SPECIAL REPAIR TO BLDG NO T-30 AND T-31 OF SECTION HOSP CHHEOKI, EX MIL HOSP PRAYAGRAJ UNDER GE WEST PRAYAGRAJ

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.

M&L for 30mm thick flush shutter,solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood glazed and skelton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8, clause 8.24(a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification & drawing, complete all as specified and directed.

S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and directed.

M&L in repair for fabrication and fixing of powder coated aluminium door with frame of section size 85mm x 44.50mm x 1.56mm thick, shutter with top & bottom rail of section 113mm x 44.45mm x 1.56mm thick and stiles and middle rails of section 85.5mm x 44.45 x 1.56mm thick with suitable locking arrangement with lock (Make Godrej/link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings , glazing clips rubber packing for air lock purpose, anodised aluminium snap beading screw for fixing glass panel in the same shutter covered with fully selected quality tinted glass 5mm thick with rubber packing each sutter shall be provided with two Nos decorative type aluminium handle of 200mm long complete all as specified and directed.

M&L in repair for fabrication and fixing of powder coated anodised window and ventilator openable type with frame of section 85mm x 44.50mm x 1.56mm with shutter style and rail orf powder coated aluminium section of size 47.62mm x 44.45mm x 1.62mm including joining cleat for fixing builder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip beading screw etc for fixing glass panes in framesshutter strip beading screw etc for fixing glass panes in frame shutter covered with fully selected quality glass 4mm thick with rubber packing complete each shutters of window shall be provided with one aluminium tower bolt and one handle of size 150mm, two stainless steel hinges of size 100mm, aluminium stay 01 No, 2 nos 150mm aluminium tower bolt with etc complete all as specified and directed.