Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹4.4 L
Closing Date
22 Jul 2026, 3:00 pm
Annual Zone work for ordinary repair and maintenance of staff quarters and services buildings in the section of ADEN-PLMX
12-2026-27-PLMX-DRM-JAT
12-2026-27-PLMX-DRM-JAT
Open
12 Months
Unknown (Unspecified Location)
₹0
₹4.4 L
30 Jun 2026
30 Jun 2026
8 Jul 2026
Item Breakup - C-USSOR ITEMS
400.00 minimum 1.10 cum bucket capacity Total 343476.00 Item- 2 CHAPTER - 5 : Bridge Works - Misc. S No. Item Description of Item Unit Qty Rate Amount No
500.00 any location. Payment to be done for Horse Hour power of pump multiplied by pumping hours. Total 15830.00
Item Breakup - D-NS ITEMS
NS-1)0983 Fine sand (zone IV)
NS-2) 0773 Unslaked lime
NS-3) 0661 Oxidised mild steel sliding door bolt Each 250x16
NS-4)0699 Anodised Aluminium tower bolt (barrel 10 Nos. type) 250x10 mm
NS-5)0637 Bright finished or black enameled mild 100 steel screws 40 mm Nos.
NS-6) 0639 Bright finished or black enameled 100 mild steel screws 25 mm Nos.
NS-70704 Anodised Aluminium handles 100 mm 10 Nos. with plate 150 x 32 mm
NS-8)0833 Synthetic enamel paint in black or Litre chocolate shade
NS-9)0834 Synthetic enamel paint in all shades Litre except black or chocolate shade
NS-10)1219 M.S. Wire nails
NS-11) 1392 Mirror of superior make glass 60x45 Each cm
NS-12) 1875 White plastic seat (solid) with lid C.P. Each brass hinges and rubber buffers
NS-13) 1923 H.P. or L.P. ball valve with polythene Each floats: 20 mm dia
NS-14) 1922 H.P. or L.P. ball valve with polythene Each floats: 15 mm dia
NS-15) 1947 Vitreous china flat back wash basin Each 630x450 mm
NS-16) 1954 Vitreous china orrisa type W.C. pan Each of size 580 mm
NS-17) 7105 Coloured Pedestal type W.C. pan Each 580x440 mm (European type)
NS-18) 2456 Hydraulic door closer bottle type Each M.S. body with necessary accessories and screws complete
NS-19) 2412 Ply wood 5 ply with commercial ply Sqm on both faces 6 mm thick
NS-20) 2413 12 mm commercial ply
10 NS-21) 2505 Hollock wood in planks cudm
10 NS-22) 1199 Sal wood in scantling cudm JAMMU DIVISION-ENGINEERING/NORTHERN RLY
NS-23) 7029 Galvanised wire mesh of average Sqm width of aperture 1.4 mm and nominal dia of wire 0.63 mm
NS-24) 7105 Coloured Pedestal type W.C. pan Each 580x440 mm (European type)
NS-25) 7117 Semi Rigid PVC waste pipe for sink Each and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
NS-26) 7126 White Vitreous china 10 litre (full Each flush) capacity controlled low level flushing cistern with all fittings
NS-27) 7400 15 mm PTMT bib cock
NS-28) 7407 PTMT push cock 15 mm dia
NS-29) Supply of sodium hypo chloride solution Kg (including chlorine)
NS-30) Supply of national flag of size 20 Ft X 30 Each Ft in 100% knitted polyester (140 gsm) with reinforced super strong nylon webbing on all 3 sides & rope/ toggle sleeve. The work shall be complete in all respects with all labour, material, taxes, misc. and incidental works related to the job upto all heights. The work shall be carried out as per directives of engineer in charge at site to his entire satisfaction. Nothing extra will be paid on any account.
NS-31) 0367 Portland Cement (OPC-43 Grade)
NS-32) 0297 Stone Aggregate (Single size) : 10 cum mm nominal size
N S - 3 3 ) Rendering 12 months service for Per Day maintenance of Railway colonies and other Service buildings including all tools & plants by supplying artisan staff, masons, carpenters , painters , blacksmith, fitters, pump operator, helper / khalasi ,sweepers on all working days in the week excluding Sunday & Holiday etc.along with all tool and equipments. No extra charges will be given to the contractor for transportation of material required for execution of any work. Contractor has to make his own arrangement for transportation of material, man power, tools etc. at all the time during the contract. All the consumable material required i.e. Cement, steel, Wood, bricks, sand, Paint, Sanitary fittings,etc. shall be supplied by the railway. The rates includes cost of Employer's PF contribution, tools and plants prescribed minimum wages by Central Govt. and contractors profit. Work is to be executed as per special condition of contract. Payment will be made on Monthly interval on the basis of man days of working of each of the following category during the monthly period only and as per special conditions of the contract. NS- 33(A) Carpenter (1 No)
NS-33(b)Black Smith (1 No)
NS-33(C) Painter (1 No)
NS-33(d) Plumber (1 No.)
NS-33(e) Manson (1 No)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
STD-2022.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
AdvanceCorrectionSlipsNo.1to10.pdf Correction Slips of GCC
ATTACHMENT
CorrectionSlipNo-1toSTD-2022.pdf
ATTACHMENT
ANNEXURE-VVAVIIB.pdf
ATTACHMENT
ACS11_compressed.pdf
ATTACHMENT
AdvanceCorrectionSlipsNo.1to10.pdf
ATTACHMENT
Download all tender documents and submit your bid