SPECIAL REPAIR TO P-75 BUILDING IN CQA (EE) TECHNICAL COMPLEX AUNDH CAMP, PUNE UNDER GE (MH AND RH) KHADKI

Amount

Taking down chowkats and frame exc 1.5 sqm and n. exc 4.0 sqm incl shutter without taking off shutters from frame and removing from site complete all as specified and directed by Engr-in-charge.

Taking down chowkats and frame n exc 1.5 sqm incl shutter without taking off shutters from frame and removing from site complete all as specified and directed by Engr-in-charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed by Engr-in-charge.

Demolition of Brickwork, solid block or stone/ boulder masonry, built in cement/ lime mortar including all quoins, arches, pillars, etc, and including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismantling water tanks of any discription or capacity 1000 ltrs and removing to store complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

Demolition of cement Concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated perforated 12mm Size 595 x 595 mm of approved texture, with semi perforated 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in?Charge.

M&L for PCC(1:3:6) type C1 using 20 mm graded stone aggregate as in coping, filling of chowkat incl necessary form work and finished even and smooth without using extra cement all as specified and directed.

M&L for Pre-cast cement concrete block masonry type C1 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in CM 1:6, complete all as specified.

S&F in repairs Steel rolling shutters of 1mm thickness of laths with out ball bearing, as specified including top cover, anchoring rod, hasp and staple, ball bearing, spring and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complite all as specified

S&F in repairs of Safety lever locks mild steel with 4 levers for rolling shutters

Taking down cement/ cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

M&L for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 with sagol finished even surface all as specified and directed by EIC

M&L for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of ceiling in CM 1:4 with finished even surface all as specified and directed by EIC

M&L for Rendering 15mm thick, on fair faces on stone masonry surfaces or surfaces walls in CM 1:4 incldg WPC finished even & smooth all as specified and directed by EIC Note:- WPC shall be measured seperately

M&L for providing water proofing plaster at the junction of wall and slab at chajjas, lintels etc, of average thickness 20mm in CM (1:3) with WPC, finished even and smooth without using extra cement all as specified and directed. Note:- WPC shall be measured seperately

Supply only Integral waterproofing compound

Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face complete all as specified and directed by Engr-in-charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

Ditto as above item but in riser, step, skriting, dados and piller overs 10mm thick plastering in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) finished even and fair in levelling course for laying tiles over it as complete all as specified and directed by Engr-in-charge.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) 75 mm thick as in sub-floors, sub-bases, floors and paving, etc complete all as specified and directed by Engr-in-charge.

M&L for coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15 mm thick in CM 1:6 complete all as specified and directed by Engr-in-charge.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles laid over cement plaster 10 mm thick in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15 mm thick in CM 1:6 complete all as specified and directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, window cill and other similar situations complete all as specified and directed by Engr-in-charge.

M&L for Cement concrete type D2 1:4:8(40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for Reinforced cement concrete 1:2:4 type B1 (nominal mix), using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate in chajjas complete all as specified and directed by Engr-in-charge.

S&F of TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

All as per above item but 8mm dia TMT bars

Ditto all as per above item but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surface complete all as specified and directed by Engr-in-charge.

Form work to chullah hoods, chajjas and similar items including edges complete all as specified and directed by Engr-in-charge.

Forming dovetailed cavities, n exc 10cm x 10cm at top and 20cm x 20cm at bottom in concrete cast-in-situ (plain or reinforced) 10CM depth for holding down bolts, etc. for machinery, stanchions, etc. including temporary forms or moulds and carefully grouting round bolts (after fixing) with cement concrete type Bl, 1:2:4 (20mm graded aggregate) or cement mortar 1:3, complete all as specified and directed by Engr-in-charge.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F of Factory Made Solid PVC Moulded Door Shutter,With Particle Board Core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-charge.

M & L for Aluminium anodised barrel tower bolts of stove enamelled blackwith bright bolt and fixed 200mm long complete all as specified and directed by Engr-in-charge.

S&F butt hinges medium weight colled rolled mild steel 100 mm and fixed complete all as specified and directed by Engr-in-charge.

S &F 0f Aluminium alloy, anodised sliding door bolt 300 mm long, plate type,stove enamelled black with bright bolt not less than 12 mm dia with and incld mild steel min of 6 bolts and nuts, 4 on bolt plate and 2 on stapleplate fixed/weldedto door shutter/frame complete all as specified and directed by Engr-in-charge.

M & L for Aluminium handles, cast type, anodised handles stove enamelled blackfor doors 150 mm long all as specified and directed by Engr-in-charge.

S&F Fe-410-W(Gde-E-250) roof trusses (framed), trussed, purlins, crane, gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engr-in-charge.

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

S&F in repairs Tubular towel rail Brass chromium plated , 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repairs of 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs of Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and pinning in end of bracket or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of Vitreous China Urinal, full stall type, white complete including CP waste coupling, CP spreader etc complete all as specified and directed by Engr-in-charge.

S&F in repairs of fancy type Bib taps of 15mm dia of pipe, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.

M&L for 100mm dia Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc complete all as specified and directed by Engr-in-charge. and making good to floor.

S&F in repairs Health faucet brass chromium plated ISI Marked,including connecting decorative pipe and all accessories required for fixing of 15 mm bore of pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs CP 15mm bore 2 way bib cock Make Jaquar catloag no.CON 041 KN etc complete all as specified and directed by Engr-in-charge.

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories)

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

Do as in item above but refixing only

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

Do as in item above but refixing only

S&F 110mm dai PVC (SWR) bends any radius

S&F 75mm dai PVC (SWR) bends any radius

S & F in repairs stopvalves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm dia complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing for following bore of pipe, complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing and removing to store for following bore of pipe, complete all as specified and directed by Engr-in-charge.

M&L for tube medium grade 20 mm dia, galvanized with all fittings fixed complete to wall, ceiling or laid in floors etc. for following dia of pipe,complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connection of 20 mm diain new or old position (walls, ceiling ,floor etc complete all as specified and directed by Engr-in-charge.

M&L for tube medium grade 15 mm dia, galvanized with all fittings fixed complete to wall, ceiling or laid in floors etc. for following dia of pipe, complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connection of 15 mm diain new or old position (walls, ceiling ,floor etc complete all as specified and directed by Engr-in-charge.

S&F in repairs, gun metal globe or gate valves 20 mm dia ,with iron wheel head,screwed both ends for iron pipes complete all as specified and directed by Engr-in-charge.

S & F in repair Rotational moulded polyethylene water storage tanks ( cylindercal veritcal with closed top) hoisted and fixed inposition 1000 ltrs capacity complete all as specified and directed by Engr-in-charge.

S&F in repairs ball brass valve 20 mm dia high pressure with poly-thine float and fly nut for following bore of pipe, complete all as specified and directed by Engr-in-charge.

Preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.

M & L for preperation of new surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engr-in-charge.

M & L for complete removal of existing treatment and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charge.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over 3mm thick wall care putty finished even and smooth complete all as specified and directed by Engr-in-charge.

M&L Complete removal of existing treatment & applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over 3mm thick wall care putty finished even and smooth. complete all as specified and directed by Engr-in-charge.

Preparation of new plastered surfaces on ceiling and applying two coats of white wash all as specified and directed by Engr-in-charge.

M&L for Complete removal of existing treatment on ceiling & applying applying two coats of white wash complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engr-in-charge.

Supply only Rough cast wired glass, 6.4 mm thick exc 0.50sqm but n exc 0.75sqm complete all as specified and directed by Engr-in-charge.

Supply only 3mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed by Engr-in-charge.

S&F of powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-charge.

Removing of old water proofing treatment and cleaning the surface of slab and cleaning with wire brush, removing dust,foreign materials and removing the rubbish off the site to a distance n.exc 100m complete all as specified and directed by Engr-in-charge.

M & L for PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate ) on roof top for maintaining of slope coving,benching etc complete all as specified and directed by Engr-in-charge.

M&L for Rendering 10 mm thick on concrete surfaces of roof in cement plaster in 1:3 CM mixed with WPC @ 3% by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement complete all as specified and directed by Engr-in-charge.. Note :- WPC shall be measured and paid seperately.

M & L for cleaning the plaster /concrete surfaces with wire brushes and applying water proofing treatment ,one coat of bituminious primer @ 0.25 kg per sqm and providing 3 mm APP modified water proofing Membrane weight 3.5 to 4.0 kg /sqm by torch application method including painting entire roof surfaces with one coats of bitumastic aluminous paint complete all as specified and directed by Engr-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit and making good disturbed surfaces of walls, floors etc all as directed.

M&L for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade,PVC Conduit of suitable size on walls/roof/floor etc, ISI marked with suitable accessories , mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , including provision of house switch/regulators etc including plastic enamel sheet 3mm thick for one fan/light /bell point controlled by one switch/bell push , including PVC insulated multistranded copper conductor 1.5 SQ mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by engr in charge for the following

(a) One fan/light point controlled by one switch

(b) One switch socket outlet 5 Amps on independent board

(c) One socket outlet 5 Amps on the same board

All as per Item No 92 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 1.5 sqmm PVC insulated copper cable as earth continuity conductor for one switch socket outlet 15 Amps on independent board complete all as specified and directed by Engr-in-charge.

All as per Item No 92 here-in- before but with 4 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for power Socket on independent board on PVC surface conduit complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs / replacement switch piano type one way 6 Amps complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs / replacement switch piano type 16 Amps all as complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs / replacement socket outlet 2 in1,3 pin 5 Amps complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs / replacement socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type complete all as specified and directed by Engr-in-charge.

Taking down old unserviceable fitting and S & F wall mounted extruded aluminium housing high quality indoor batten LED tube 22 watt colour temperature 6500 K (4" long) lumen 2000 -3000, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge.

S & F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar, including provn for for fixing MCB /Isolators ,concealed in wall and make good disturbed suraface complete all as specified and directed by Engr-in-charge.

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 1.5 sqmm 1100 volt grade drawn into concealed PVC Conduit of suitable size including 1.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge..Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into concealed PVC Conduit of suitable size including 4.0 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge..Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

Taking down old submain wiring and M&L for sub main wiring with two single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 v.olt grade drawn into concealed PVC conduit of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing complete all as specified and directed by Engr-in-charge. Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

Supply and fix MCB SP of capacity 5A - 32A "B' curve complete all as specified and directed by Engr-in-charge.

Supply and fix MCB SPN 40A "B " curve complete all as specified and directed by Engr-in-charge.

Supply and fix MCB TPN 63A " C " curve complete all as specified and directed by Engr-in-charge.

M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including common salt & charcoal black cotton soil as required at site to achieve the earthing result andincluding , excavation earth work etc in any type of soil starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board complete all as specified and directed by Engr-in-charge. . (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge.)

Taking down defective vertical V/TPN DB existing at site S & F Vertical TPN DB IP-43 metal door 6 way CRCA Sheet steel, RAL 9003, powder coated provided with insulated vertical phase bus bars, neutral bars with shroud earth bar sticking saddles, cement spill protector color coded interconnecting wire set cable ties blanking plates and circuit identification labels with provision for MCCB As incomer and SP/TP MCBs as outgoings suitable for 4 pole MCCB 125 Amps included concealed in wall and make good disturbed suraface complete all as specified and directed by Engr-in-charge. . (MCCBs and MCB measured separately)

S & F MCCB 125 Amps , 4 pole, Breaking capacity 16 KA, 415 V adjustable type all as specified of capacity complete all as specified and directed by Engr-in-charge.

Taking down old unserviceable MH bay light S & F high effiicient suspended type 120 watt,230v, lumen 2000 -3000, PF> 0.9, THD less 10% LED bay light of die cast aluminium housing with lens embedded PC cover IP 66 with effficany not less then 120 lm/W, as per IS -10322 , high voltage cut off,open and short circuit protection including constant voltage and current LED drivercomplete all as specified and directed by Engr-in-charge. . (Note: (i) Making arrangement for T & P to fixing of bay light is incluidIng quoted rate. Cat ref : SAUCERGENXPROHBP120WLED757P60DBOLTG or evivalennt

Supply and fix in industrial wall mounted plug socket suitable fotr IP 44 degree of protection of 32 Amps 4 Pole rating 3p+N +E complete all as specified and directed by Engr-in-charge.

M & L for shifting of existing LT UG cable of various sizes from cable trench and relaying on another location on same building and making connecting to new VTPN DB complete all as specified and directed by Engr-in-charge.

Supply and fix ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary platering work and finish with existing wall paint complete all as specified and directed by Engr-in-charge.

S & F fan regulator 120 watt suitable for 1200/1400 mm ceiling fan (Electronic step type) complete all as specified and directed by Engr-in-charge.

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to refixing to the original position after painting complete all as specified and directed by Engr-in-charge.

Taking down exhaust fan 300mm/450mm sweep from any height and bringing down to floor for carrying out repair/ servicing and refixing in position after repairs complete all as specified and directed by Engr-in-charge. Note: Spares will be measured and paid separately

M&L for Spray Painting of Exhaust fan of 300/450 mm sweep with one coat of synthetic enamel paint of same colour including preparation of old surfaces complete including numbering of fans as existing complete all as specified and directed by Engr-in-charge.

Supply and fix exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450 mheavy duty complete all as specified and directed by Engr-in-charge. Note: Rate inclusive of Core cutting for fixing Exhaust fan

VIRENDRA FABRICATORS

sagar construction