PROVN OF MISC B/R WORKS AT NEW WAPTI AREA AT AFSSR

Amount

B/R PORTION

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Dismantling of stone slabs of any description or thickness in floors, approaches, dado/Partitions etc complete all as specified and as directed

Demolition of brick work or stone boulder masonery including all quoins arches, plllars etc built in cement mortar and including removal from the site complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

Taking down shutters of any description of size exceeding 1 Sqm and not exc 2 Sqm each complete and refixing in the same opening after erasing and adjustment complete all as specified and as directed.

M & L for Non Skid jointless ceramic printed scratch proof and stain resistant coloured tiles 600x600 x 9-10mm thick as in floor etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed.

M & L for Non Skid jointless scratch proof and stain resistance ceramic printed coloured tiles 600x600 x 9-10mm thick as in skirting / dado etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed.

M & L for Non Skid ceramic printed coloured jointless tiles 400x400x 7 to 8 mm thick , as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M&L for machine cut and mirror polished kota stone ( size not less than 55cmx55cm for flooring & for tread of steps will be in one piece) slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat of dado/skirting etc complete all as specified and as directed

M&L for Glazed ceramic printed coloured tiles 300mmx 450mm , 6 to 7 mm thick, as on vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match incl cutting edges etc complete all as specified and and as directed

M&L for machine cut and mirror polished kota stone slab 18-20 thick in riser of steps(in one piece), skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed

M&L for rounding to edges of stone(granite/kota) slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

S&F 75mm bore PVC (SWR) Junction single, (single Y/T) equal or unequal complete all as specified and as directed by Engineer-in-charge

S&F 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with dash true nut and bolt complete all as specified and directed by Engineer-in-charge.

S & F 75mm dia PVC (SWR) bends/shoe with rubber rings joints fixed as required complete all as specified and as directed

M&L for TMT bars 6 to 8 mm dia dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L for brick work with sub class 'B' bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings,shelves,chajjas incl edges and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete al! as specified and as directed.

M&L for RCC 1:1.5:3 type A1 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves,chajjas,facia etc complete all as specified and as directed

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in door and windows frames any size single or double rebated, as required etc complete all as specified and as directed

M&L for mild steel framed work as in grills, grating, doors, etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed baluusters wals ways, railing framed work of water tanks and similar work etc complete all as specified and as directed

S&F mild steel, plain black sheet 1.6mm thick in door shutters, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed

S&F 2nd class hard wood facrory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S& F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze.etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) etc complete all as specified and as directed

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS Squre Tube in opening etc complete all as specified and as directed

S & F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail, and. bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together'with solvent cement in the frame a site as per specification and drawing etc complete all as specified and as directed.

Supply and fixing mild steel cup board 60cm depth & with sides. back & 3 shelves & partition, top bottom & mild steel door shutter with two leaves with frame, incl necessary fittings made out of 18 gauge MS sheet with locking arrangement and handle etc with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Front face of cupboard to be measured and paid) complete all as specified and as directed.

S&F rolled formed galvanised prepainted steel section window/ventilater section of frame 72x55 mm fixed to wall or concrete surface with MS hold fast (30X5mm section) 150 mm long made of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanozed as per IS 277 with zinc of 120 gms/sqm.) glazed shutter and wire gauge shutter prepare to receive wire mesh to the shutter{double door shutter) with total coated thickness of 0.6 mm including powder coated grill / guard bars made of square bars 10mm dia at 150mm c/c ' horizontal spacing fixed in MS flat frame (30x5mm) fixed to windows frame with screws incl 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessary fittins and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed Type-Eco 4000 series ref drg no CEAF/STD-191/2014 SH1/2&2/2 .

S&F factory made PVC 5.5mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure for back of kitchen cabinets complete all as specified and as directed by Engr-in-Charge

S&F factory made PVC shutter/Shelves in required size and shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain / coloure for kitchen cabinets complete including required frame work with panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as specified and as directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, heavy weight, cold rolled mild steel and fixed etc complete all as specified and as directed

S&F 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

S&F Double legged floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed.

