Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹11.3 L+₹29,523 (2.69%)Rejected-Finance | L2 | Rejected-Finance Higher bidder | |
| 3 | L3₹14.9 L+₹3.9 L (35.9%)Rejected-Finance | L3 | Rejected-Finance Higher bidder | |
| 4 | L4₹17.2 L+₹6.3 L (57.0%)Rejected-Finance RAHEJA NIWAS 243 GHORPADE PETH PUNE 411 042 | PUNE | PUNE | MAHARASHTRA | 411042 | L4 | Rejected-Finance Higher bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical Not recommended as personnel cheque received towards cost of tender forms |
Tender Value
₹19.5 L
EMD Value
₹39,000
Closing Date
16 Feb 2022, 6:00 pmClosed
SH A K SINGH SE CWE NAVY VASCO
CWE NAVY VASCO VASCO DA GAMA GOA 403802
REPAIR PAINTING OF ALL STEEL FURNITURE AT INS MANDOVI UNDER GE GOMANTAK VASCO
2021_MES_492060_3
85499/E8
Open Tender
Civil Works
Item Rate
180 days
CWE NAVY VASCO
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
GE GOMANTAK VASCO
₹39,000
Yes
11 Apr 2022
2 Feb 2022
18 Feb 2022
2 Feb 2022
16 Feb 2022
2 Feb 2022
Amount
Removal of following existing unserviceable components of various furniture items given below carefully without disturbing the adjoining parts and supply & fixing new components confirming to IS and as approved as mention below.All steel surfaces from inside and outside shall be given two coat of existing synthetic enamel paint over a coat of red oxide metal primer after tightening the joints, placing every part in tact. Note: Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE Gomantak Vasco including BSO's Furniture Yard and all as specified and directed.
Almirah Large Steel Half Hanging Half Shelf /Cadet steel (FD-114, FD/E6/MAP/18, WDF-49/07)
a) 3-Way locking system as per drg and as directed.
b) Handle as per drg and as directed.
c) Leg as per drg and as directed.
d) Door as per drg and as directed.
e) Shelf as per drg and as directed.
f) MS Lock as per drg and as directed.
g) MS Hinges as per drg and as directed.
h) Looking mirror as per drg and as directed.
j) Replacement of bottom as per drg and as directed.
k) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
Almirah Large Steel with shelves/Glazed (FD-67(M), FD-1031,FD-104)
a) 3-Way locking system as per drg and as directed.
b) Handle as per drg and as directed.
c) Leg as per drg and as directed.
d) Door as per drg and as directed.
e) Shelf as per drg and as directed.
f) MS Lock as per drg and as directed.
g) MS Hinges as per drg and as directed.
h) Glass as per drg and as directed.
j) Replacement of bottom as per drg and as directed.
k) MS clips for holding shelves as per drg and as directed.
l) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
Almirah Steel Medium with shelves (FD-1032, FD-67, FD-243, FD-350)
a) 3-Way locking system as per drg and as directed.
b) Handle as per drg and as directed.
c) Leg as per drg and as directed.
d) Door as per drg and as directed.
e) MS Hinges as per drg and as directed.
f) Shelf as per drg and as directed.
g) MS Lock as per drg and as directed.
h) Replacement of bottom as per drg and as directed.
j) MS clips for holding shelves as per drg and as directed.
k) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
Locker Bed side Steel (FD 1029)
a) Handle as per drg and as directed.
b) Leg as per drg and as directed.
c) Door as per drg and as directed.
d) Shelf as per drg and as directed.
e) Hasp & Staple as per drg and as directed.
f) MS Hinges as per drg and as directed.
g) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
Book Case Steel/ book shelf open large steel (FD-90,FD-1012,FD-1028,FD-69(M))
a) New Glass as per size and Drg and as directed.
b) Handle as per drg and as directed.
c) MS Lock as per drg and as directed.
d) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
Bed Hard with steel Frame (FD/E6/MAP/08 (R) )
a) 12mm thick ISI Marked plywood as per size and drg and as directed.
b) 18mm MDF Board for Head/Foot rest as per drg and as directed.
c) Legs as per drg and as directed.
d) Upper Long Rail as per drg and as directed.
e) Upper Short Rail as per drg and as directed.
f) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
g) Shoe as per drg and as directed.
Charpoy folding & Charpoy IP with plywood top (FD/MAP-II/01, FD-388 (R) )
a) 12mm thick BWR grade plywood confirmng to IS as per drg and as directed.
b) Legs as per drg and as directed.
c) Upper Long Rail as per drg and as directed.
d) Upper Short Rail as per drg all as specified and as directed.
e) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
f) Shoe as per drg and as directed.
Charpoy GI Ply top (FD-220)
a) New Long rail as per drg and as directed.
b) New Short rail as per drg and as directed.
c) New Legs as per drg and as directed.
d) MS Check nut as per drg and as directed.
e) Three-way elbow as per drg and as directed.
f) 150mm long bracket of angle iron 35 x 35 X 5mm as per drg and as directed.
g) 900mm long angle iron 35 x 35 x 5mm as per drg and as directed.
h) 12mm thick commercial BWR Grade ply as per drg and as directed.
Chair Computer / Revolving (FD/E6/MAP/01, TP)
a) Chair Base PVC with five wheels as per drg and as directed.
b) Arm as per drg and as directed
c) Caster Wheel as per drg and as directed.
d) Tapestry of seat/Back as per drg and as directed.
e) Hydraulic system of chair all as per drg and as directed
f) To fix nut and bolt of chair computer as required all as specifed and as directed.
