. Point wiring using Copper wire without switch. point wiring using copper wire with switch supplying wiring adopting and loop system in existing conduit \casing capping using 1100V grad...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer coat of primer of approved make etc. 9 (P.N0.2/1.4....
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P.N0.9/3.6.1/Electrical SR/2023-24) ...
Supplying and fixing surface / flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Bricks/C.C wall, including necessary rawl plugs, Machi...
Supplying And fixing / replacing of 6/16/32A electrical accessories on existing switch board (P.NO.10 to 47/3.14.6/Electrical SR.2023-23) 6A Lamp
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70% lumen manitenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0....
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary cIA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 2...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS037401979 and with double ball bea...
Suppying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit ….The pit sho...
Providing and laying flooring with burnt stone slabs 10 cms thick, rough chistle dressed on sand bed 7.5 cms to 8 cms thick and pointed with cement mortar 1:3, , including cost of materials, sand, lab...
supplying & errection of RCC rings for well steining of 0.3 mtr depth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacteded inc...
Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually cont...
KSRB 13-11.1 : Providing and placing on terrace (at all floor levels )polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet o...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works toher than foundation in all kinds of soils &upto depth not exceeding 300mm as per drawing and tec...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanical mixplant carriage of mixed Material ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
LINE OF CREDIT FORMAT SMG.docx
Instructions to Tenderers • 0.01 MB
KW 3 9980 THT.docx
Tender Document • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .