REPAIR / MAINTENANCE OF INTERNAL ELECTRIFICATION AND MISC ITEMS AT MD AND OTM ACCN IN JP LINE, ML LINE AND PP LINE UNDER GE ALWAR

Amount

Taking down carefully, copper / aluminium unserviceable /perished point wiring any type for light/ fan/ socket or power complete including fittings such as switches, ceiling roses, pendant holders, lamp holders, bracket holders, regulators sockets, light fittings etc, and making good to disturbed surfaces of wall/floor/ceiling etc, complete, all as specified and directed.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes terminal boxes in wall for mounting fittings like switches, sockets, regulators etc with and including 3mm thick phenolic laminated sheet top cover complete all as specified & directed.

All as per description of serial item No. 2.00 above but for one fan point controlled by one switch and regulator

All as per description of serial item No. 2.00 above but for one ceiling fan / exhaust fan point controlled by one switch

All as per description of serial item No. 2.00 above but for one bell/buzzer point controlled by one bell push

All as per description of serial item No. 2.00 above but for one light point controlled by two, two way switch

All as per description of serial item No. 2.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch, 5 Amp on same board

All as per description of serial item No. 2.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch, 5 Amp independent board

All as per description of serial item No. 2.00 here-in-before but for one 3 pin socket outlet 15/16 Amps with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour

All as per description of serial item No. 2.00 here-in-before but for one 3 pin socket outlet 15/16 Amps with 4.00 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour

S&F switch piano flush type single pole, one way 5/6 Amp 230 Volts, Moduler type, 1 module complete all as specified and directed.

S&F switch piano flush type single pole, one way 15/16 Amp 230 Volts, Moduler type, 1 module complete all as specified and directed.

S&F socket outlet for 2 & 3 pin 5/6 Amp flush type 230 Volt, moduler type, 2 module complete all as specified and directed.

S&F socket outlet for 2 in 1, 3 pin 5/6 & 15/16 Amp, 230 Volt, module type, 2 module complete all as specified and directed.

S&F PVC white cover plate with base frame, 2 module complete all as specified and directed.

S&F PVC white cover plate with base frame, 3 module complete all as specified and directed.

S&F PVC white cover plate with base frame, 4 module complete all as specified and directed.

S&F PVC white cover plate with base frame, 6 module complete all as specified and directed.

S&F PVC white cover plate with base frame, 8 module complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.

S&F switch piano flush type, single pole, two way, 5/6 Amp, 230 Volts complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15/16 Amp, 230 Volts complete all as specified and directed.

S&F socket outlet for 2 & 3 pin, 5/6 Amp, flush type 240 Volt complete all as specified and directed.

S&F socket outlet for 2 in 1, 3 pin 5/6 & 15/16 Amp, flush type 240 Volt complete all as specified and directed.

S&F bell push flush type, 5/6 Amp 240 Volts complete all as specified and directed.

S&F elctric bell Ding dong music type, AC, 230 volts, single pole complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose surface Bakelite 65x50mm two or three terminals complete all as specified and directed.

S&F fan regulators electronic step up type socket size and connecting up, ISI marked flush type, 120 watt, 230 volts complete all as specified and directed.

S&F Modular fan regulator, step up type, 120 W, 250 Volts, 2 module, ISI marked and connecting up complete all as specified and directed.

Supply, installing and testing out door wheather proof bus bar chamber of size 60 cm x 40 cm x 40 cm made out of 3.15mm MS sheet having one side openable hinged door shutter with locking arrangement & Provn of two No 60 cm long 40x40x6mm angle iron legs welded and 4 Nos aluminium bus bar of 200 Amp rating and incoming MCCB 63 Amps adjustable thermal magnetic release type complete errected on ground with necessary PCC 1:3:6 type C2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland, lugs/thimbles complete including taking down old unserviceable bus bar chamber complete all as specified and directed.

S&F decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube 6000K of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting including dismantling & taking down old tube light fitting with / without tube rod complete all as specified & directed. Make :- Havells Cat Part No LHEXBLP7PN1W018 or equivalent of Syska / Crompton Greaves as approved by GE Note: (i) The existing tube light fitting shall be carefully disconnected, taking down and carefully deposited to E/M store yard by the contractor . (ii) Unserviceable tube light fittings & tube rod retrieved shall be given in Schedule of credit after inspection by Engineer-in-Charge or his rep.

S&F decorative ultra slim square box profile liner LED lighting fixture with extended polycarbonate, environmental friendly, energy efficient all including LED tube 9 watt, 6000 K to 6500 K of model E LITE PRIDE and connecting up with and including white coloured flat/round twin core PVC insulated, PVC sheathed copper conductor cable of required size and length, from light fitting to ceiling rose specified & directed. Make :- Havells Cat Part No LHEXBLP7IN1W009 or equivalent of Syska / Crompton Greaves as approved by GE

Fixing only 1x40/28/20 Watt, tube light fittings/LED light fittings any type, any make, any size on wall/ceiling etc and connecting up with flexible three core PVC insulated, PVC sheathed copper conductor cable of required size and length, from light fitting to ceiling rose complete all as specified and directed.

S&F as in repairs recess 36 watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixture in white finish suitable for low ceiling height 3in1, 3K, 4K, 6K with connecting up with and including white coloured flat/round twin core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEBLOPNUZ1W018 or equivalent of Syska / Crompton Greaves as approved by GE

S&F as in repairs surface LED luminaries 1x20 watt, 230 volts, 50 Hz, new E-LITE Triyca batten, A colour changing LED batten with options of 3000 K, 4000 K and 6500 K, all in one fixture with connecting up with and including white coloured flat/round twin core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBYPNIN1W020 or equivalent of Syska / Crompton Greaves as approved by GE

S&F as in repairs decorative bed side light wall mounting light SS finish with opal glass diffuser suitable for 1 x 8 watt TU retrofit CFL with & including 1 x 8 watt CFL, E14 TU, prewired and connecting up complete all as specified and directed. Make :- Havells Cat Part No LHJC02108499 or equivalent of Syska / Crompton Greaves as approved by GE

S&F as in repairs surface decorative wall/ceiling mounted LED 12 watt fixture with electronic driver suitable for indoor applications all as specified and directed. Make :- Havells Cat Part No LHEOFJP7CUZ1W012 or equivalent of Syska / Crompton Greaves as approved by GE

S&F as in repairs surface mounted square shaped LED downlighter 12 watt, 4000K with drable housing with alum heat sink with diffuser to give glare free light removable driver all as specified and directed. Make :- Havells Cat Part No EDGEPROSQDLR12WLED840S or equivalent of Syska / Crompton Greaves as approved by GE

S&F as in repairs recess mounted compact vertical round shaped downlighter with removal driver suitable low ceiling height, LED 5 Watt, 6000 K with connecting up with PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed.

S&F as in repairs recess mounted compact vertical round shaped downlighter with removal driver suitable low ceiling height, LED 12 Watt, 6000 K with connecting up with PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed.

S&F as in repairs sheet metal enclosures, double door type, suitable for fixing MCB,s, TPN with 200 Amps rated bus bar, 4 way, 415 volts complete all as specified and directed.

S&F as in repairs sheet metal enclosures, double door type, suitable for fixing MCB,s, TPN with 200 Amps rated bus bar, 8 way, 415 volts complete all as specified and directed.

S&F as in repairs sheet metal enclosures, double door type, suitable for fixing MCB,s, SPN with 200 Amps rated bus bar, 4 way, 240 volts complete all as specified and directed.

S&F as in repairs sheet metal enclosures, double door type, suitable for fixing MCB,s, SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.

S&F as in repairs sheet metal enclosures, single door type, suitable for fixing MCB,s, SPN with 200 Amps rated bus bar, 2 way, 240 volts complete all as specified and directed.

S&F MCB 32 Amps, single pole & neutral, 230 Volts complete all as specified and directed.

S&F MCB 6 to 32 Amps, single pole, 230 Volts complete all as specified and directed.

S&F MCB 32 to 63 Amps, Triple pole & neutral, 415 Volts complete all as specified and directed.

S&F as in repairs 2nd class hard wood rectangular block open recessed of size 45x30x5 cm depth with 3mm thick hylum/Bakelite sheet on top grouted with 4 Nos bolts for DB complete all as specified and directed.

S&F as in repairs 2nd class hard wood rectangular block open recessed of size 30x25x5 cm depth with 3mm thick hylum/Bakelite sheet on top grouted with 4 Nos bolts for DB complete all as specified and directed.

M&L for sub main wiring with two runs of 6 sqmm (nominal area) size main cable & one run of 6 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked (IS: 694) cables, drawn through & including suitable size of heavy duty PVC conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed on surfaces of wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring complete all as specified and directed. Note:- 02 runs of 6 sqmm size, 01 run of 6 sqmm size cable & conduit with accessories shall be measured as one run length for payment purpose.

M&L for sub main wiring with two runs of 4 sqmm (nominal area) size main cable & one run of 4 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked (IS: 694) cables, drawn through & including suitable size of heavy duty PVC conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed on surfaces of wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring complete all as specified and directed. Note:- 02 runs of 4 sqmm size, 01 run of 4 sqmm size cable & conduit with accessories shall be measured as one run length for payment purpose.

M&L for sub main wiring with four runs of 6 sqmm (nominal area) size main cable & two run of 6 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked (IS: 694) cables, drawn through & including suitable size of heavy duty PVC conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed on surfaces of wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring complete all as specified and directed. Note:- 04 runs of 6 sqmm size, 02 run of 6 sqmm size cable & conduit with accessories shall be measured as one run length for payment purpose.

M&L for sub main wiring with four runs of 10 sqmm (nominal area) size main cable & two run of 10 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked (IS: 694) cables, drawn through & including suitable size of heavy duty PVC conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed on surfaces of wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring complete all as specified and directed. Note:- 04 runs of 10 sqmm size, 02 run of 10 sqmm size cable & conduit with accessories shall be measured as one run length for payment purpose.

S&F as in repairs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&F as in repairs LED driver for LED lights, 18 watt input voltage AC 90-265 V DC output voltage 42-62 V complete all as specified and directed.

S&F as in repairs LED driver for existing tube light fixture, 18 watt input voltage complete all as specified and directed.

S&F as in repairs LED driver for existing tube light fixture, 9 watt input voltage complete all as specified and directed.

S&F as in repairs CFL 36 watt 4 pin type for PL-L light complete all as specified and directed.

S&F Ecoclick starter for FTL light fitting 18 watt working in 110 V - 130 V complete including taking down old unserviceable starter complete all as specified and directed.

S&F as in repairs on load changeover switch 100 Amp, AC, 3 Phase, 4 pole, 415 volts complete all as specified & as directed.

S&F as in repairs MCCB 4 pole, 100 Amp rating rupturing capacity 25 KA, 415 volts grade AC, 50 Hz magnetic fixed type and making connections complete all as specified & directed.

S&F as in repairs MCCB 4 pole, 63 Amp rating rupturing capacity 25 KA, 415 volts grade AC, 50 Hz magnetic fixed type and making connections complete all as specified & directed.

Disconnecting electric connections and taking down existing electric meter from wooden board and S&F new wooden board and reconnecting and refixing exisitng meter to the location complete all as specified and directed.

S&F heavy duty PVC pipe 50 mm dia with accessories & fixing clips, screws, rawl plugs etc complete all as specified and directed.

S&F PVC channel 100 mm wide slotted clip on type with PVC caping cover for wiring/cabling in bunches complete all as specified and directed.

S&F as in repairs switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified & as directed.

S&F as in repairs switch piano flush type, single pole, two way, 5/6 Amp, 230 Volts complete all as specified & as directed.

S&F as in repairs switch piano flush type, single pole, one way, 15/16 Amp, 230 Volts complete all as specified & as directed.

S&F as in repairs bell push flush type, 5/6 Amp 230 Volts complete all as specified & as directed.

S&F as in repairs socket outlet for 2 & 3 pin, 5/6 Amp, flush type 230 Volt complete all as specified & as directed.

S&F as in repairs socket outlet for 2 in 1, 3 pin 15/16 Amp, flush type 230 Volt complete all as specified & as directed.

S&F as in repairs electric bell ding dong type, AC, 230 volts, single pole complete all as specified & as directed.

S&F as in repairs lamp holder, angular PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F as in repairs fan regulators electronic step up type, 0-4 step of cap 100W, 250 Volts AC, socket size and connecting up, ISI marked flush type , 230 Volts complete all as specified and directed.

S&F as in repairs ceiling rose surface Bakelite 65x50mm two or three terminals complete all as specified and directed.

S&F as in repairs electronic ballast (Choke) 40 Watt 230 Volt suitable for FTL fitting complete all as specified and directed.

S&F as in repairs Bipin Holder rotary type suitable for 36/40 Watt FTL fitting and connecting up complete all as specified and directed.

S&F as in repairs sheet metal enclosures, double door type, suitable for fixing MCCB 125 Amps, TPN with 200 Amps rated bus bar, vertical DB 4 way TPN including incoming MCCB 125 Amps, 415 volts complete all as specified and directed.

S&F as in repairs MCB 32 to 63 Amps, single pole & neutral, 230 Volts complete all as specified and directed.

S&F as in repairs MCB 6 to 32 Amps, single pole, 230 Volts complete all as specified and directed.

S&F as in repairs MCB 32 to 63 Amps, Triple pole & neutral, 415 Volts complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete including taking down old unserviceable earthing all as specified & as directed.

S&F as in repairs sealed lead acid battery capacity 65 AH , 12 Volt complete all as specified and directed. Model Powersafe plus No EP 65-12 of Make Exide or equivalent of Microtec / Ambron as approved by GE

Servicing of UPS 10 KVA on existing location, opening connection, checking IC and replacement of Unserviciable spare parts if any Mass pad, Control card, Power card etc complete all as specified and directed.

S&F LED bulb energy saving 10 / 11 W complete all as specified and directed.

S&F 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed weather proof service connection one twin core cable flat or circular of aluminium stranded conductors of size 16 Sqmm 2 core all as specified.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles complete all as specified. Note :- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes etc not exc 10Sqm on plan and not exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

M & L for brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.

M & L for dry sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note :- Thickness after punning shall be considered for payment.

M&L for Galvanized iron tubing, 50mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level n. exc 1.50 metre above the starting point complete all as specified.

ALAKNANDA ENTERPRISES

GAR CONSTRUCTIONS