Chair writing steel, Chair Visitor, Chair desklet (FD/E6/MAP/12, TP)
a) Arm as per drg and as directed
b) Tapestry of seat/Back as per drg and as directed.
c) Hand board made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with PVC beading all around as per drg and as directed.
d) To fix nut and bolt of chairs as required all as specifed and as directed.
e) Shoe as per drg and as directed.
Chair School with Hand Board/Chair with chromium pipe PU moulded (FD/E6/MAP/17)
a) Hand board made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with PVC beading all around as per drg and as directed.
b) PVC Seat in blue colour as per drg and as directed.
c) 25 mm Hollow steel pipe all as specifed and as directed.
d) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
e) Shoe for leg of chair all as per drg and as directed.
Chair CB Tubular with Arms (FD-75)
a) Seat made with 40mm thick cushion on 12mm thick plywood with rexin of good quality all as specified and as directed.
b) Back made with 40mm thick cushion on 12mm thick plywood with rexin of good quality all as specified and as directed.
c) Arm rest 2nd class hardwood all as per drg and as directed.
d) Shoe for leg of chair all as per drg and as directed.
e) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
f) Clits made out of MS flat bar 20mm X 3mm thick and 40mm long with a hole to fix the seat & back all as specified and as directed.
Table steel 900 X 900 X 760mm
a) Legs as per drg and as directed.
b) Stiffeners as per drg and as directed.
c) Shoes as per drg and as directed.
d) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
e) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg and as directed.
Table Office Clerk Steel (FD-84(M), FD-381)
a) Legs as per drg and as directed.
b) Lock of drawer as per drg and as directed.
c) Drawer as per drg & as directed
d) Stiffeners as per drg and as directed.
e) Shoes as per drg and as directed.
f) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
g) Top of table shall be made of pre laminated MDF board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg and as directed.
Table Office Officer Steel (FD-84(M),FD-1002,FD-1003)
a) Legs as per drg and as directed.
b) Lock of drawer as per drg and as directed.
c) Drawer as per drg and as directed
d) Stiffeners as per drg and as directed.
e) Shoes all as per drg and as directed.
f) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
g) Top of table shall be made of pre laminated MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg and as directed.
Table bed side steel (FD/ E6/ MAP/ 15(R) & FD-157)
a) Legs as per drg and as directed.
b) Top frame as per drg and as directed.
c) Top side of table shall be made of pre laminated MDF board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg and as directed.
d) Door as per drg and as directed.
e) Drawer as per drg and as directed.
f) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
Teapoy Varandah (FD-35, FD-255, FD/E6/MAP/17)
a) Legs as per drg and as directed.
b) Top frame as per drg and as directed.
c) Top shall be made of pre laminated MDF board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg and as directed.
d) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
Boxing Ring (TP)
a) 2nd class hardwood planks 30mm thick, finished size painted with one coat of wood primer and two coats of synthetic enamel paint fixed with suitable nut & bolt as per drg and as directed.
b) Angle MS 65x65x6mm all as specified and as directed.
c) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
Chair for life guard (TP)
a) 2nd class hardwood planks for seat & back 20mm thick, finished size painted with one coat of wood primer and two coats of synthetic enamel paint fixed with suitable nut & bolt as per drg and as directed.
b) GI pipe 3/4" for legs, steps all as specified and as directed.
c) Welding the joints including painting the welded parts to match with existing all as specified and as directed.
M&L for preparing all old painted surface and removing dents & bents if required of following items and applying two coat of synthetic enamel paint of TA GREY/OG/BLACK or Existing color and all external surface complete all as specified and as directed. Note : Work will be executed where the furniture exist in different User Units at OTM/Md Accns at INS Mandovi under the jurisdiction of GE Gomantak Vasco including BSO's Furniture Yard and all as directed by Engineer-in-Charge.
Almirah cadet steel with/without looking mirror (WDF 49/07, WDF 116)
Almirah Steel large (all type Glazed / with/without Shelves /1/2 H-1/2 S (FD 104 (M) ,FD 67, FD 114, FD/E6/MAP/18, FD 1031, FD 351)
Almirah Steel Medium (all type-with shelves/ Glazed /1/2 H 1/2 S (FD 104 (M), FD 243 ,FD 67, FD 1032M, FD-243, FD-350, FD/E6/MAP/18, FD 114(M) )
Bed Hard steel frame (FD/E6/MAP/08 (R) )
Book Case Steel (FD 104, FD 90(M), FD 356)
Book Shelf open steel all type (FD 69M, DB-4121)
Chair CB Steel with Arms (FD 75M)
Chair CB Steel without Arms (FD 75M)
Charpoy IP Hard Top (FD/E6/MAP-II/01)
Charpoy IP folding with ply top (FD-388)
Form with back/without back (FD 77, FD-78)
Locker Bed side Steel (FD 1029)
Rack shoe steel (FD/E6/MAO/02 (R) )
Rack Side steel three space /four space (FD 1023,FD 97)
Rack Stationary steel (FD 81)
Stool steel 305x305x510mm/760mm (FD 81)
Table Office Offr Steel (FD 84 M, FD 1003, FD 1002)
Table Office Clerk Steel (FD 84 (M), FD 1004,FD 1084, FD 381)
Teapoy Varandah (FD 35, FD 255, FD 383, FD/E6 /MAP/17)
Chair revolving/Computer (TP, FD/E6/MAP/01)
Chair visitor, Chair desklet (TP)
Boxing Ring (Set of 16 cubicles 4' x'4 x 4') (TP)
REETA ENTERPRISES
SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD
Mahesh Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .