Supply and Fabrication of MS Structural Parlour at MTC Bus Terminus of Kilambakkam

Amount

Supply and fabrication of MS structure for Parlour including the cost of all to site and all labour charges and as per standard specifications and as per design etc complete.

Supply and fixing of 10 mm Cement Fibre panel with suitable reinforcement , welded support, required nut & bolt to make the side joints as removable or retrol fit type for structural Parlour including the cost and conveyance of all to site and all labour charges as per design etc complete.

Supply and fixing 18 gauge MS sheet panels for structural Parlour including the cost and conveyance of all to site and all labour charges and as per standard specifications and as per design etc complete.

Providing MS powder coated 0.47mm thick sheet roofing / side walling including the cost and conveyance of all to site and all labour charges and as per standard specifications and as per design etc complete.

Supply and fixing Steel Rolling Shutter [pull and push type with ISI monogram] of approved quality with MS laths 75 mm wide and 18 gauge thick to different sizes including all accessories like sliding grooves, shafts, springs, bearings, hood & locking arrangements and grouting the sides & top assembly with walls & beams, painting one coat of red oxide primer etc., complete as directed by the Federation officers and as per standard specification. Manually operated (upto 8 m² area)

Painting new iron work for window shutters, ventilators, iron grills, weld mesh screen with two coats of approved quality and colour of ready mixed synthetic enamel paint and scraping the surface with emery paper, in all floors etc., complete as directed by the Federation officers and as per standard specification.

Supply and Fixing of SS sheet for counter in kiosk of 304 grade 2R(BA) finish 2000x1200x1.00 mm size etc., complete as directed by the Federation officers and as per standard specification.

Supplying and fixing in position of Gypsum board FALSE CEILING ARRANGEMENTS with aluminium anodised ' T' Section and 'L' angle frame work of grid size 60x60cm with aluminium T section and 'L' angel of size 25x25x2mm thick and the same is supported @ suitable intervals by adjustable type 6mm dia MS rod with suitable threaded nuts suspended rods hung from ceiling at 100cm c/c in both directions and fixing 60x60cmx20mm thick thermocole in the grid so as to give a seat to false ceiling including painting the 6mm dia MS rod etc.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame workvertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supplying and painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (interior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers.

Supply and providing Vinyl stickers to support with "AAVIN" product printed on digitally with lamination to cover internal , external wall of kiosk external wall of the kiosk Including fixing with suitable polymer based adhesive , transportation labour charges.(LR)

Supply and laying of vinyl flooring including labour charges etc complete

Supply and fixing of SS Sink of size 600 mm X450 mm fixed with MS stand including material cost, labour cost etc complete as directed

GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.)

smart roofing private limited (BID ID -1212539)

MRP FIBRIL INDUSTRIES (BID ID -1209317)