S&F in repair Frog hinges/slip on cabinet hinges by making adequate hole in 18 mm board from inside and fixed to cupoard shutter and frame by screw, complete all as specified and as directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610mm long and MS brackets complete all as specified and as directed. ... chromium plated w..aste fitting and PVC waste pipe 610 mm long and MS brackets com..plete all as specified and as directed

S&F in repair sinks made of stainless steel 1 mm thick for kitchen with plugs, waste pipe, washers; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe overall size 495mmx 420mm boul size 410mm x330mm x 160mm complete all as specified and as directed.

S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm white with cast iron 'P' or 'S' trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed

S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed

S&F Brass Chromium Plated Central Hole Mixture 15mm bore (dia) without Popup Waste System with 450mm long provided Hoses including Flange suitable for Wash Hand Basin , complete all as specified and as directed.

S&F Brass Chromium Plated Mixture Unit Hot and Cold for Shower suitable for fixing 15mm bore (dia) Pipe including flange complete all as specified and as directed

S&F Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges , complete all as specified and as directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ur capacity white with inlet ball . valve, float, flushing bend & handle including brackets, suitable for both, Indian Type Water Closet & European Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed

S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe including flanges complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe orfor unions fixed for 15 mm dia bore pipe including flanges complete all as specified and as directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed

S&F in repair for 75 mm bore out let floor trap of cast iron with stainless steel gratings including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) elc complete all as specified and as directed.

S&F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) concealled/ surfaced complete all as specified and as directed

S&F tubes medium grade galvanized with all fittings & fixed concealled/surfaced complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F in repair for 50 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed

S&F in repair for 75mm bore out let Nahani trap of Cast iron with stainless steel grating including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.

Taking down PVC/cast iron pipes any bore including fillings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts, wells, cesspits, manholes, pier holes, cable laying.sewage/water lines etc complete and getting out all as specified and as directed.

Returning filling in including spreading leveling watering and well ramming in layer not exc 25cm thick complete all as specified and as directed

S&F in repair 50 mm cast iron cowls complete all as specified and as directed

S&F in repair 100 mm cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed

S&F in repair 100 mm cast iron Sockets (double, collars) complete all as specified and as directed

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx75cm (weight not less than 8kg)complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts in patches in CM 1:3.finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering in two coat as 10mm thick in CM 1:4 as dubbing coat over and including applying anti corrosion chemical coating upon exposed reinforcement and 2nd coat as 5 mm thick in CM (1:3) finshed even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified cind as directed

M&L for Washed stone girt plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per sqm, top layer 15mm cement plaster 1:1/2 : 2 ( 1 Cement : 1/2 coarse sand : 2 Marble stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the marble stone chippings complete all as specified. The groove shall be 15mm wide and 15mm deep in the top layer of washed stone girt plaster as per approved pattern using wooden battens, nailed to the under layer including removal to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specification and direction of the Engineer-in-Charge. Note:- Area includes in this items upto 4 stories of building, necessary scaffolding and arrengments are deemed to be included in the lump sum rates.

M&L for rendering 10 mm thick in CM (1:3) with Water proofing compound on Chajja / Facia over 20mm thick in CM 1:4 as dubbing coat etc complete all as specified cind as directed Note:- Area includes in this items upto 4 stories of building, necessary scaffolding and arrengments are deemed to be included in the lump sum rates.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for cement concrete1:2:4, Type B1 using 20mm graded stone aggregates as in coping, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for two coats of white wash on ceiling on old plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparing newly plastered surface & applying two coat of oil bound distemper white or any tint over a coat of primer etc) complete all as specified and as directed .

M&L for preparing newely. plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed

M&L for preparing Old plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

M&L for Preparation of new steel and iron surface of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed

S&F mild steel helical door spring 150 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound@ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet etc complete all as specified and as directed Note: WPC will be measured and paid separtely under respective items.

M&L for two coat of painting with Dr Fixit fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:4:8 type D-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, complete all as specified and as directed.

Removing excavated soil / dismantled / demolished debries / Materials to a distance exc 1.50 Km and depositing the debris outside of MOD land where directed, complete all as specified and as directed.

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing debris to a distance exc 500 mtr but not exc 1.50 Km complete all as specified and as directed

Disconnecting existing tank of capacity exc 250 ltr but not exc 500 !tr, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position incl Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.complete all as specified and as directed

Dismantling of existing tank of capacity exc 250 ltr but not exc 500 ltr.water tanks and removing to store and S&F in repair rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) of 500 liter capacity with and including 20mm dia PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed

Re-fxing of old steel tubing and connection in.new or old position (walls, ceiling, floor) etc complete all as specified and as directed

M&L for preparing by complete removal of existing plastered surface and applying two coat of oil bound distemper white or any tint over a coat of primer etc) complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 25 mm dia bore and re-fxing of old steel tubing and connection in new or old position (walls, ceiling, floor) etc complete all as specified and as directed.

S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed complete all as specified and as directed

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed complete all as specified and as directed

Fixing only as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacturer instruction complete all as specified and as directed Note: (i) WPC will be measured and paid separtely under respective items. (ii) Rates includes to carry out the work on roof slab up to fourth stories building and nothing extra shall be admissible on this account.

M&L APP based polymeric membrane minimum weighing 3.6 kg / Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Wt not less than 150 gms / SqM) with 15cm longitudinal & horizontal over lapping and joints finally pasted with thermo - fused withblow lamp laid over a coat bitumen @ 1.20 kg / Sqm over bituminous primer 0.3 ltr per Sqm as per APP manufacturer instructions etc complete all as specified and as directed.

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 40 mm dia bore pipe (including in short length) as in spout pipes etc complete all as specified and as directed

Dismantling Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed

Demolltion Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only part thereof) complete all as specified and as directed

M&L for cement concrete tiles 25cm x 25Cm x22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment on roof over and including 15 mm thick cement screed in CM 1:4 complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge

S&F in repair 75 mm cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed

S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and directed by Engineer-in- Charge.

S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and directed by Engineer-in- Charge

S & F for 75 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) complete all as specified and as directed by Engineer-in-Charge

S & F for 75 mm bore cast iron bends of (any radius), dimnishing pieces or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge

S & F for 100 mm bore cast iron bends of (any radius), dimnishing pieces or taper (larger bore measured) complete all as specified and as directed by Engineer-in-Charge

S & F for 100 mm bore cast iron bends of (any radius), dimnishing pieces or taper (larger bore measured) fitted with oval access door complete all as specified and as directed by Engineer-in-Charge

S&F in repair 100 mm bore centrifugally cast iron branch piecee (Sand Cast Pipe),with epoxy coated inside & out side complete all as specified and as directed by Eng-in-Charge.

S&F 100 mm bore shielded coupling for centrifugally cast (Sand Cast Pipe) iron pipe SS304 Grade coupling with EPDM rubber gasket complete all as specified and directed by Engr-in-Charg

S&F Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm bore shielded coupling for centrifugally cast (Sand Cast Pipe) iron pipe SS304 Grade coupling with EPDM rubber gasket complete all as specified and directed by Engr-in-Charg

M&L for Black granite (of any type} stone slab 16 to 18mm thick machine cut and machine polised, as in , Kitchen platform etc jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of graniite stone including grinding the edges half round and polishing including pinning in brick / concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and as directed

M&L Marble work 15-18mm thick (table rubbed and polished} in floor and like, in cement mortar (1:4} including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of white type fixed as in strips in floonng of kota stone etc complete all as specified and as directed.

M & L for 1.5mm thick wall care putty on wall complete all as specified and as directed

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/hardstanding etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for Chequered cement concrete coloured tiles 30cmx30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

E/M PORTION

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) complete including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets etc including removing material to store for keeping in safe custudy and making good disturbed surfaces of walls floors etc complete all as specified and as directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/battens etc complete all as specified and as directed.

Taking down unserviceable MCB DB's/ Geyser box of any size/rating complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grade cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers Including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one light point controlled by one switch all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grade cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers Including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one fan point/Exhaust fan controlled by one switch all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1 5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grad cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers Including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one bell/buzzer point controlled by one push button on the same board with other switches or independent all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1 5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grad cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers Including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one 5 pin socket oulet 5/6 amps on same board complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grade cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers Including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified one 3 pin socket outlet, 5 Amps, independent complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grade cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers Including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one light point controlled by two 2-way switches, complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 2.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH cable 1100 volts grade confirming to IS: 694 drawn in and including medium grade concealed PVC conduit confirming to ISI marked not less than 25mm dia with concealed sunk-in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washer including single core stranded copper conductor 4 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one 6 pin socket outlet two in one 16/6 Amps on an independent board. (for geysers point) Note: 1) For item No 2.004 to 2.010, Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. No Extra payment will be done on this account

Note: 1) For item No 2.004 to 2.010, Rates are deemed to be included for cutting / chasing to make concealed of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. No Extra payment will be admissible on this account

Supply and fix switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and as directed.

Supply and fix switch piano, flush type single pole, two way, 5 Amps, 240 volts complete all as specified and as directed.

Supply and fix bell push flush type single pole, one way, 5 Amps, 240 volts complete all as specified and as directed.

Supµly and fixing socket outlet 2 in 1, 3 pin 5 Amps, complete all as specified and as directed.

Supply and fix switch socket combination 5 Amp/16 Amp 5 in 1 flush type complete all as specified and as directed.

Supply and fix ceiling roses, 3 terminals, PVC/Polycarbonate, isolated body complete all as specified and as directed.

Supply and fix in repairs stepped type electronic fan regulator flus type on the cxistmg phenolic laminated sheet etc as required complete all as specified and as directed

Supply and fixing in repairs calling bell ding dohg, AC 230 volts, single pole complete all as specified and as directed

Supply and fix in replacement of 20 watt (4ft long) decorative box type fitting with blue coloured for LED tube etc complete with all accessories internally pre-wired and includlng connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block and testing complete all as speicified and as directed.

Supply and fix in replacement of 10 watt (2ft long) decorative box type fitting with blue coloured for LED tube etc complete with all accessories internally pre-wired and includlng connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block and testing complete all as speicified and as directed.

Taking down ceiling fan (C/F of any size/make,) cleaning its dust properly oiling and hanging the same back to its original position includlog connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge. Note :- (i) The spares like cotter pin, nuts & bolts, rubber bush & hooks etc defective/damage deemed to be replaced and make the ceiling fans functional. The rates quoted for the same deemed to be included for the above job.

Taking down exhaust fan and re-connecting up including provision of cable from ceiling rose to exhaust fan after cleaning all dust complete all as specified and as directed. Note :- (i) The spares like nuts & bolts etc defective/damage deemed to be replaced and make the fans functional. The rates quoted for the same deemed to be included for the above iob.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm dia by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion complete all as soecified and as directed.

Supply and fix in replacement of LED building light luminaire 30 watt, pressure die cast aluminium housing with heat resistant toughened glass & IP66 protection complete all as specified and as directed.

M&L for in replacement of bracket made from GI pipe light grade 25 mm bore bent to shape as required at site for street light fitting 1.2 mtr in length and fixed on wall/pole including necessary MS clamps, nuts, bolts and washers including welding and painting complete all as specified and as directed

Supply and fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F LED lamp 12 watt complete all as specified and as directed.

Supply and fix in replacement MCB, DB , SPN 8 way suitable for single phase 240 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCB's single/double pole complete all as specified and as directed.

Supply and fixing in replacement of MCB signle pole 6-32 Amps 230 volts 'C' series complete all as specified and as directed.

Supply and fixing in replacement of MCB single pole and neutral 40 Amps 230 volts 'C' series complete all as specified and as directed.

Supply & fix in replacement of SPN enclosure with two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified and as directed.

S&F submain wiring with unsheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one run of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB complete all as specified and as directed. Note :- (1)Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. (2): Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit

Note :-Schedule of credit Rs 611072.00 will be deducted from total quoted amount while calculating contract sum.

M/s Innovative Coolings and Constructions

Adhunik Builders

M/S ANIL KUMAR