WBPWD/AE/RESD/eNIT-03/2025-26

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab/Finolex/Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Legrand Myrus/Anchor Roma/Crabtree) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. Average run 8 mtr [PWD/GS Page: E - 24 Item: 1 ]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Polycab/Finolex/Gloster) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Legrand Myrus/Anchor Roma/Crabtree) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish On board [PWD/GS Page: E-20 Item: 3 ]

Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket & 1 nos. 6/16 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch & 1 nos. 6/16 A, 3 pin Modular type switch (Legrand Myrus/Anchor Roma/Crabtree), without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall/on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[PWD/GS Page: E-17 Item: 1, 3, 4]

Supply & Fixing 240 V, 1 nos. 6 A, 3 pin Modular type plug socket & 1 nos. 6/16 A, 5 pin Modular type plug socket (Legrand Myrus/Anchor Roma/Crabtree) with separate 1 nos. 6A Modular type switch & 1 nos. 6/16 A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-17 Item: 1, 3, 4]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Legrand Myrus/Anchor Roma/Crabtree) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire.[PWD/GS Page: E-18 Item: 9/b]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Legrand Myrus/Anchor Roma/Crabtree), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [For AC ] [PWD/GS Page: E-17 Item: 5a]

Supply & Fixing 240 V, 25 A, Modular type starter (North West/ Crabtree/L&T) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc [PWD/GS Page: E-19 Item: 17]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Polycab/Finolex/Gloster) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 2 x 4 sq mm + 1X 2.5 sqmm [PWD/GS Page: E-9 Item: 1 ] [HTPN DB to AC Point]

Do………………Do………………..Do………….2 x 2.5 sq mm + 1X 1.5 [For Power Socket]

Do…………………..Do…………………Do……………...3 x 1.5 sq mm

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 2 x 4 sq mm + 1X 2.5 sqmm [PWD/GS Page: F-5 Item: 9 ]

Do………………Do………………..Do………….2 x 2.5 sq mm + 1X 1.5 [For Power Socket]

Do…………………..Do…………………Do……………...3 x 1.5 sq mm

Supplying and fixing 20 mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [PWD/GS Page: E-16 Item: 7/a ]

Supply & Fixing 240 V, 1200 mm, 18/20 W, 110 lm/W Double LED light fitting incl. LED Tube light (Fibre Body), suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Supply of light fittings/Light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 17 ] [Make Havells/ Wipro/Crompton/Bajaj/Philips TMC 502 2XTLED 22W/18W 865 T81-2100 lm] with 5 yr warrenty

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [PWD/GS Page: D-14 Item: 29 ]

Supply & Fixing 240 V, <50 W, 320 RPM, 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire.(Make - Orient/Crompton/Havells) [Supply of Fan - Non-Schedule Item, Fixing of Fan - PWD/GS Page: C-3 Item: 21/a ]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Anchor Roma/Crabtree/Legrand) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [PWD/GS Page: E-18 Item: 10]

Supply & Fixing 240 V, 1200 mm, 18/20 W, 110 lm/W Master LED Tube light (Fibre Body) in existing fixture [Supply of light fittings/Light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 17 ] [Make Havells/ Wipro/Crompton/Bajaj/Philips 865 T81-2100 lm] with 5 yr warrenty]

Earthing Installation – with Pipe Electrode : Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [PWD/GS Page: G-1 Item: 1]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below : By TATA-Medium GI pipe [PWD/GS Page: G-1 Item: 2/a]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe. [PWD/GS Page: G-2 Item: 3/a]

Earth Busbar Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [PWD/GS Page: G-2 Item: 4/c]

Earth Continuity Strip Connecting the equipments to earth busbar including S & F 20 mm x 3 mm Galvanised (Hot Dip) MS Flat on wall / floor with GI saddles as required and connection to equipments with incl. drilling holes, bolts, nuts, washers etc. [PWD/GS Page: G-3 Item: 5/c]

Note:- Labour welfare Cess @ 1% and GST @ 18% on Bill amount will be deduct.

RIK ENTERPRISE (BID ID -6451924)

M/s Joy Durga Electric Repairing Shop (BID ID -6432938)