Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.6 LAccepted-AOC C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹47.7 L+₹96,649.22 (2.07%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹48.1 L+₹1.3 L (2.86%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹48.5 L+₹1.8 L (3.78%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹49.0 L+₹2.2 L (4.78%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
REPAIR TO DRAIN AND CERTAIN ALLIED WORKS AT ZONE A SEVOKE MIL STN UNDER GE SEVOKE ROAD
2023_MES_598367_1
8216/SEV OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹88,000
Yes
26 Jun 2023
25 May 2023
21 Jun 2023
25 May 2023
19 Jun 2023
13 Jun 2023
26 May 2023 - 5 Jun 2023
Amount
Demolition of brick work (laid flat or on edge) or brick tiles laid bedded & pointed in any mortar in channel, kerbs etc complete all as specified and as directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc and getting out in soft or loose soil complete all as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.
Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
Demolition of cement concrete in ground floors and paving n.exc 15 cm thick (below or above ground level) unreinforced complete all as specified and directed
Taking down old fencing barbed wire complete all as specified and directed.
Dismantling post or struts (wood or RCC) any section including taking out embeded portion and making good disturbed portion, posts embeded in concrete complete all as specified and directed.
Material and labour for brick work with old class 'B' Bricks laid flat, in floor bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.
All as per above item no. 09 here in before but except brick complete all as specified and as directed (old servicebale bricks shall be reused).
Material and labour for brick work with old class 'B' Bricks laid on edges & bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.
All as per above item no. 11 here in before but except brick complete all as specified and as directed (old servicebale bricks shall be reused)
Material and labour for flush pointing to brick walls in cement mortar 1:3 Complete all as specified and as directed.
Material and labour for brick work with Fly ash brick, straight or curved on plan exceeding 6m mean radius built in CM (1:4) complete as specified and directed.
Material and labour for brick work with Fly ash brick, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar (1:6) on other than fair face of brick wall including mixing of W.P.C. as directed and finished even and smooth without using extra cement complete as specified and directed. Note : WPC shall be measured seperately.
Supply only integral water proofing compound complete all as specified and directed.
Material and labour for rendering 20 mm thick in cement mortar 1:4 on fair face of brick wall and finished even and smooth without using extra cement complete as specified and directed.
Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregated) as in surface channels and drains complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B-0 with (using 12.5mm graded aggregate) as in benching, coping fillets etc including necessary form work where ever required all complete as specified and as directed.
Material and labour for finishing fair concrete surfaces even and smooth with using extra cement complete as specified and as directed.
Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred stop ends complete as specified and as directed.
Excavation in post hole each n.exc. 0.5 cum and getting out in soft/loose soil incl returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering removing surplus soil to a distance n.exc 50m and making good surfaces complete all as directed.
Material and labour for PCC 1:3:6 type C2(using 40mm graded crushed stone aggregated) as in foundation filling and mass concrete all as specified.
Supply and fixing in repairs razor edge concertina coil, 600 mm dia, consisting of spirals with sharp edged tape of 0.5mm thick, crimped to 2.6 mm dia high tensile steel wire duly galvanized as per IS 4454 with scrapper barb having 51 spirals with 125 chips(when streched to a length of 6 meter, weight of each coil shall be 8 to 9 Kg appoximately ) and fixed to MS frame work 'Y' shaped and placed at 1.5 m apart and tied with GI staples/clips to retain horizontal including provision of necessary bolts, nuts etc complete all as specified and directed.
Material and labour for Reinforced concrete pipes of 450 mm dia , class NP2, laid and jointed complete with collars as specified as directed by engr-in-charge
Supply and fixing galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanished MS wire, staples or steel pins etc (Each line wire to be measured separately.)
All as per item No. 27 here in before but only fixing in repairs except materials etc complete all as specified and directed (old servicebale barbed wire to be used)
Supply and fixing for angles or tee sections, fixed independently , without connecting plates etc as in splited end fencing post Fe 410-W (Gde-E-250) quality A including drilling holes
Supply and fixing mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be filled with washers and one hexagonal or square nut 5 to 10mm dia shank and exc 5cm but n exc 10cm long all as specified and as directed.
Supply only chain link fencing with 4mm dia galvanised steel wire ,size of mesh 100mmx100mm
Fixing only chain link fencing including line wires , any mesh, size and type to any type of standard, rails , straining bolts, etc including provision of binding wire
Supply and fixing mild steel flat iron (conforming to Fe -410- 0 or Fe-310-0) for securing fencing post including drilling holes, for screwing bolts etc complete.
Material and labour for preparation of new steel and iron surfaces of any description any in width or girth not otherwise described and applying two coats of aluminium paint over priming coat of red oxide primer complete all as specified and as directed.
Material and labour for mild steel Round bar 10 mm dia and over cut to length bent to shape required including hook bending and binding with suitable size GI wire to be fixed with chain link fencing securing with clips or weding all as specified and directed.
Material and labour for high density Polyethelene (HDPE) pipe of 40mm dia of pressure rating 6 Kgf/Sqcm laid in trenches/floor complete all as specified and directed.
Material and labour for applying two coats of Synthetic enamel paint over a coat of red oxide primer on new steel surface n exe 10cm in width or girth complete all as specified and directed.
Material and labour for RCC type B0 Nominal Mix (1:2:4) (12.50 mm graded aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork as required complete all as specified and directed (Rainforcement shall be mesured and paid separately).
Materials and Labour for TMT bars 8 to 10 mm dia as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
LIBERAL ENGINEER CONSTRUCTION
TAPASH SAHA
M S ALOK SAHA
SRI SURAJIT SENGUPTA
ASSOCIATED TRADING CORPORATION
M/S DUTTA & DAS ENGINEERING CO.
M/S TARAN INFRACON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .