Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC 19192 STREET NO 8 BIBI WALA ROAD OPPOSITE DAV COLLEGE BATHINDA PUNJAB PIN 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹1.3 Cr | L1 | Accepted-AOC The lowest bidder |
| 2 | L2₹1.3 Cr+₹5.5 L (4.32%)Rejected-AOC | ₹1.3 Cr+₹5.5 L (4.32%) | L2 | Rejected-AOC Other than the lowest bidder |
| 3 | L3₹1.4 Cr+₹7.9 L (6.12%)Rejected-AOC 546 14 JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | ₹1.4 Cr+₹7.9 L (6.12%) | L3 | Rejected-AOC Other than the lowest bidder |
| 4 | L4₹1.5 Cr+₹25.0 L (19.4%)Rejected-AOC KHASRA NO 145 GROUND FLOOR NEAR JAIN MOHALLA JATO KI CHOPAL VILLAGE KHERA KALAN NEW DELHI 110082 | NORTH | DELHI | 110082 | ₹1.5 Cr+₹25.0 L (19.4%) | L4 | Rejected-AOC Other than the lowest bidder |
| 5 | L5₹1.5 Cr+₹25.2 L (19.6%)Rejected-AOC 368 MAHESHPUR SECTOR 21 PANCHKULA HR 134112 | PANCHKULA | PANCHKULA | HARYANA | 134112 | ₹1.5 Cr+₹25.2 L (19.6%) | L5 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹1.3 Cr
EMD Value
₹2.1 L
Closing Date
27 May 2025, 6:00 pmClosed
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
SPL REPAIR TO ROAD FROM BLDG NO P-20 (AUDITORIUM) TO NALANDA HOUSE AND VARIOUS LACATIONS AND REPAIR/ MAINT OF BITUMINOUS CONCRETE ROADS AND ROAD FURNITURES AT RMS CHAIL UNDER GE (I) JUTOGH
2025_MES_705847_1
GE(I)/JUT-98 OF 2024-25
Open Tender
Civil Works
Item Rate
365 days
RMS CHAIL
CLASS B CATEGORY a (v)
7 documents required · 7 mandatory
₹1,000
GE (I) JUTOGH
₹2.1 L
Yes
19 Jul 2025
29 Apr 2025
29 May 2025
29 Apr 2025
27 May 2025
13 May 2025
29 Apr 2025 - 6 May 2025
Amount
M&L for repairing to pot holes of any depth, n exc 1sqm each incl sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30mm in depth, and making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg/10 sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder @0.03 Cum of premixed macadam), complete all as specified and directed.
M&L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc., complete all as specified and directed.
M&L for applying evenly a priming/tack coat using paving bitumen with bituminous primer using mechanical sprayer at 10 kg/10 sqm, complete all as specified and directed.
M&L for bituminous premix asphaltic semi dense concrete (Job mix formula) 40mm consolidated thickness with 5% binder content using paving bitumen of Grade VG 10 by weight of total mix, spread by means of mechanical paver, rolled and compacted to required camber and gradient with power roller 8 to 12 tonne to a uniform smooth surface, complete all as specified and directed.
M&L for providing 75 mm thick or less premix bituminous macadam (Using Job Mix Formula), with paving bitumen VG 10 binder content of 4% by weight of total mix, laid/ rolled and compacted to required gradient and camber with power roller 8 to 10 tonne to a uniform smooth surface, complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour white and yellow confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 100 mm thick, PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in road side berms, complete all as specified and directed.
S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed.
R. P. Suppliers and Construction Co. (BID ID -3305862)
M/S kuldeep kumar khullar (BID ID -3301178)
chankaya solutions (BID ID -3300573)
FIRE ENVO SAFETY ENGINEERS (BID ID -3300843)
surinder kumar jindal & bros. (BID ID -3301299)
M/s Super Trading Corporation (BID ID -3301074)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .