Under Rajiv Gandhi Ward No. 1, in Vivek Khand-2, work involving paver finishing and shoulder improvement for the roads and all connecting lanes specifically covering the stretches from House No. 2/156 to 2/16, 2/20 to 2/57, and 2/58 to 2/30.

Providing and Applying Tack coat with bitumen pressure distributor at of 0.35 kg per SQM on the prepared bituminous surface clean with mechanical broom.

Wet mix macadem (Plant Mix Method) . Providing & laying spreading & compacting graded stone agg. To wet mix macadem specification including premixing in mechanical mix plant carriage of mixed materials by tipper to site laying to uniform layers with paver in sub base/base coarse on well prepared surface & compacting with vibratory roller to achieve the desired density.

Providing and laying dence graded bituminus macadam with higher capacity HMP using crushed aggregates of specified grading premixxed with bituminus binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix work site, laying with a hydrostatics paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achived the desired compaction as per MORTH specifcation clause no-505 complete in all respects.

BC with Waste Plastic additive: Providing and laying Bituminous concrete using crushed stone aggregates of specifiled grading. premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equlped with electronic sensor to the requlred grade, evel and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-charge

P/L of hot thermoplastic compond 2.55 mm thick including reflectorising glass beads@ 250gms per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 3-2015 the finished surface to be level uniform & free from steaks and holes.

Dismantling of brick work manually /by mechanical means including stacking of sevicable materialswith 50 metreslead as per direction of Engineer-incharge in cement morter etc all complete…………..

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

E/W in Surface excavation by manual not exceeding 30 cm depth etc all complete

1:5:10 (1 cement : 5 coarse sand (zone-III) derived fromnatural sources : 10 graded stone aggregate 40 mmnominal size derived from natural sources).