Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹73,200
Closing Date
22 Feb 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Sridhar.S
Replacement of age old 11KV MCVCB Power gear make Switch gears with new MEI make 1I/C,5F,1BC at 66/11KV Substation Pandavapura TL&SS Division Mysore on PTK Basis
KPTCL/2023-24/EL/WORK_INDENT675
KPTCL/2023-24/EL/WORK_INDENT675
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL SEE Works and Mantainance Circle Mysuru
4 documents required · 2 mandatory · 2 optional
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Similar nature/type of works of the same voltage class or above class of voltage specified in the scope of work or similar nature of work in KPTCL/ESCOMs/ Public Sector undertakings etc.,need to be participated in the tender(For Detailed Tech criteria Ref NIT)
FINANCIAL CAPABILITIES:For the purpose of this particular Bid, Bidders shall meet the following minimum criteria: Minimum Average Annual Turnover(MAAT) of the bidder for preceding three yearsending on March or Decemberas the case may be, shall not be less than Ref NIT whichis calculatedasnotedbelow, Rs(1.5 x estimated cost) Completion period in years(Ref NIT for Financial Criteria)
The essential minimum Qualifying requirement for are as follows.Refer IFB-11.2. a)The Bidder or his consortium partner should possess valid Super grade Electrical Contractors License issued by the Government of Karnataka as on the date of opening of techno-commercial bid.
Bidders shall upload relevant document as mention in Techo comm sheet
₹1,830
₹73,200
15 Feb 2024
15 Feb 2024
23 Feb 2024
22 Feb 2024
Supply Portion for the work of Replacement of age old 11KV MCVCB Power gear make Switch gears with new MEI make 1I/C,5F,1BC at 66/11KV Sub-station Pandavapura,TL&SS Division Mysore on PTK Basis
11KV XLPE UG Cable of 1core x 1000 sqmm
11KV Heat shrinkable termination kit for XLPE Cable of 1*1000 sqmm indoor
11KV Heat shrinkable termination kit for XLPE Cable of 1*1000 sqmm outdoor
11kV NCT of ratio 1200-800/1-1-1A (for 500 MVA swg)
11KV XLPE UG Cable of 3core x 400 sqmm for feeders (3Feeder)
11KV Heat shrinkable termination kit for XLPE Cable of 3x400for 3feeder (3indoor)
11KV Heat shrinkable termination kit for XLPE Cable of 3x400
11KV XLPE UG Cable of 3core x 240 sqmm for feeders
11KV Heat shrinkable termination kit for XLPE Cable of 3x240
11KV Heat shrinkable termination kit for XLPE Cable of 3x240
LTAC panel (indoor), 415V as per technical specifications comprising of voltmeter and ammeter ,1I/C MCCB 200A+2No's .3 phase 63 A O/G SFU, +2No's 3 Phase 32A O/G SFU 100A+ 6No's 3 Phase 16A SFU etc. C...
DC distribution panel(indoor)As per technical Specifications comprising of earth fault indicator , indication circuit of AC mains failure , 1 no 100A SFU for I/G +12NO'S 32a SFU for O/G
Supply of 3Phase PT fuse Unit panel with 32Amps HRC Fuse base and limks -01,No(incomer)20Amps HRC Fuse base and links,stud type terminal block-08sets,outdoor type (App.Size:900*900*275mm)with angular ...
Control Cable-19 core 2.5 Sqmm
Control cable: 4core 10Sqmm
Control Cable: 4core 6Sqmm
Control Cable: 4 core 2.5 Sqmm
1.1kv class 4C X 70sqmm Armaured Alu cable with glands/lugs/ferrrals
10kV 5KA Station type lighting arrestor Polymeric type with GROUND DISCONNECTOR
Pad clamps. Suitable for rabbit/coyote
11kV GOS S/B 400Amps
Coyote ACSR Conductor
DP Structure with 9.0mtr RCC Pole
H frame set for GOS mounting
Aluminium Lugs 240Sqmm
Aluminium Lugs 150Sq mm
9Mtr RCC DP for Transformer Structure
Al Lead wire 95Sqmm
Guy set Complete with No 15 strain insulator & Concreting materials
PVC Pipe 50mm dia, supply and fixing
PVC bend 50mm dia , supply and fixing
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded alround the pipe using cast iron welding ele...
Supply of GI bolt and nuts, washers of Different sizes
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Terminal Blocks (knife type)
Current Cable - 2.5 Sq-mm multistrand copper wire for CT termination
(Each color 15mtrs-R-Y-B)
Voltage Cable - 2.5 Sq-mm multistrand copper wire for PT termination
(Each color 5mtrs-R-Y-B-N)
Control Cable - 10 Copper core x 1.5sqmm
Signal Cable - 10 Copper core x 0.5sqmm
1.5 Sqmm Grey wire for interfacing of DI and DO
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm
C-type channel of size 50x100x50x6mm
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
CT TB's - 6 nos for each panel
Erection portion for the work of Replacement of age old 11KV MCVCB Power gear make Switch gears with new MEI make 1I/C,5F,1BC at 66/11KV Substation Pandavapura TL&SS Division Mysore on PTK Basis
11 Kv MCVCB Incomer Panel 500 MVA 25 kA ,1600A.With CTs of 1200-800/1-1-1A and PTs
11 Kv MCVCB Bus coupler 500 MVA 25 kA ,1600A
11 Kv MCVCB Feeder Panel 500 MVA 25 KA ,1250A (With CTs of 400-200A/1-1A)
11 Kv MCVCB Feeder Panel 500 MVA 25 KA ,1250A (With CTs of 200-100A/1-1A)
1250A Feeder panel (200/100/1-1A) Released
1250A Feeder panel (200/100/1-1A) Re errection
11 Kv MCVCB Feeder Panel for capacitor Bank 500 MVA 25 kA ,1250A. (With CTs of 200-100A/1-1A) Releasing
11 Kv MCVCB Feeder Panel for capacitor Bank 500 MVA 25 kA ,1250A. (With CTs of 200-100A/1-1A) Re errection
11kV NCT of ratio 1200-800/1-1-1A (for 500 MVA swg)
11KV XLPE UG Cable of 1core x 1000 sqmm Tr 65mtr*4Run
11KV Heat shrinkable termination kit for XLPE Cable of 1*1000 sqmm indoor
11KV Heat shrinkable termination kit for XLPE Cable of 1*1000 sqmm outdoor
11KV XLPE UG Cable of 3core x 400 sqmm for feeders (3Feeder)
11KV Heat shrinkable termination kit for XLPE Cable of 3x400for 3feeder (3indoor)
11KV Heat shrinkable termination kit for XLPE Cable of 3x400 for 3feeders (3outdoor)
11KV XLPE UG Cable of 3core x 240 sqmm for feeders(4Feeder+1CB)
11KV Heat shrinkable termination kit for XLPE Cable of 3x240 for 4feeders+1cap bank indoor
11KV Heat shrinkable termination kit for XLPE Cable of 3x240 for 4feeders+1cap bank outdoor
LTAC panel (indoor), 415V as per technical specifications comprising of voltmeter and ammeter ,1I/C MCCB 200A+2No's .3 phase 63 A O/G SFU, +2No's 3 Phase 32A O/G SFU 100A+ 6No's 3 Phase 16A SFU etc. C...
DC distribution panel(indoor)As per technical Specifications comprising of earth fault indicator , indication circuit of AC mains failure , 1 no 100A SFU for I/G +12NO'S 32a SFU for O/G
Control Cable: 19 core 2.5 Sq mm
Control Cable: 4core 10Sqmm
Control Cable: 4core 6Sqmm
Control Cable: 4 core 2.5 Sqmm
1.1kv class 4C X 70sqmm Armaured Alu cable with glands/lugs/ferrrals
10kV, 5KA Station type lightining arrestor Polymeric type with GROUND DISCONNECTOR
11kV GOS S/B 400Amps (Replcing)
DP Structure with 9.0mtr RCC Pole (Replacing)
H frame set for GOS mounting
9Mtr RCC DP for Transformer Structure
Releasing &re errection of 63kva Aux Transformer
Re errection of 63kva Aux Transformer
Releasing of 400A DB GOS Of Aux Tr
Errection of 400A DB GOS Of Aux Tr
Releasing LT protection kit for 63kva Tr
Errection LT protection kit for 63kva Tr
Guy set Complete with No 15 strain insulator & Concreting materials
Releasing C&R panel alignment and fixing properly to foundation base including movenent from the point of unloding to point of errection
Re errection C&R panel alignment and fixing properly to foundation base including movenent from the point of unloding to point of errection
Releasing of Battery charger and wiring
Re errection of Battery charger and wiring
Earth Work excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in dept...
Refilling available earth around pipe lines cable in layers not exceeding 20 cms, in depth compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cos...
Supplying and laying of MS flats, 50x6mm, welding and applying ACB paint to welded portion and covering without sodium bentonite clay, as per the drawing/standard specification(88+55as per R&D)
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded alround the pipe using cast iron welding ele...
Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,(12+33 as per R&D report)
Grounding of equipment with 50x6mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecti...
Earthing name plates for new earting pits(12+33as per R&D)
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Control Cable - 10 Copper core x 1.5sqmm
Signal Cable - 10 Copper core x 0.5sqmm
1.5 Sqmm Grey wire for interfacing of DI and DO
(20 mtrs for each panel)(20x10=200mtr)
CT TB's - 6 nos for each panel
Configuration of RTU and Engineering along with validation of data at SLDC
Assisting inTesting and commissioning including wiring: 11KV MCVCB Panel indoor switchgear
Assisting inTesting and commissioning including wiring:NCT
Assisting inTesting and commissioning including wiring:De-wiring of C&R panel assisting in testing and commissioning (2Tr+2RTCC)Control panel
Assisting inTesting and commissioning including wiring:Re wiring of C&R panel assisting in testing and commissioning (2Tr+2RTCC)Control panel
Assisting inTesting and commissioning including wiring:De-wiring of Transformer MB,Bucholls relay OLTC upto control panel and assisting in testing and commissioning by RT
Assisting inTesting and commissioning including wiring:Re wiring of Transformer MB,Bucholls relay OLTC upto control panel and assisting in testing and commissioning by RT
Dismantling portion for the work of Replacement of age old 11KV MCVCB Power gear make Switch gears with new MEI make 1I/C,5F,1BC at 66/11KV Substation Pandavapura TL&SS Division Mysore on PTK Basis
Releasing of 11kV old switch gear 1I/c+5F+1AP+1BC panel including movement from the point of relising to point of loading
Releasing of 11kV NCT
Releasing of 11kv rooster GOS (F8,F9,F10,F11)
Releasing of controle cable( diffrent sizes 19core,4 core, 2core etc)
Releasing of 11kV UG cables (1*1000sqmm and 3*240sqmm)
Releasingof old DP with RCC pole of Aux Transformer
Releasing of old DP with RCC pole (F2+F5+2idle)
Loading of 11kv switchgear (1In+5Feeder+1 CB bre+1AP) including CTs,PTs,UGcable ,CC.Cable and bus structure etc
Un Loading of 11kv switchgear (1In+5Feeder+1 CB bre+1AP) including CTs,PTs,UGcable ,CC.Cableand bus structure etc
Transportation of released MCVCBs CTs,PTs and 11Kv structurs etc from site to stores using 10MT Lorry upto 250kms
Civil Portion for the work of Replacement of age old 11KV MCVCB Power gear make Switch gears with new MEI make 1I/C,5F,1BC at 66/11KV Substation Pandavapura TL&SS Division Mysore on PTK Basis
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm
including the cost of materials, labour charges, required tools and plants etc., complete...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
Mild steel tubes electric resistant or induction butt welded ERW
Heavy mazdoor for removing and respreading of jelly
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking to the appropriate disposal area
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and laying to required line and slope roofing with semicorrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and...
Providing and fixing ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, includin...
Replacement of age old 11KV MCVCB Power gear make Switch gears with new MEI make 1I/C,5F,1BC at 66/11KV Sub-station Pandavapura, TL&SS Division Mysore on PTK
11 Kv MCVCB Incomer Panel 500 MVA 25 kA ,1600A.With CTs of 1200-800/1-1-1A and PTs
Releasing of 11kV old switch gear 1I/c+5F+1AP+1BC panel including movement from the point of relising to point of loading
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
11KV XLPE UG Cable of 1core x 1000 sqmm
11 Kv MCVCB Bus coupler 500 MVA 25 kA ,1600A
Releasing of 11kV NCT
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
11KV Heat shrinkable termination kit for XLPE Cable of 1*1000 sqmm indoor
11 Kv MCVCB Feeder Panel 500 MVA 25 KA ,1250A (With CTs of 400-200A/1-1A)
Releasing of 11kv rooster GOS (F8,F9,F10,F11)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
11KV Heat shrinkable termination kit for XLPE Cable of 1*1000 sqmm outdoor
11kV NCT of ratio 1200-800/1-1-1A (for 500 MVA swg)
11 Kv MCVCB Feeder Panel 500 MVA 25 KA ,1250A (With CTs of 200-100A/1-1A)
Releasing of controle cable( diffrent sizes 19core,4 core, 2core etc)
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
11KV XLPE UG Cable of 3core x 400 sqmm for feeders (3Feeder)
1250A Feeder panel (200/100/1-1A) Released
Releasing of 11kV UG cables (1*1000sqmm and 3*240sqmm)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
11KV Heat shrinkable termination kit for XLPE Cable of 3x400for 3feeder (3indoor)
1250A Feeder panel (200/100/1-1A) Re errection
Releasingof old DP with RCC pole of Aux Transformer
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
11KV Heat shrinkable termination kit for XLPE Cable of 3x400
11 Kv MCVCB Feeder Panel for capacitor Bank 500 MVA 25 kA ,1250A. (With CTs of 200-100A/1-1A) Releasing
Releasing of old DP with RCC pole (F2+F5+2idle)
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
11KV XLPE UG Cable of 3core x 240 sqmm for feeders
11 Kv MCVCB Feeder Panel for capacitor Bank 500 MVA 25 kA ,1250A. (With CTs of 200-100A/1-1A) Re errection
Loading of 11kv switchgear (1In+5Feeder+1 CB bre+1AP) including CTs,PTs,UGcable ,CC.Cable and bus structure etc
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
11KV Heat shrinkable termination kit for XLPE Cable of 3x240
11kV NCT of ratio 1200-800/1-1-1A (for 500 MVA swg)
Un Loading of 11kv switchgear (1In+5Feeder+1 CB bre+1AP) including CTs,PTs,UGcable ,CC.Cableand bus structure etc
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
11KV Heat shrinkable termination kit for XLPE Cable of 3x240
11KV XLPE UG Cable of 1core x 1000 sqmm Tr 65mtr*4Run
Transportation of released MCVCBs CTs,PTs and 11Kv structurs etc from site to stores using 10MT Lorry upto 250kms
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
LTAC panel (indoor), 415V as per technical specifications comprising of voltmeter and ammeter ,1I/C MCCB 200A+2No's .3 phase 63 A O/G SFU, +2No's 3 Phase 32A O/G SFU 100A+ 6No's 3 Phase 16A SFU etc. C...
11KV Heat shrinkable termination kit for XLPE Cable of 1*1000 sqmm indoor
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm
including the cost of materials, labour charges, required tools and plants etc., complete...
DC distribution panel(indoor)As per technical Specifications comprising of earth fault indicator , indication circuit of AC mains failure , 1 no 100A SFU for I/G +12NO'S 32a SFU for O/G
11KV Heat shrinkable termination kit for XLPE Cable of 1*1000 sqmm outdoor
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
Supply of 3Phase PT fuse Unit panel with 32Amps HRC Fuse base and limks -01,No(incomer)20Amps HRC Fuse base and links,stud type terminal block-08sets,outdoor type (App.Size:900*900*275mm)with angular ...
11KV XLPE UG Cable of 3core x 400 sqmm for feeders (3Feeder)
Mild steel tubes electric resistant or induction butt welded ERW
Control Cable-19 core 2.5 Sqmm
11KV Heat shrinkable termination kit for XLPE Cable of 3x400for 3feeder (3indoor)
Heavy mazdoor for removing and respreading of jelly
Control cable: 4core 10Sqmm
11KV Heat shrinkable termination kit for XLPE Cable of 3x400 for 3feeders (3outdoor)
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking to the appropriate disposal area
Control Cable: 4core 6Sqmm
11KV XLPE UG Cable of 3core x 240 sqmm for feeders(4Feeder+1CB)
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Control Cable: 4 core 2.5 Sqmm
11KV Heat shrinkable termination kit for XLPE Cable of 3x240 for 4feeders+1cap bank indoor
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
1.1kv class 4C X 70sqmm Armaured Alu cable with glands/lugs/ferrrals
11KV Heat shrinkable termination kit for XLPE Cable of 3x240 for 4feeders+1cap bank outdoor
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
10kV 5KA Station type lighting arrestor Polymeric type with GROUND DISCONNECTOR
LTAC panel (indoor), 415V as per technical specifications comprising of voltmeter and ammeter ,1I/C MCCB 200A+2No's .3 phase 63 A O/G SFU, +2No's 3 Phase 32A O/G SFU 100A+ 6No's 3 Phase 16A SFU etc. C...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Pad clamps. Suitable for rabbit/coyote
DC distribution panel(indoor)As per technical Specifications comprising of earth fault indicator , indication circuit of AC mains failure , 1 no 100A SFU for I/G +12NO'S 32a SFU for O/G
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
11kV GOS S/B 400Amps
Control Cable: 19 core 2.5 Sq mm
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Coyote ACSR Conductor
Control Cable: 4core 10Sqmm
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
DP Structure with 9.0mtr RCC Pole
Control Cable: 4core 6Sqmm
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
H frame set for GOS mounting
Control Cable: 4 core 2.5 Sqmm
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Aluminium Lugs 240Sqmm
1.1kv class 4C X 70sqmm Armaured Alu cable with glands/lugs/ferrrals
Providing and laying to required line and slope roofing with semicorrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and...
