CERTAIN REPAIR / REPLACEMENT OF EXTERNAL ELECTRIC LOW TENSION DISTIBUTION SYSTEM AND INTERNAL WIRING, FITTINGS AND FIXTURES AT KHUNMOH UNDER GE 861 EWS

Amount

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches beyond 1.5 m wide and n.exc. 3 m deep for foundation of poles/stay etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in depth.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified.

M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all ad specified.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

M&L Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in coping including necessary formwork to poles etc complete all as specified.

S & F Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanized MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade incl dismantling of old unsv complete all as specified .

S & F Shackle type insulators, porcelain, vitreous white/ brown or green including galvanised MS strips, bolt, nuts and washer of size 75mm height and 90mm dia, size of strap section 31x3mm and dia of 12 mm for working pressure 1100 volts grade incl dismantling of old unsv complete all as specified

M&L earth wire/guard cradle hexagonal/rectangular fabricated with 4mm dia galvanized mild steel, binding wire incl dismantling of old unsv complete all as specified and directed by Engr-in- Charge.

M&L Aluminium conductors, reinforced (ACSR) conductor of any size for OH lines including stretching, binding wire ,jumpers, line taps etc incl dismantling of old unsv complete all as specified.

Supply and fixing steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31 ( 9 Mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified laying GI pipe light grade for cable protection and fixing to existing pole with flat iron clamp 25x3mm including nuts bolts and washers etc complete of 40mm dia including taking out old unserviceable pole complete all as directed by Engr-in-Charge

Supply & fixing in replacement of Stay assembly complete with accessories as shown in electric plate No. 1 and including loop type insulator white brown or green with over all dimensions 65x90mm, clearance of hole 16mm complete all as specified. Note:- Earth work , PCC shall be measured and paid for separately.

M & L for Cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint incl dismantling of old unsv complete all as specified.

Restretching only the ACSR conductor fixed on over head line pole and tightening the ACSR, taking down the conductor from insulators complete with auth sag and rewinding with insulators in proper position after tightening with new aluminium winding wire of dia 2mm all as specified and directed by Engineer-in -Charge.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 160 Amps with breaking capacity 35/36 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 200 Amps with breaking capacity 35/36 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 250 Amps with breaking capacity 35/36 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 400 Amps with breaking capacity 35/36 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 100 Amps with breaking capacity 25 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified.

Supply & fixing in repair Change over switch Off load 415 volts TPN in sheet metal enclosure of capacity 100 Amps.

Supply & fixing in repairChange over switch Off load 415 volts TPN in sheet metal enclosure of capacity 63 Amps .

Supply & fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 250 Amps.

Supply & fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 160 Amps.

Supply & fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63 Amps.

Supply & fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps.

S&F in repairs 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 35 Sqmm nominal cross section 3.5 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed. Note- Earth work and protection work shall be measured and paid for separately under respective items of BOQ.

Description all as per item No. 29 above but cross sectional area 50 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 29 above but cross sectional area 25 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 29 above but cross sectional area 70 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 29 above but cross sectional area 95 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 29 above but cross sectional area 120 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 29 above but cross sectional area 16 Sqmm 2 core complete all as specified and directed.

Description all as per item No. 29 above but cross sectional area 10 Sqmm 2 core complete all as specified and directed.

Supply and fixing in repair LT Overhead lines on existing poles with XLPE Insulated AB Cable 3-Core x 50 Sqmm + 1 core x 35 Sqmm phase cores twisted around aluminium alloy insulated messenger conductor conforming to IS : 14255 including identification of phase by Ridges provided on the insulation of Phase conductors : 1 ridge for the 1st Phase, 2 Ridges for the 2nd Phase and 3 Ridges for the 3rd Phase and 4 Ridges for Neutral including accessories like Anchor Clamp, Suspension Clamp, Line Connector, service clamp, insulation piercing connectors, (IPC) for Tap from Bare lines ) Dead End, Suspension clamp, I Hook etc complete all as specified and directed by Engr-In-Charge

Taking out from trenches/poles/wall etc LT UG Cable PVC insulated sheathed with multistranded aluminium conductor armoured and relaying after fault rectification duly tested in trenches/Poles/Wall of LT UG Cable of any sizes including Earth work complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated copper conductor (Solid ) of size 20 Sqmm single core served with inner sheathing of PVC tape and overall PVC sheathed in service connections. complete all as specified by the Engineer in charge.

S & F in repair aluminium thimbles 1100 volts suitable for 70 Sqmm to 150 Sqmm cable complete all as specified and directed by EIC.

S & F in repair aluminium thimbles 1100 volts suitable for 25 Sqmm to 50 Sqmm cable complete all as specified and directed by EIC.

S & F in repair aluminium thimbles 1100 volts suitable for 6 Sqmm to 16 Sqmm cable complete all as specified and directed by EIC.

S& F in repair double compression copper stainless gland for fixing armoured cable in panel of size 25 sqmm to 50 sqmm, complete all as directed by Engr-in-charge.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 25 Sqmm to 50 Sqmm 3.5/4 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 70 Sqmm to 120 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable straight through heat shrink type jointing kit 1100 Volts for with jointing material and accessories suitable for 50 Sqmm to 120 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable straight through heat shrink type jointing kit 1100 Volts for with jointing material and accessories suitable for 25 Sqmm to 50 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Trimming of trees branches from electric over head lines and clearing of 2 meter distance horizontal and vertical from outer edge of conductor including removing cut branches 50 Mtr (minimum) away from the place all as directed by Engr-in- Charge. Note: Contractor will ensure shut down on the feeder in writing before commencement of work on electrical lines.

Supply & fixing in replacement of danger notice board 1.6mm thick M.S sheet, vitreous enameled white with letters, figures and conventional skull and bone in signal red colour and fixed with M.S clamps, bolts and nuts of approved size for LT 20x15cm size. by replacing the unserviceable one.

Supply and laying in replacement of synthtic insulating mat of size 2mX1mX19mm ISI marked suitable for 11 KV , all as directed by Engr-in- Charge. Make : Jyoti/National/Jaipuria.

Supply and laying in repairs GI tubing light grade 50mm dia with all fitting laid in trenches or fixed on wall along pole complete for protection of electric cable/strip complete all as specified by Engineer-in-Charge.

All as per srl item No 53 but of 40mm dia light grade GI tubing

M &L for Painting of LT Panel Board complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust/rust including writing the feeding all as directed by Engr-in-Charge

Repair / refixing the cover of the LT panel / bus bar of any size any capacity and DG set canopy door type by means of welding and all accessories prewired incl locking arrangement all as directed by Engr-in-charge.

Supply & fixing in replacement of voltmeter 0-500 volts digital type including taking down old existing unsv all as directed by Engr-in-charge.

Supply & fixing in replacement of Ammeter 0-400Amps digital type including taking down old existing unsv all as directed by Engr-in-charge.

Taking down carefully unserviceable security lights/street lights and perimeter lights from pole/ bldgs and refixing after repairing unsv items such as LED driver and like, complete all as specified and directed by Engineer in Charge. Note : LED drivers shall be measured and paid for separately.

Supply only electronic driver suitable for LED security light 25/30 watt, complete all as specified and directed by Engineer in Charge.

Supply only electronic driver suitable for LED security light 45/60 watt, complete all as specified and directed by Engineer in Charge.

Supply only electronic driver suitable for LED security light 100/120 watt, complete all as specified and directed by Engineer in Charge.

Supply and fixing in repair 2.5 Sqmm three core PVC insulated flexible copper conductor wire from street light terminal box , complete all as specified and directed.

Taking down old/UNSV fluorescent security light/street lights and S&F LED 30 Watt security light Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07 complete all as per directed by EIC. Make Havells Cat Part No ENDURACITYLITEPLATSL30WLED757SASYBOPC or equivalent/CROMPTON GREAVES/GE.

Taking down old/UNSV fluorescent security light/street lights and deposited with MES stores and S&F LED flood light 40 Watt security light fitting pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection complete all as specified and directed by Engineer - in - Charge. Make : C&S Cat product code No ORION-C/50W/W cat part No LTEFC50WHPLED/W or equivalent/CROMPTON GREAVES/GE.

Taking down old/UNSV fluorescent security light /street lights and deposited with MES stores and S&F LED 60 Watt security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IKO7 with 10KV built-in-surge protection device complete all as directed by EIC. Make Havells Cat Part No ENDURAPEARLPLUSSL60WLEDPASYTOPC or equivalent/CROMPTON GREAVES/GE.

Supply & fixing in repair MCB, DP (Double Pole), AC, 240 volts, B series capacity 05 Amps to 32 Amps, 10kA and making connections complete all as specified & directed .

Supply & fixing in replacement of security light timer control switch of size 50CM x 50CM x 40CM, out door type made out of MS sheet 3.15 mm thick factory fabricated, duly powder coated with front door openable heaving pressure lock suitable for and including the followings :- (i) Air break contactor AC 415 volts, 50 HZ 3 phase 65 A with operating coil voltage 220 volts. - 01 No (ii) 24hrs digital timer switch - 01 No (iii) Toggle switch 5 amps 230 volts for auto/manual operation – 01 No (iv) MCCBs TPN , 415 volts 63 Amps, 35 KA- 01 Nos

Supplying installing, commissioning testing in repair LT cubical feeder pillar box out door kiosk type made out of CRCA sheet 3.15mm ,3 phase 4 wire 50 C/S AC with aluminium bus bar of 150 Amps rating fixed on insulators for incoming & outgoing taping complete double door type with locking arrangement fixing on PCC platform with suitable nuts, bolts duly painted with two coats of synthetic enameled paint over a coat of red oxide primer, comprising with MCCB 100 Amps TPN 50Hzs, 25KA ( 01 Nos) in incoming and MCCB 63 Amps TPN, 25KA (01 Nos), MCB 40 Amps SPN C curve (02Nos) cable for service connection complete all as specified.

Supplying installing, commissioning testing in repair LT cubical feeder pillar box out door kiosk type made out of CRCA sheet 3.15mm ,3 phase 4 wire 50 C/S AC with aluminium bus bar of 100 Amps rating fixed on insulators for incoming & outgoing taping complete double door type with locking arrangement fixing on PCC platform with suitable nuts, bolts duly painted with two coats of synthetic enameled paint over a coat of red oxide primer, comprising with MCCB 63 Amps TPN 50Hzs, 25KA ( 01 Nos) in incoming and MCCB 40 Amps TPN, 25KA (01 Nos), MCB 20 Amps SPN C curve (02Nos) cable for service connection complete all as specified.

Supply & fixing in replacement of junction box of size 300x300x250 mm made of MS Sheet 1.6mm thick, front door openable with fixing screw painting with two coats of synthetic enamel powder coated paint over a coat of red oxide including alumn bus bar 4 Nos of size 25x3mm mounted on epoxy based post insulators and drilled holes for connection including 01 Nos MCB SPN 20 Amps , 1 Nos MCBs 06 amps incl magnetic lock system all as required and fixed to poles using MS strip of size 32x6mm and nuts & bolts of required size all as required at site or directed by Engr-in-charge.

Repair/replacement of earthing pit cover 40 mm thick made of RCC 1:2:4 reinforced with XPM weight not less than 4 Kg/Sqm incl 6 mm dia bar handle and angle iron frame of size 40x40x4 mm complete all as specified and directed by EIC.

Supply & fixing in replacement Air termination, single pointed aluminium rod 12mm dia and 300mm long, including necessary fittings and fixtures, complete all as directed by Engr-in-charge.

Supply & fixing in repair GI strip 32x6mm, buried in ground or fixed to wall etc for loop earthing.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6 mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI strip of size 32x6mm with protection pipe of 40mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside regulators/ light fitting/ MCBs serviceable/ unserviceable items for reuse with in the same bldg or deposited to MES store yard

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box all as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-77 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-77 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-77 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead.

M&L concealed Point wiring complete with 1.5 sqmm 1100 graded PVC FRLS (Multistrand) insulated unsheathed copper conductor, PVC conduit not less than 20mm dia concealed, including cutting chases, finishing of slote by means of cement mortar making good to existing surface of the wall and touching with existing colour of wall with three coats and making good disturbed surface complete sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washers with all accessories including single core multistranded copper conductor 1.5Sqmm size cable as earth continuity wire connected to common earth dolly to sunk boxes of /CI/MS terminal boxes / each fitting / fixtures for housing switches, sockets etc for one light / fan/ bell point controlled by one switch one way complete all as specified.

All as per srl item No-81 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-81 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-81 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked or cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for Switch piano flush button single pole one way 5 amps 240 volts

M&L for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts.

M&L for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts .

M&L for Socket outlet 2 in 1, 3 pin, 6 Amps flush type 50 Hz all as specified and directed.

M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts 50 Hz all as specified and directed.

Ceiling rose surface Bakelite 2 to 3 terminals.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site or directed by engineer-in-charge.

S & F Lamp holder insulated body with back plate for batten fittings.

Supply & fixing bell push flush type 6 Amps 240 Volt

Supply & fixing in repair bell/buzzer AC 230 volts single pole

Supply & fixing in repair Plug top 3 pin 15 amps 230 volts.

Supply & fixing in repair Plug top 3 pin 5 amps 230 volts.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified

Supply & fix in repair Rigid non-metallic grade PVC conduit of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc .

Supply & fixing in repair Rigid non-metallic PVC conduit of size 25 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

Supply & fix in repair medium grade PVC casing and capping of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

Supply and fix in replacement cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 1.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted.

Supply and fix in replacement cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 2.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted.

Supply and fix in replacement cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 4 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted.

Supply and laying in repair 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 4 sqmm nominal cross section in service connections

All as per srl item No 107 above but 6 sqmm twin core

Supply and fixing of LED 7 watt pin type bulb complete all as specified and directed by Engr-in-Charge.

S & F in repair decorative box type mirror light LED 8W fixture with in built electronic driver complete with all accessories prewired and connecting electrically to ceiling rose using PVC FRLS insulated and overall sheathed cable Make-Havells Cat Part No LUMILINEBS9WLED830SPCWH or equivalent/C&S/Bajaj

S&F decorative ultra slim linear LED in replacement of 20 Watt , 4 ' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack incl LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube all as specified and directed by EIC. Make : Havells Cat Part No LHDD02102674 or Equivalnet/C&S/Bajaj.

Taking down old Unserviceable Bldg Sec light fitting including supply & fixing New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket incl all accessories all as specified and directed by Engr-in-charge. Make: Havells Cat Part No: LHEWDRP7PN1W025 or equivalent/C&S/Bajaj

Taking down the old UNSV Bed lamp fitting and taken as credit including Supply, Installation, testing and commissioning of LED Wall light with system wattage not more than 4W, using 3W for LEDs. The lumen output of LED shall be (Light source) shall not less than 230 lumens. The housing shall be of aluminium and white color coating. The head of the luminaries shall be adjustable type. The beam angle shall be < 50 deg. Lamp lifetime up to: 15,000 hrs. Total lumen output fixture: > 170 lm. Bulb technology: LED, Safety Extra Low Voltage. Mains power: Range 220 V–240 V, 50-60 Hz. IP code: IP20, protection against objects bigger than 12.5 mm, no protection against water. Class of protection: I - earthed. The luminaries shall be integrated type. The Net weight shall not exceed 0.3 kg. Make: HAVELLS/ SYLVANIA 0050990 or equivalent/C&S/Bajaj

Supply, Installation, testing and commissioning of Surface mounted LED luminary of size 2'x2' with full glow designed luminary > 30% energy saving, maintenance free, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source of 28 W complete all as specified and directed. Make: Havells CAT. No. PLUTONEO 2X2PLR28WLED857S or equivalent/C&S/Bajaj

Supply and install and commissioning new generation post top energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source suitable for pole dia 76mm complete all as specified and directed Make : - Havells Cat part No CORALPT35WLED757PSYMTOPC LHLC19145099 or equivalent/Wipro/GE.

Supply & install environmental friendly, ultra modern, energy saving bulk head 8W in die cast aluminium housing & frosted glass complete all as specified and directed. Cat Part No LHKL01160099 in Havells or equivalent in Philips/Wipro.

Supply install, testing & commissioning ultra slim decorative aluminium casted, recess mounted round fixture in white finish with opal diffuser and electronic driver, suitable for low depth ceiling complete all as specified and directed. Cat Part No 15WLED6000K LHEBMFP7IZ1W015 in Havells or equivalent in Surya/Bajaj.

Supply and fix in repair sheet metal enclosure MCB distribution board, single pole and neutral double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated copper busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated copper busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix in repair MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.

M&L in repair for MCB single pole 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification.

M&L in repair for MCB single pole and neutral 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification.

M&L in repair for MCB single pole and neutral 240 volts 40 to 63 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification.

Supply & Fixing in repair MCB TPN 415 volts, 40-63 amps 'C' Curve 10 kA Capacity all as directed.

Supply and fixing in repair MCCB four pole , 415 Volt, 63 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

S&F in repair ventilating fan of size 250 mm sweep white in colour, Plastic body suitable for 230 Volts 50Hz AC supply including making necessary opening for fixing in the location and making good disturbed surface to match with the existing surface all as specified and directed Note : - Old unsv exhaust fans will be deposited at MES store yard.

Supply and fixing in repair, Metallic body exhaust fan of 230/250 mm sweep, single phase including necessary addn/altn to accommodate at the existing location or making provision by cutting wall and making good the disturbed surfaces , matching with the existing wall all as specified and directed. Note : - Old unsv exhaust fans will be deposited at MES store yard.

Supply and fixing in repair, Metallic body exhaust fan of 300 mm sweep, single phase including necessary addn/altn to accommodate at the existing location or making provision by cutting wall and making good the disturbed surfaces , matching with the existing wall all as specified and directed. Note : - Old unsv exhaust fans will be deposited at MES store yard.

M&L painting of ceiling fan complete , using spray gun, in site with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust complete all as specified and directed

S&F in replacement of capacitor 2 mfd AC 415 volts 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of capacitor 3.15 mfd AC 415 volts 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of capacitor 4 mfd AC 415 volts 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of ball bearing for ceiling fan /exhaust fan any size any make complete and all as specified.

Taking down old heavy model ceiling fan including Supply & Fix 1200 mm sweep ceiling fan of 5 star rating, energy saving model with double ball bearing 230 volts 3 blades white in colour without regulator COMPLETE WITH CANOPY, suitable DOWN ROD all as directed Note : - Old unsv fans will be deposited at MES store yard.

Rewinding of AC ceiling fan/wall mounting fan motor as existing at site any make with super enameled copper winding wire any gauge from 0.315mm to 0.193mm including cutting of old burnt winding. Sleeve work varnishing with `B' class insulation varnish, connection with flexible wire of appropriate size two core copper wire up to connector block qty of copper winding wire not less than 350 grams and not more than 500 grams per fan motor complete and all as specified.

Rewinding of exhaust fan motor any size, from 225 to 400 mm sweep with supper enameled copper wire of any size ranging from 0.500mm to 0.285 mm including necessary cutting of old burnt winding wire, cleaning of slots and provision of necessary threading/sleeve work and taking out connection in lead with PVC copper wire of appropriate size up to connector block complete and all as specified

Removing the Geysers from building & depositing to MES Store yard , Supply and fixing Geyser of 25 Ltrs capacity 5 star rating including nuts, bolts connection pipe and gaskets etc, and fixing in same position and testing all as specified and directed Note : Old unsv geyser will be deposited at MES Store yard.

Removing the Geysers from building & depositing to MES Store yard , Supply and fixing Geyser of 35 Ltrs capacity 5 star rating including nuts, bolts connection pipe and gaskets etc, and fixing in same position and testing all as specified and directed Note : Old unsv geyser will be deposited at MES Store yard.

Taking down carefully geyser 25/35/50 liters capacity from wall after unscrewing nuts/bolts etc. and again refixing in position after necessary repair and replacement of spare parts including testing etc complete all as specified and directed by Engr-in-Chrg (spare parts shall be measured and paid for separately under respective items

Supply only heating element AC 230 Volt of rating 1500W ISI mark as per existing any type complete all as specified and directed by Engr-in-Charge

Supply only heating element AC 230 Volt of rating 2000W ISI mark as per existing any type complete all as specified and directed by Engr-in-Charge

Supply only thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius complete all as specified and directed by Engr-in-Charge

Supply only PVC connection pipe heavy duty suitable for hot water to bear the temp of 100 degree centigrade with outlet and inlet connection brass adopters , washers of size 450 mm long 15 mm dia bore complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair Automatic source change over with current limiter 30/20A ACCL complete all as specified and directed by Engr-in-Charge. Make Havells Cat Part No DHABOSN3020 OR Equivalent/ Legrand/L&T

Supply and fixing in repair Change over switch on load 415 volts SPN in sheet metal enclosure of capacity 32Amps.

Supply and fixing in repair Change over switch on load 415 volts SPN in sheet metal enclosure of capacity 63Amps.

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63Amps.

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100Amps.

Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. Supply and fix hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing.

Supply and fixing replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps all as specified and as directed.

FG CONSTRUCTION

M/S MOHAMMAD SHABAN AND CO

M/S SHIMAR STAR GLACIER