CONSTRUCTION OF SABHAMANDAP AND CONCRETE PAVING BLOCK IN KEDARESHWAR TEMPLE PREMISES AT-PUNANDGAON TQ-MAJALGAON

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. SSR OF 2022-23 ITEM NO. 46.11 & PAGE NO.296

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansBd.A.1 Page No. 259 SSR OF 2022-23 ITEM NO. 21.02 & PAGE NO.153

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete (Lift upto 1.50 m) By Mechanical Means Bd.A.2 Page No. 259 SSR OF 2022-23 ITEM NO. 21.06 & PAGE NO.153

Providing soling using 80 mm size trap metal in 15 cm layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO.157

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Bd. E. 1 Page No. 287 SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.175

Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Bd.F.3 Page No. 298 and B.7, Page No.38 SSR OF 2022-23 ITEM NO. 25.11 & PAGE NO.178

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd. F.5 Page No. 300 and 8.7, Page No. 38 SSR OF 2022-23 ITEM NO. 25.31 & PAGE NO.179

Providing and laying Cast situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss: metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix Bd.F.6 Page No. 300 and B.7, Page No.36 SSR OF 2022-23 ITEM NO. 25.5 & PAGE NO.181

Providing second class Burnt Brick masonry with conventional/ 1.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Bd.G. 1 Page No. 313 SSR OF 2022-23 ITEM NO. 27.01 & PAGE NO.197

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete. Bd.A.11 Page No. 263 SSR OF 2022-23 ITEM NO. 21.37 & PAGE NO.157

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd. F.8 Page No. 302 and B.7, Page No.38 SSR OF 2022-23 ITEM NO. 25.7 & PAGE NO.182

Providing and fixing in position TMTFE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306. SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.188

Providing sand faced plaster externally in cement mortar using approved screened sand, in all pasitions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd. L.7 Page No. 369 55R OF 2022-23 ITEM NO. 32.11 & PAGE NO.209

Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. Bd. M.3 Page No. 380 SSR OF 2022-23 ITEM NO. 33.04 & PAGE NO.213

Providing and applying white-wash in one coat on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc, complete Bd.P.1 Page No. 411 SSR OF 2022-23 ITEM NO. 36.02 & PAGE NO.227

Providing and applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Bd. P.5 Page No. 413 SSR OF 2022-23 ITEM NO. 36.11 & PAGE NO.227

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Bd.0.8/Page No.406 SSR OF 2022-23 ITEM NO. 35.15 & PAGE NO.224

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete A directed by Engineer in charge SSR OF 2022-23 ITEM NO. 33.51 & PAGE NO.218

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete A directed by Engineer in charge SSR OF 2022-23 ITEM NO. 33.51 & PAGE NO.218

Providing and casting in situ / ready mix PCC M15 grade of trap metal for coping to head walls /parapet including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural / VSI standard Artificial Sand) Bd-E-7 SSR OF 2022-23 ITEM NO. 11.3 & PAGE NO.83

Please Enable Macros to View BoQ information