Aluminium Lugs 150Sq mm
10kV, 5KA Station type lightining arrestor Polymeric type with GROUND DISCONNECTOR
Providing and fixing ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, includin...
9Mtr RCC DP for Transformer Structure
11kV GOS S/B 400Amps (Replcing)
Al Lead wire 95Sqmm
DP Structure with 9.0mtr RCC Pole (Replacing)
Guy set Complete with No 15 strain insulator & Concreting materials
H frame set for GOS mounting
PVC Pipe 50mm dia, supply and fixing
9Mtr RCC DP for Transformer Structure
PVC bend 50mm dia , supply and fixing
Releasing &re errection of 63kva Aux Transformer
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded alround the pipe using cast iron welding ele...
Re errection of 63kva Aux Transformer
Supply of GI bolt and nuts, washers of Different sizes
Releasing of 400A DB GOS Of Aux Tr
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Errection of 400A DB GOS Of Aux Tr
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Releasing LT protection kit for 63kva Tr
Terminal Blocks (knife type)
Errection LT protection kit for 63kva Tr
Current Cable - 2.5 Sq-mm multistrand copper wire for CT termination
(Each color 15mtrs-R-Y-B)
Guy set Complete with No 15 strain insulator & Concreting materials
Voltage Cable - 2.5 Sq-mm multistrand copper wire for PT termination
(Each color 5mtrs-R-Y-B-N)
Releasing C&R panel alignment and fixing properly to foundation base including movenent from the point of unloding to point of errection
Control Cable - 10 Copper core x 1.5sqmm
Re errection C&R panel alignment and fixing properly to foundation base including movenent from the point of unloding to point of errection
Signal Cable - 10 Copper core x 0.5sqmm
Releasing of Battery charger and wiring
1.5 Sqmm Grey wire for interfacing of DI and DO
Re errection of Battery charger and wiring
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm
Earth Work excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in dept...
C-type channel of size 50x100x50x6mm
Refilling available earth around pipe lines cable in layers not exceeding 20 cms, in depth compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cos...
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
Supplying and laying of MS flats, 50x6mm, welding and applying ACB paint to welded portion and covering without sodium bentonite clay, as per the drawing/standard specification(88+55as per R&D)
CT TB's - 6 nos for each panel
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded alround the pipe using cast iron welding ele...
Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,(12+33 as per R&D report)
Grounding of equipment with 50x6mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecti...
Earthing name plates for new earting pits(12+33as per R&D)
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Control Cable - 10 Copper core x 1.5sqmm
Signal Cable - 10 Copper core x 0.5sqmm
1.5 Sqmm Grey wire for interfacing of DI and DO
(20 mtrs for each panel)(20x10=200mtr)
CT TB's - 6 nos for each panel
Configuration of RTU and Engineering along with validation of data at SLDC
Assisting inTesting and commissioning including wiring: 11KV MCVCB Panel indoor switchgear
Assisting inTesting and commissioning including wiring:NCT
Assisting inTesting and commissioning including wiring:De-wiring of C&R panel assisting in testing and commissioning (2Tr+2RTCC)Control panel
Assisting inTesting and commissioning including wiring:Re wiring of C&R panel assisting in testing and commissioning (2Tr+2RTCC)Control panel
Assisting inTesting and commissioning including wiring:De-wiring of Transformer MB,Bucholls relay OLTC upto control panel and assisting in testing and commissioning by RT
Assisting inTesting and commissioning including wiring:Re wiring of Transformer MB,Bucholls relay OLTC upto control panel and assisting in testing and commissioning by RT
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ECC_PANDAVAPURA.docx
Tender Document • 0.05 MB
Supply_Pandavapura.pdf
Others - Detailed Est • 0.48 MB
Civil_Pandavapura.pdf
Others - Detailed Est • 0.49 MB
ITB PANDAVAPURA.doc
Tender Document • 0.11 MB
Work on Hand details.doc
Others - Works on Hand • 0.06 MB
IFB_PANDAVAPURA.doc
Tender Document • 0.14 MB
Volume IIA_Final.docx
Tender Document • 0.63 MB
Volume IIB_Final.docx
Tender Document • 0.26 MB
Annexure.doc
Tender Document • 0.19 MB
NIT Pandavapura.docx
Tender Document • 0.10 MB
Dismantling_Pandavapura.pdf
Others - Detailed Est • 0.43 MB
technocom_sheet.xls
Techno-Commercial Worksheet • 0.03 MB
SCC_PANDAVAPURA.docx
Tender Document • 0.06 MB
GCC_PANDAVAPURA.docx
Tender Document • 0.05 MB
Errection_Pandavapura.pdf
Others - Detailed Est • 0.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .